You are here: Home > Lift Weight > 12000 lbs
40 Items
Sort By:
Page of 1
AMGO® Hydraulics BP-12 Symmetric Floor Base-Plate 2 Post Lift 12,000 lbs Atlas® Automotive Equipment BP-12000 HD Floor Base-Plate 2 Post Lift 12,000 lbs Atlas® Automotive Equipment PV-12P Ex-Wide/Ex-Tall Symmetric 2 Post Lift 12,000 lbs
AMGO Hydraulics logo

AMGO® Hydraulics BP-12 Floor Base-Plate 2 Post Lift

The BP-12 heavy-duty 2-post lift, floor base-plate, 12,000lbs lifting capacity, direct chain-drive, with 4 three-stages arms, 1.5" , 2.5" and 5" extension adapters included, single-point safety release, automatic arm restraints.

Specifications: BP-12
  • Capacity: 12,000 lbs
  • Overall Height: 122 1/2"
  • Overall Width: 145 3/8" / 150 3/4"
  • Lift Height: 73 1/4" ~ 82 1/4"
  • Power Requirements: 2Hp 220V
Atlas logo

Atlas® BP-12000 HD Floor Base-Plate 2 Post Lift

The Atlas® BP-12000 is a commercial grade low clearance heavy duty 12,000 LB. capacity 2 post base plate above ground lift. The BP-12000 has over sized columns, symmetric three stage arms, and single point lock release.

Specifications: BP-12000
  • Capacity: 12,000 lbs
  • Overall Height w/Clylinder: 122 1/2"
  • Overall Width w/Wide Config.: 150 3/4"
  • Max Lift Height w/Adapters: 80 3/4"
  • Power Requirements: 220V +/- 5% (209-231V) / 1 Ph
Atlas logo

Atlas® PV-12P Ex-Wide/Ex-Tall 2 Post Lift

The Atlas® PV-12P is a commercial grade lift designed to accommodate long wheel base trucks. The low pad height on the PV-12P allows the operator to lift both cars and trucks. The extra distance between the columns accommodates wider vehicles or vehicles with wide rear-view mirrors. The extra height is perfect for tall vans and box trucks.

Specifications: PV-12P
  • Capacity: 12,000 lbs
  • Overall Height: 143 1/8" / 175 1/2"
  • Overall Width w/Power Unit: 158"
  • Max Lift Height w/Adapters: 82"
  • Power Requirements: 220V / 1 Ph
Auto Lift FP12K-K 12,000 lb. Four Post Cable Driven Car Lift - AL4-12K Atlas® Automotive Equipment 412 Commercial Grade 4 Post Lift 12,000 lbs Auto Lift TP12KC-D 12K lb Two Post Clear Floor Direct Drive Car Lift

Auto Lift 12K 4 Post Cable Driven Lift

Cable driven four post lift provides 12,000 lb. lifting capacity. No power beam; Cylinder stowed under single piece diamond plate track. Simple, lever release system and redundant safety locks.

Specifications: AL4-12K
  • Capacity: 12,000 lbs
  • Column Height: 84"
  • Overall Length w/Ramp: 232-1/2"
  • Overall Width (Base to Base): 123"
  • Width Between Posts: 105"
  • Lifting Height: 67-1/2"
  • Max Clearance (under track): 63-1/4"
  • Power Unit: 220V / 20 Amp / 1PH
Atlas logo

Atlas® Garage 412 Commercial Grade 4 Post Lift

The Atlas® 412 four-post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® lifts offer many exclusive features not found on some competitors lifts.

Specifications: 412
  • Capacity: 12,000 lbs
  • Height of Columns: 82"
  • Overall Width w/Motor: 135"
  • Overall Length w/Ramps: 230"
  • Clearance Between Columns: 112 1/4"
  • Lifting Height: 74"
  • Power Requirements: 220V +/- 5% (209-231volts) 1Ph
Autolift logo

Auto Lift AL-12K-CD Clear Floor 2 Post Car Lift

free truck adapter with Auto Lift 2 post lifts

A quality direct drive two post automotive lift by Auto Lift.

