In BusinessSince 1987
TO SERVE THE ENTIRE COUNTRY
The iDEAL 7000TLX is a low-profile, lightweight, portable 7,000 lb. capacity low-rise scissor frame contact tilt lift designed for unibody type passenger & small sport utility vehicles.
The 3,500-lb. capacity BL-3500SLX Quick Jack car lift is perfect for small-wheelbase vehicles. As the lightest model in our lineup, its frames are easy to transport in and out of the garage or wherever else you need to work. Have fun wrenching at home, and shave off seconds at the track. Great for Miatas!
5000TL portable car lift adds an extra 3" bringing the lift height to an impressive 24 inches. This enhancement increases access to the undercarriage of the vehicle and provides an overall increase to your comfort and capability
5000TLX is an extended-length lift with jack support locations that extend 6 inches farther than our TL models. QuickJack is the best car lift for your home garage or shop, and with the additional reach of the EXT, you’ll service more vehicles than ever. Great for light-duty trucks and SUVs.
7000TL now lifts to an impressive 24.5" lift height. Reinforced upper frame rails give this lift enough strength to effortlessly raise passenger cars, light-duty trucks, and SUVs. For higher ground-clearance vehicles, don't forget to pick up our truck adapter set. The extra spacers will offer additional lifting height!
7000TLX is a 7,000-lb. capacity, extended-length truck lift that's specially made for raising heavy-duty powerhouses. Its 66" lift point reach is ideal for long-wheelbase vehicles, trucks and SUVs. It even fits under most sports cars and sedans.
2,000 lb. lift capacity single column storage lift great for working on lawnmowers, motorcycles and also storing equipment.
Low-rise portable scissors lift with power unit stand. 6,000lbs lift capacity with mechanical safety lock release. Includes Power unit stand. One of the best Scissor Vehicle Lifts on the market today!
The 6,000-lb. capacity 6000ELX is a super-long portable car lift with one of the widest lift point spreads in the industry. For drivers of some electric cars or vehicles with exceptionally long wheelbases, these frames are the only way to go. Ideal for detailing and wheel.
Mid-rise scissor lift with control cabinet. 6,000lbs lift capacity with hydraulic safety locks, dual hydraulic cylinders with a built-in flow restrictor. Includes stop switch at 300mm from ground and alarm tone when coming down from 300mm to ground. Includes Power unit stand.
The Atlas® LR-06P portable 6,000 lb. low rise lift is the perfect addition to any garage that needs a quick sure fire method to raise a car to perform wheel service. The Atlas® LR-06P low rise lift has a rubber top lifting surface and a set of four high density rubber blocks that help to protect the lift points of most vehicles.
The BP-9 2-post lift, floor base-plate, 9,000lbs lifting capacity, chain-drive, with 4 three- stage arms, 1.5" , 2.5" extension adapters included, single-point safety release, automatic arm restraints..
New single piece column two post floor plate lift.
The Light Duty Two Post Lift is an economy designed open top / floor plate vehicle lift designed for easy vehicle lifting.
Mid-rise models lift cars, vans and light-duty trucks. They are ideal for tire, wheel and brake related repairs, collision repair work and new car preparation.
Light Duty Two Post Lift is an economy designed open top / clear floor vehicle lift.
New single piece column asymmetric two post vehicle lift manufactured by Autolift.
Mid-rise portable scissor lift with power unit stand (portable dolly). 6,000lbs lift capacity with new type mechanical safety lock which can be released freely by hand.
Easy frame lifting on padded runways. Great for wheel and brake work, tire and wheel changing as well as new car preparation. One of the best Car Pad Car Lifts on the market today!
Dannmar’s DLR-6 low-rise lifts helps you easily raise cars weighing up to 6,000 lbs. and even do so using less shop area. These work well in both commercial shops and for car enthusiasts who need to raise a vehicle for most maintenance type repairs. With the ability to raise the vehicle a little more than two feet, oil changes, tires, brakes, and lower body detailing becomes easier.
The Atlas® 9KOH is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price. The Atlas® 9KOH can be adjusted to two different height settings: 11' 6" or 11' 10".
The Atlas® 9KBP is a base-plate two-post lift designed for low ceiling garages. The total column height of 111 ½” (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.
The Atlas® BP8000 is a base-plate two-post lift designed for low ceiling garages. The total column height is 108″ (9′).
You haven't experienced state-of-the-art compact lifting convenience until you've used the BendPak LR-60. This 6,000-lb. capable lift comes loaded with an electric / hydraulic power system, multi-position safety locks, rubber lifting blocks, a dropped crossbar for added clearance and a heavy-duty steel channel frame. One of the best Specialty Car Lifts on the market!
