US Dollars
Understanding Whip Industries Two Post Lift Configurations
When selecting a two post lift from Whip Industries, understanding the difference between symmetric, asymmetric, and all-symmetric (hybrid) configurations is essential for optimizing your shop workflow:
- Symmetric Lifts typically feature arms that extend equally to the front and rear of the vehicle, providing balanced weight distribution. These are often ideal for trucks, SUVs, and vehicles with evenly distributed weight.
- Asymmetric Lifts generally have arms positioned slightly behind the posts, allowing for better door clearance and easier entry/exit from the vehicle. This configuration is particularly useful for modern sedans and coupes where technician access is a priority.
- All-Symmetric (Hybrid) Lifts offer the versatility of symmetric arm reach with the flexibility to work on a wider range of vehicle types, combining benefits of both configurations.
Many Whip models include quick-change height adapters, allowing technicians to adjust lifting points for different vehicle ground clearances and frame configurations.
ALI Certification: Why It Matters
Whip Industries two post lifts featured in our selection typically carry ALI (Automotive Lift Institute) certification, a critical third-party safety validation. ALI certification confirms that a lift has been independently tested and meets rigorous standards for structural integrity, safety mechanisms, and performance. This certification is often required for insurance purposes and demonstrates Whip Industries' commitment to producing equipment that meets or exceeds industry safety benchmarks. When evaluating any automotive lift, ALI certification should be considered a fundamental requirement, not an optional feature.
Standard vs. Extra-Tall Models: Choosing the Right Height
Whip Industries offers both standard and extra-tall (24" leg extension) versions of their popular lift models. Standard lifts typically feature overall heights around 141.5 inches with floor-to-shutoff heights of approximately 135 inches, providing sufficient clearance for most passenger vehicles and light trucks. The extra-tall models, with overall heights of approximately 165.5 inches and floor-to-shutoff heights near 159 inches, are designed for shops that need additional overhead clearance for lifted trucks, commercial vehicles, or facilities with higher ceiling heights. Consider your facility's ceiling clearance, typical vehicle height, and future service needs when selecting between standard and extended configurations.
Four Post Lifts: Storage and Service Versatility
Whip Industries' four post lift options provide different solutions than two post models. These lifts excel in vehicle storage applications, alignment work, and situations where drive-on convenience is prioritized. The WFP12R-E extended length model accommodates longer wheelbase vehicles with its 192-inch runways, while the heavy-duty WFP30R is engineered for commercial trucks and larger vehicles with its 30,000 lb capacity and 24-inch wide runways. Four post lifts typically include features like rolling jack rails for undercarriage access, anti-sway kits for stability, and fold-down approach ramps for easy vehicle loading.
Pre-Installation Considerations
Before purchasing any automotive lift, several critical factors must be evaluated to ensure proper installation and safe operation. As noted in the product specifications, Whip Industries lifts typically require concrete floors with minimum thickness generally of 4 inches, reinforced with steel rebar and a minimum compressive strength of approximately 3,000 PSI. However, specific requirements can vary by model and local building codes. Additionally, consider electrical requirements, overhead clearance (accounting for both the lift height and the vehicles being serviced), and adequate space for vehicle positioning and technician movement. Professional site evaluation and installation by qualified technicians is strongly recommended to ensure compliance with all safety standards and manufacturer specifications.
Important Note: All specifications, features, dimensions, weight capacities, electrical requirements, installation requirements, and certifications mentioned on this page are general information and vary by model. Always verify exact specifications by checking individual product listings and manufacturer documentation before making a purchase decision. Consult with professional installers to verify that your facility meets all necessary requirements before purchase.
Whip Industries Car Lifts
Are you looking for a trusted lift that you can truly depend on for any vehicle in your shop? Look no further, you have found the perfect solution. Whip Industries car lifts are known for being reliable, affordable, and extremely effective for car shops. They allow you to get tasks done quickly, in a safe manner your employees can appreciate. We encourage you to look into our selection!
Check out our In-Depth Lift Comparison and Car Lift Safety Features articles.
Our selection of Whip Industries car lifts has multiple styles of lifts that are very strong and dependable. They have a weight capacity that ranges from 10,000 to 12,000 pounds, which should comfortably work for the cars that are brought into your shop. We have two and four post lifts that work extremely well. You will easily be able to lift any type of vehicle in the position you need, to get any task done. You will improve production levels by saving time and energy that can be focused on getting quality work done for your clients. Our choices include rugged steel construction, quick change height adapters, and a two-piece adjustable bridge that is known for being very convenient and versatile. We take pride in these lifts being made right here in the USA.
We offer many unique styles that are proven in the industry and known for working well in any type of mechanic shop. They are recommended by several top professionals and make it easy to get your work done in a timely manner. Whether you offer simple or complex car services, these lifts improve shops in many aspects. Our choices are easy to set up and use for any of your employees. With our reliable customer service and affordable prices, you won’t find a better value anywhere else.
This is a brand that is known for excellence, and their car lifts certainly aren’t any different. Whip Industries car lifts will provide everything you need, and then some! There are no more excuses when it comes to not having a quality car lift in your shop. Invest in one of the best right here at Best Buy Auto Equipment!
Frequently Asked Questions
Q: Who makes Whip lifts?A: Whip lifts are made by Whip Industries, a third generation family-owned business located in Fort Worth, Texas. One of the company’s main focuses is producing and manufacturing goods in the United States in order to bolster our country’s economy. With a team of loyal customers and dedicated employees, Whip Industries has been committed to crafting high-quality products for the last 30+ years.
Q: What is a lift in automotive?A: A “lift” in the automotive industry refers to a car lift, which is a large machine that raises vehicles so that service technicians can inspect them and fix any problems with ease. Lifts are especially helpful when technicians need to see the underside of a vehicle or change a vehicle’s tires. There are many different types of lifts, but the four main ones are scissor lifts, single post lifts, 2 post lifts, and 4 post lifts.
Q: How thick does the concrete need to be for a car lift?A: Check your lift’s manual to see how thick your concrete should be. According to the Whip Industries 2 post lift product manual, “The floor where the lift is to be installed must be a minimum of 4” thickness of concrete. Concrete must be reinforced with steel rebar with a minimum compressive strength of 3,000 PSI. Failure by the purchaser to provide the recommended mounting surfaces could result in personal injury, property damage and/or unsatisfactory lift performance.”