Specifications: AL2-12K-CD
  • Capacity: 12,000 lbs
  • Overall Height: 165"
  • overall Width: 151-1/8"
  • Max Lifting Height: 72"
  • Power Unit: 220V - 20 AMP - 1 PH
Auto Lift TP12KFX 12,000 lb. Capacity Heavy Duty Two Post Car Lift - AL2-12KFX Atlas® Platinum PVL-12 ALI Certified 2 Post Lift 12,000 lbs - AP-PVL12-3 iDeal Lift TP12KSC-DX 12K lb 2 Post Symmetric Car Lift ALI-ETL Certified
Autolift logo

Auto Lift AL2-12KFX Heavy-Duty 2 Post Lift

New A Texas style two post floor plate lift with 12,000 lb. lifting capacity, large twin 3” cylinders with low friction chain rollers, and a “big foot” base plate for extra stability.

Specifications: AL2-12KFX
  • Capacity: 12,000 lbs
  • Overall Height: 121.5"
  • Overall Width w/Power Unit: 147.8"
  • Max Lifting Height: 76.5"
  • Power Unit: 220V - 20 AMP - 1 PH
Atlas logo

Atlas® PVL-12 2 Post Lift

The Atlas Platinum PVL12 is an ALI CERTIFIED overhead 12,000 lbs two-post lift designed to accommodate both long wheel base trucks and passenger cars. The distance between the symmetrical columns is almost 123″ with a drive through space of over 108″. The extra distance between the symmetrical columns will allow the widest of vehicles to be lifted.

Specifications: PVL-12
  • Capacity: 12,000 lbs
  • Overall Height (High Setting): 177"
  • Overall Width w/Power Unit: 156 ½"
  • Max Lift Height w/Adapters: 85 ½"
  • Power Requirements: 220V / 1 Ph

ALI Certified

iDeal Lift Logo

iDeal Lift ALI HD Symmetric Clear Floor 2 Post Lift

New 12,000 lbs. ALI Certified heavy duty two post lift is a premium symmetric design clear floor vehicle lift.

Specifications: TP12KSC-DX
  • Capacity: 12,000 lbs
  • Overall Height: 168-1/2"
  • Overall Width w/Power Unit: 151-5/16"
  • Max Lifting Height: 75"
  • Power Unit: 220V - 20 AMP - 1 PH
ALI Certified
Atlas® Automotive Equipment 412A Commercial Grade 4 Post Alignment Lift 12,000 lbs Hofmann EELR738A 10K 2 Post Symmetric Car Lift Challenger Lifts E12 Heavy-Duty Symmetric 2 Post Lift 12,000 Capacity
Hofmann EELR738A 12K 2 Post Symmetric Car Lift
List Price: $6,236.00
: $4,698.70
Atlas logo

Atlas® Garage 412A Commercial Grade 4 Post Alignment Lift

The Atlas® 412A 12,000 pound capacity four post lifts are designed and built to commercial grade standards and will provide many years of service. Our Atlas® alignment lifts offer many exclusive features not found on many other competitor’s lifts. Each Atlas® 412A alignment lift includes a set of front turntables. The turntables can be set in different positions on the runway to accommodate a wide variety of wheelbases.

Specifications: 412A
  • Capacity: 12,000 lbs
  • Height of Columns: 82"
  • Overall Width w/Motor: 135"
  • Overall Length w/Ramps: 230"
  • Clearance Between Columns: 112 1/4"
  • Lifting Height: 76 1/4"
  • Power Requirements: 2 HP 220V / 1Ph
Hofmann alignment lifts

Hofmann Symmetric 2 Post Lift

Hofmann 12k 2-Post automotive/general-purpose lift is versatile.

Specifications: EELR738A
  • Capacity: 12,000 lbs
  • Overall Height Adj: 166" / 175"
  • Overall Width: 137.75"
  • Rise Height (w/Screw Pads): 78.125"
  • Power Unit: 208-230V / 1Ph / 60Hz
ALI Certified

Limited Time Offer Free Shipping Available While Supplies Last
Challenger Lift logo

Challenger E12 Heavy-Duty 2 Post Lift

The 12,000 lb. capacity E12 two post car lift provides symmetric lifting capability, maximum room to work underneath vehicles and room to grow. Heavy duty lifts provide the strength and dependability you need for larger vehicles like trucks, vans and buses.