The OH-9 2-post lift offers clear-floor, direct chain-drive, with Super-Asymmetric® arms, 1.5", 2.5" and 5" extension adapters included, single-point safety release, overhead safety shut-off device, automatic arm restraints. One of the best 2 Post Car Lifts on the market today!
Low-rise portable scissors lift with power unit stand. 10,000lbs lifting capacity with mechanical safety lock release.
New single piece column symmetric two post car auto lifts manufactured by Autolift.
The Atlas 6PL 6,000 lb. low rise lift is ideal for quick service work situations involving tire and brake work. The AP-6PL comes with non-slip pads that provide a great contact surface and a set of four high density rubber blocks that help protect lifting points on most vehicles. One of the best Low Rise Scissor Car Lifts on the market!
Dannmar’s DLR-6P is a portable low-rise automotive lift that helps you move along on wheels! High-density roller wheels make the DLR-6P a conveniently portable low-rise lift. The ability to have mobile automotive lifts in your shop allows you to relocate the lift with one person to other areas and use within your shop.
The BP-9X 2-post vehicle lift, floor base-plate, 9,000lbs lifting capacity, direct chain-drive, with 4 three-stage arms, 1.5" , 2.5" and 5" extension adapters included, single-point safety release, automatic arm restraints.
You haven't experienced state-of-the-art portable lifting convenience until you've used the BendPak LR-60P. This 6,000-lb. capable lift comes loaded with an electric / hydraulic power system, multi-position safety locks, rubber lifting blocks, a dropped crossbar for added clearance and a heavy-duty steel channel frame. One of the best BendPak Portable Car Lifts on the market today!
The Atlas® TD6MR is a portable mid-rise scissor lift with several different locking positions. It is a popular choice for wheel service and body shops. There is also room for some underbody work.
The Atlas® Pro-9D is the perfect choice for those customers who demand the most lifting capacity at the lowest possible price.
The Atlas® 9OHSC two post above ground lift with Super-Symmetric arms is the perfect choice for those smaller commercial repair facilities or The Mr. Homeowner who demands the highest quality at the absolute best price.
New single piece column two post floor plate vehicle lift manufactured by Auto Lift.
You haven’t experienced state-of-the-art portable lifting convenience until you’ve used the BendPak MD-6XP mid-rise scissor lift. This 6,000-lb. capable automotive lift comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters.
Great lift for a quick oil-change. Maximum lifting height of 26-1/8" without blocks and 6,600 lb. lifting capacity. One of the best Low Rise Car Lifts on the market today!
New single piece column asymmetric two post auto lift
The 407-P hobbyist four-post parking lift, 7,000lbs lifting capacity, narrow, short & low profile features, mobile with optional caster kits.
8,000 lb. capacity with 9 locking positions, one-piece diamond-plate runways and high gloss powder coat paint. Great hobbyist lift!
8,000 lb. capacity and large 3" cylinder, one-piece diamond-plate runways and scratch-resistant powder coat paint. The clearance between the column posts are about 6 inches wider than most hobbyist lifts.
Includes
Economical, high quality, clear floor and floor plate chain-over lifts with dual point lock release, steel pulleys, high strength equalization cables and double telescoping screw pads configured to accommodate the smallest Cars to the SUV's and Trucks.
The Atlas® Garage Pro 8000 is our most popular 4-post hobbyist lift. This lift is perfect for the customer with too many cars. Includes 1 Jack Tray, 4 Plastic Drip Trays, Caster Kit With Polyurethane Wheels, Two Rubber Wheel Chocks & Steel Approach Ramps.
The iDEAL LR-10K-TLPAD is a 10,000 lb. low rise, high-performance commercial, vehicle frame contact lift designed for Cars, SUVs, Vans & Trucks.
Engineered and built to offer great features at an economical price, the AL2-11KC-DX features and designs will make this the most used lift in your garage.
Single Piece Column Construction 10,000 lbs lifting capacity, dual hydraulic direct-drive cylinders designed and made on high standard high quality seals, Super-Asymmetric arms with adapters 1.5”, 2.5”, 5” as standard, Aero cable used for synchronization, single-point safety release, clear-floor design, overhead safety shut-off device automatic arms restraints (lifting height 71”)
8,000 lb. capacity extra tall lift with 11 locking positions, one-piece diamond-plate runways and high gloss powder coat paint. Great hobbyist lifts.