Need help with installation? Our AI assistant has read this installation manual and can help you find the right page and walk you through each step.
The Launch Tech USA TLT210-XT is a multi-purpose full asymmetric 10,000 lb capacity two-post lift engineered to deliver maximum versatility for professional service shops. This ALI/ETL Certified clear floor lift is both height and width adjustable, and may be installed in either standard or rotated column configurations—allowing you to accommodate everything from compact cars to the largest SUVs and trucks.
Designed for shops that demand flexibility, the TLT210-XT features adjustable column height (providing an extra 6" of vertical adjustment) and adjustable column width (an additional 6" for narrow service bays), making it easy to custom-fit the lift to your shop's exact ceiling height and bay dimensions. The lift's asymmetric arm design enables front-to-rear load positioning for optimal vehicle balance and easy door access.
Built for heavy-duty daily use, the TLT210-XT includes a 2 HP motor, single point lock release for simultaneous column disengagement, and a heavy-duty arm restraint system with oversize rugged steel gears, pins, and springs for trouble-free operation. Double telescoping screw pads offer 6.5" of height adjustment, and stackable foot pad extensions (two 6" tall and two 3" short) handle extra-tall applications with ease.
The TLT210-XT lifts vehicles to a maximum lifting height of 73" (without adapters) in just 54 seconds, giving technicians fast and safe access to undercarriage service points. With a drive-thru clearance ranging from 88" (rotated) to 98.4" (standard), this lift accommodates a wide variety of vehicle types and service requirements.
This lift comes with a one (1) year limited warranty and meets all ALI safety standards. To view the lift inspection guide, click here.
The TLT210-XT is engineered for maximum installation flexibility. The lift's adjustable column height (providing an extra 6" of adjustment) makes it easy to install in shops with varied ceiling heights, while the adjustable column width (an extra 6" of adjustment) allows for installation in narrower service bays—perfect for retrofitting existing spaces or maximizing shop layout efficiency.
The lift can be installed in two distinct asymmetric configurations: standard (columns facing each other) or rotated (columns offset). This dual-configuration capability allows you to optimize vehicle positioning based on your shop's layout and workflow requirements. The drive-thru clearance is 98.4" in standard configuration and 88" in rotated configuration, ensuring ample space for a wide range of vehicle types.
With a minimum ceiling height requirement of 143.5" and a cylinder full height of 145.2", the TLT210-XT fits into most professional shop environments without requiring structural modifications.
The TLT210-XT is built for demanding professional environments. The lift features a heavy-duty arm restraint system with oversize rugged steel gears, pins, and springs for reliable, trouble-free operation. Each lift arm is rated to support up to 2,500 lbs, and the double telescoping screw pads (used with or without rubber pads) offer 6.5" of height adjustment for complete vehicle coverage.
The single point lock release system allows technicians to disengage both column locks simultaneously, improving efficiency and reducing downtime between lifts. The lift reaches its full 73" maximum lifting height in just 54 seconds, ensuring fast cycle times in high-volume shops.
For extra-tall vehicles or specialized service applications, the TLT210-XT includes stackable foot pad extensions—two 6" tall and two 3" short extensions—providing additional height adjustment as needed. The lift also includes rubber door guards for added vehicle protection and outer hose guards to protect hydraulic hoses from damage during operation.
The lift's front arm reach ranges from 23.6" to 43.5", and the rear arm reach extends from 38.6" to 61.8", giving you exceptional flexibility in positioning vehicles for optimal balance and door access.
Expand the versatility of your TLT210-XT with optional spin-up frame cradle pads (P/N TLT210-SPNCA). This set of four spin-up pads provides additional vehicle support and positioning options for specialized service tasks.
Adjustable Column Height
Provides an extra 6" of height adjustment for ease of installation with various ceiling heights.
Adjustable Column Width
Provides extra 6" of width adjustment for narrow service bays to custom fit your shop.
Rubber Door Guards
Provides added security against door damage.
Outer Hose Guards
Protects hydraulic hoses from damage.
Stackable Foot Pad Extensions
Extra tall applications are no problem with the two 6" tall and two 3" short extensions.
Single Point Lock Release
Allows technicians to disengage both column locks simultaneously.
Heavy-Duty Arm Restraint System
Oversize rugged steel gears, pins, and springs for trouble free operation.
Double Telescoping Screw Pads
Used with or without rubber pads offering 6.5" adjustment for complete vehicle coverage.
Standard Asymmetric
Lift installed with columns facing each other.
Rotated Asymmetric
Lift installed with columns offset - rotated.
Optional Accessory Available
Optional Spin Up Pads
Set of 4 spin up frame cradle pads P/N TLT210-SPNCA
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs
above for complete specs, dimensions, and detailed feature breakdowns.
Structural Warranty:
The following parts and structural components carry a five year warranty:
Limited One-Year Warranty:
Tuxedo Distributors, LLC offers a limited one-year warranty to the original purchaser of Auto Lift Lifts and Wheel Service in the United States and Canada. Tuxedo Distributors, LLC will replace, without charge, any part found defective in materials or workmanship under normal use, for a period of one year after purchase. The purchaser is responsible for all shipping charges. This warranty does not apply to equipment that has been improperly installed or altered or that has not been operated or maintained according to specifications.
Other Limitations:
This warranty does not cover:
Upon delivery of goods, the Customer has sole responsibility to notify Auto Lift Distributors of missing parts or concealed damage within 72 hours of receipt. If no notification of missing parts or of concealed damage is made, all parts will be purchased after 72 hours has passed.
Upon receipt, the customer must visually inspect the equipment for any potential freight damage before signing clear on the shipping receipt. Freight damage is not considered a warranty issue and therefore must be noted for any potential recovery with the shipping company.
The customer is required to notify Tuxedo Distributors, LLC of any missing parts within 72 hours. Timely notification must be received to be covered under warranty.
Tuxedo Distributors, LLC will replace any defective part under warranty at no charge as soon as such parts become available from the manufacturer. No guarantee is given as to the immediate availability of replacement parts.
Tuxedo Distributors, LLC reserves the right to make improvements and/or design changes to its without any obligation to previously sold, assembled or fabricated equipment.
There is no other express warranty on the Tuxedo lifts and this warranty is exclusive of and in lieu of all other warranties, expressed or implied, including all warranties of merchantability and fitness for a particular purpose.
To the fullest extent allowed by law, Tuxedo Distributors, LLC shall not be liable for loss of use, cost of cover, lost profits, inconvenience, lost time, commercial loss or other incidental or consequential damages.
This Limited Warranty is granted to the original purchaser only and is not transferable or assignable.
Some states do not allow exclusion or limitation of consequential damages or how long an implied warranty lasts, so the above limitations and exclusions may not apply. This warranty gives you specific legal rights and you may have other rights, which may vary from state to state
Ranger
Ranger
SVI International Inc
Launch
US Dollars