Specifications: E12
  • Capacity: 12,000 lbs
  • Adj. Column Height: 13' 10" or 14' 7"
  • Overall Width: 11' 7 3/4"
  • Rise Height: 78 1/8"
  • Power Unit: 203/230v / 2 HP / Single Phase
ALI Certified
BendPak XPR-12CL Super-Duty 12,000 lb Capacity Two Post Car Lift BendPak XPR-12FDL Floorplate, Direct-Drive, 2 Post Car Lift 12,000 lb. BendPak XPR-12CL-LTA 2 Post Lift w/Long-Reach Triple-Telescoping Arms
BendPak XPR-12CL Super-Duty 12,000 lb 2 Post Car Lift - New Gray
List Price: $6,845.00
: $5,725.00
New Gray Color!
BendPak XPR-12CL-LTA 2 Post Lift w/Long-Reach Triple-Telescoping Arms
List Price: $7,195.00
: $6,020.00
New Gray Color!
BendPak

BendPak Triple-Telescope Arms-All Four 2 Post Lift

Bendpak 16 piece Adapter Set

When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12CL, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before.

Specifications: XPR-12CL
  • Capacity: 12,000 lbs
  • Overall Height: 170"
  • Overall Width: 155"
  • Max Lifting Height: 80" (6" Adapter)
  • Power Unit: 220VAC / 60Hz / Single Phase
ALI Certified
BendPak

BendPak 2 Post Direct-Drive Lift

Bendpak 16 piece Adapter Set

Looking for the direct-drive operation of the XPR-9FD, but with an even beefier lifting capacity? Then, the XPR-12FD is your car hoist. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 12,000 pound lifting capacity.

Specifications: XPR-12FDL
  • Capacity: 12,000 lbs
  • Overall Height: 144"
  • Overall Width: 155"
  • Max Lifting Height: 80" (w/6" Adapter)
  • Power Unit: 220VAC / 60Hz / Single Phase
ALI Certified
BendPak

BendPak XPR-12CL-LTA 2 Post Lift w/Long-Reach Triple-Telescoping Arms

If you need to service vehicles up to 12,000 lbs. capacity with extremely long wheelbases, BendPak's XPR-12CL-LTA offers nearly 72 inches of reach, compared to 58 inches on our standard triple-telescoping arms. Ideal for hard-to-reach lift points that other two-post lifts cannot access.

Specifications: XPR-12CL-LTA

  • Capacity: 12,000 lbs
  • Overall Height: 170"
  • Overall Width: 155"
  • Max Lifting Height w/Pad & 63 mm Adapter: 80"
  • Power Unit: 220 VAC / 60 Hz / 1 Ph
ALI Certified
BendPak XPR 12CL 192 BendPak XPR-12CL-LTA-192 Ex-Tall 2 Post Lift w/Long-Reach Triple-Telescoping Arms Challenger CL12 ALI Cert.Two Post Vehicle Lift w/3-stage Arms P/N CHLCL12
BendPak

BendPak Ex-Tall Triple-Telescope 2 Post Lift

Bendpak 16 piece Adapter Set

When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12CL-192, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before.

Specifications: XPR-12CL-192
  • Capacity: 12,000 lbs
  • Overall Height: 192.7"
  • Overall Width: 155"
  • Max Lifting Height (6" Adapter): 80"
  • Power Unit: 220VAC / 60Hz / Single Phase
ALI Certified
BendPak

BendPak XPR-12CL-LTA-192 Ex-Tall 2 Post Lift w/Long-Reach Triple-Telescoping Arms

If you need to service vehicles up to 12,000 lbs. capacity with extremely long wheelbases, BendPak's XPR-12CL-LTA offers nearly 72 inches of reach, compared to 58 inches on our standard triple-telescoping arms. Ideal for hard-to-reach lift points that other two-post lifts cannot access. Specifications: XPR-12CL-LTA

  • Capacity: 12,000 lbs
  • Overall Height: 192"
  • Overall Width: 155"
  • Max Lifting Height w/Pad & 63 mm Adapter: 80"
  • Power Unit: 220 VAC / 60 Hz / 1 Ph
ALI Certified
Challenger logo

Challenger CL12 2 Post Lift

The new CL12 comes standard with 3-stage front and 3-stage rear arms providing the advantage of lifting many common cars, trucks, vans and SUVs within rated capacity.

Specifications: CL12
  • Capacity: 12,000 lbs
  • Column Height : 13'8"
  • Width Overall: 11' 10"
  • Floor to Overhead Switch: 157"
  • Power Unit: 208/230V / 2 HP / Sing Phase
ALI Certified

made in USA
Challenger CL12-LC ALI Low Ceiling Symmetric 12K 2 Post Vehicle Lift w/3-stage Arms Whip Industries WFP12R Standard Length Four Post Car Lift 12,000 lb. Capacity Whip Industries WFP12R-E Extended Length Four Post Car Lift 12,000 lb. Capacity
Challenger logo

Challenger Lifts CL12-LC Low Ceiling 2 Post Lift

Need the capacity of Challengerʼs CL12 lift but donʼt have the overhead space? Weʼve designed a low-ceiling model just for you. With an overall height that fits inside a standard 12ʼ ceiling but enough capacity to lift even a heavy-duty pickup truck, the CL12-LC will expand the service potential of your facility.

Specifications: CL12-LC
  • Capacity: 12,000 lbs
  • Overall Height : 11'11"
  • Width Overall: 142"
  • Floor to Overhead Switch: 136"
  • Power Unit: 208/230V / 2 HP / Single Phase
ALI Certified
made in USA
Whip Industries logo

Whip Industries WFP12R 12K 4 Post Car Lift

Includes roller jack rail and stabilizer

Specifications: WFP12R
  • Capacity: 12,000 lbs
  • Overall Height: 100.5"
  • Overall Width: 136.25"
  • Overall Length: 216.5"
  • Width Between Columns: 166"
  • Maximum Wheelbase: 164"
  • Power Unit: 208/230v / 2 HP
Limited Time Offer
Sale Price Available thru Aug 21st!
made in USA
Whip Industries logo

Whip Industries WFP12R-E Extended 4 Post Car Lift

Includes roller jack rail and stabilizer

Specifications: WFP12R-E
  • Capacity: 12,000 lbs
  • Overall Height: 100.5"
  • Overall Width: 136.25"
  • Overall Length: 236.5"
  • Width Between Columns: 186"
  • Maximum Wheelbase: 184"
  • Power Unit: 208/230v / 2 HP
Limited Time Offer
Sale Price Available thru Aug 21st!
made in USA
Atlas® Automotive Equipment 12ASL Commercial Grade Alignment Scissor Lift 12,000 lbs Challenger Lifts CL12-DPC-QC ALI Quick Cycle Symmetric 12K 2 Post Vehicle Lift w/3-stage Arms & Dual Pendant Controls Challenger Lifts CL12-LC-DPC-QC ALI Low Ceiling Quick Cycle Symmetric 12K 2 Post Vehicle Lift w/3-stage Arms & Dual Pendant Controls
Atlas logo

Atlas® Garage 12ASL Commercial Grade Alignment Scissor Lift

The Atlas® alignment lift has a lifting height of over seven feet so that it may be floor mounted or recessed if the customer decides on a flush mount installation. The full frame under the scissor lift provides for maximum stability.

Specifications: 12ASL
  • Capacity: 12,000 lbs
  • Overall Width: 86 3/8"
  • Overall Length w/Ramps: 250"
  • Lowered Height: 11 1/2"
  • Lifting Height: 84 1/4"
  • Power Requirements: 220V +/- 5% (209-231volts) / 1Ph
Challenger logo

Challenger CL12-DPC-QC Quick Cycle 2 Post Lift

The CL12-DPC-QC offers dual pendant controls and comes standard with 3-stage front and 3-stage rear arms providing the advantage of lifting many common cars, trucks, vans and SUVs within rated capacity.

Specifications: CL12-DPC-QC
  • Capacity: 12,000 lbs
  • Column Height: 13' 8" or 13' 2"
  • Width Overall: 142"
  • Floor to Overhead Switch: 157” or 151"
  • Power Unit: 208/230V / 3 HP / Single Phase
ALI Certified

made in USA
Challenger logo

Challenger Lifts CL12-LC-DPC-QC Low Ceiling Quick Cycle™ 2 Post Lift

Need the capacity of Challengerʼs CL12 lift but donʼt have the overhead space? Weʼve designed a low-ceiling model just for you. With an overall height that fits inside a standard 12ʼ ceiling but enough capacity to lift even a heavy-duty pickup truck, the CL12-LC will expand the service potential of your facility.

Specifications: CL12-LC-DPC-QC
  • Capacity: 12,000 lbs
  • Overall Height : 11'11"
  • Width Overall: 142"
  • Floor to Overhead Switch: 136"
  • Power Unit: 208/230V / 2 HP / Single Phase
ALI Certified
made in USA
Atlas® Automotive Equipment 12AWFSL Commercial Grade Alignment Scissor Lift 12,000 lbs w/Wheels-Free System Challender EV1220 EnviroLift® Inground Car Lift 12,000 lb. Capacity Hofmann EELR728APKG 12K 4 Post Alignment Lift w/ Turntables, Rollback Paddle Kit & 2 Rolling Jacks
Atlas logo

Atlas® Garage 12AWFSL Commercial Grade Alignment Scissor Lift

The Atlas® 12AWFSL lift features a wheels free runway jack system. The wheels free runway jack system has the same style air actuated lock system as the Atlas 12ASL. When fully extended, the wheels free system elevates to over 17 inches above the runway.

Specifications: 12ASL
  • Capacity: 12,000 lbs
  • Overall Width: 86 3/8"
  • Overall Length w/Ramps: 250"
  • Lowered Height: 11 1/2"
  • Lifting Height: 84 1/4"
  • Power Requirements: 220V +/- 5% (209-231volts) / 1Ph
Challenger logo

Challenger EV1220 Inground Car Lift

The NEW EV1220 heavy-duty inground vehicle lifts are ideal for starting or expanding your commercial fleet service capabilities. Heavy-Duty Inground Vehicle Lifts require less shop space than surface mounted lifts, maximizing the number of service bays.

Specifications: EV1220
  • Capacity: 12,000 lbs
  • Overall Width: 99”
  • Rise Height: 81 1/4"
  • Drive-thru Clearance: 87"
  • Max Arm Reach: 49-1/4"
  • Min Arm Reach: 32"
  • Power Requirements: 208v-230v / 2HP
ALI Certified


Hofmann alignment lifts

Hofmann EELR728APKG 12K 4 Post Alignment Lift Package

Hofmann’s 12k Four Post Alignment Lifts provides you with 12,000 lbs of heavy-duty lifting capacity in a compact package - no need for multiple lifts.

Specifications: EELR728APKG
  • Capacity: 12,000 lbs
  • Overall Width: 134.8"
  • Overall Length: 251.5"
  • Min/Max 4 Wheel Wheelbase: 88.5" / 158.5"
  • Max 2 Wheel Wheelbase: 168.8"
  • Rasied Height: 78"
  • Lowered Height: 7.2"
  • Power Requirements: 230V / 1Ph / 60HZ
ALI Certified
Limited Time Offer Sale Price Valid thru June 26th!
Limited Time Offer Free Shipping Valid While Supplies Last
BendPak XR-12000L Quatra™ Pantograph Scissors Lift 12,000 lb. Capacity BendPak XR-12000 Quatra Car Scissor Specialty Lift 12,000 lb. Capacity Challenger 44012LR Four Post Lube Lift 12,000 Capacity
BendPak XR-12000L Quatra™ Pantograph Scissors Lift 12,000 lb - New Gray
List Price: $17,360.00
: $14,525.00
Sale Price: $12,950.00
New Gray Color!
BendPak XR-12000 Quatra Car Scissor Specialty Lift 12,000 lb - New Gray
List Price: $17,185.00
: $14,380.00
New Gray Color!
Challenger 44012LR Four Post Lube Lift - New Black Color
List Price: $25,234.15
: $17,402.85
New Black Color
BendPak

BendPak XR-12000L Quatra™ Pantograph Scissors Lift

The Quatra™ specialty lift offers 12,000 lbs. of vertical lifting power. This amazing design permits easy, unobstructed access from the front, back and sides. Its post-free structure utilizes quad-opposing scissor car lift design. There's virtually zero radial shift, so it fits well crowded spaces.

Specifications: XR-12000L
  • Capacity: 12,000 lbs
  • Overall Length:
    • Length w/Approach Ramps Extended: 276-3/4"
    • Length w/Approach Ramps Collapsed: 257-3/4"
    • Length w/Approach Ramps STowed: 225"
  • Overall Width: 88"
  • Width Between Runways: 40"
  • Max Lifting Height: 75"
  • Power Unit: 220VAC / 60Hz / Single Phase
ALI Certified

Limited Time Offer
Sale Price Valid thru June 30th!
BendPak

BendPak XR-12000 Quatra™ 12K Vertical Scissors Lift

Quatra™ series lifts by BendPak™ is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas. At the same time, the unique quad-opposing scissors design eliminates restrictive arm structures found on other scissors, giving the technician an unprecedented freedom of movement beneath the lift.

Specifications: XR-12000
  • Capacity: 12,000 lbs
  • Overall Length:
    • Length w/Approach Ramps Extended: 276-3/4"
    • Length w/Approach Ramps Collapsed: 257-3/4"
    • Length w/Approach Ramps STowed: 225"
  • Overall Width: 88"
  • Width Between Runways: 40"
  • Max Lifting Height: 75"
  • Power Unit: 220VAC / 60Hz / Single Phase
Challenger e10 Automotive Lifts

Challenger 44012LR 4 Post Vehicle Lift

New Black Color The 44012LR is the best choice for a two person oil change operation. This Lube Rack is optimized for speed and efficiency

Specifications: 44012LR
  • Capacity: 12,000 lbs
  • Overall Height: 100-1/2"
  • Overall Width: 12' 4-1/4"
  • Overall Length: 22' 6-1/4"
  • Width Between Columns: 221"
  • Rise Height: 77-3/4"
  • Power Unit: 208v - 230v /2 HP
made in USA
BendPak PL-6KDT Tandem / Independent Platforms Parking Lift 12,000-lb. Cap. Hofmann EELR709A Surface Mount & EELR724A Flush-Mount 14K  Scissor Alignment Lift Packages BendPak PL-6KDTX Ex-Wide Tandem / Independent Platforms Parking Lift 12,000-lb. Cap.
BendPak PL-6KDT 12,000-lb. Tandem / Independent Platforms Parking Lift
List Price: $20,985.00
: $17,560.00
New Gray Color
BendPak logo

BendPak PL-6KDT Tandem/Independent Platforms Parking Lift

This 6,000-lb. capacity double-wide parking lift, available in standard and extended-length models, safely converts your two-car garage into a four-car garage. No columns sit between the two parking platforms, which keeps this tandem lift’s footprint down to an admirably compact overall width.

Specifications: PL-6KDT
  • Capacity: 6,000-lb. Per Deck (12,000 lbs. total)
  • Overall Height: 123.75”
  • Overall Width: 211"
  • Overall Length: 236-1/2"
  • Width Between Posts: 185-1/2"
  • Max. Rise: 89"
  • Power Unit: 220VAC / 60Hz / Single Phase

Hofmann alignment lifts

Hofmann EELR709A Surface-Mount or EELR724A Flush-Mount 12K Scissor Alignment Lift Packages

The Hofmann 12k Scissor Alignment Lift is a rugged 12,000 lb capacity scissor alignment lift with open front design that provides easy access to alignment service and calibration areas.

Specifications: EELR709APKG - EELR724APKG
  • Capacity: 12,000 lbs
  • Overall Width: 90"
  • Overall Length: 267 3/8"
  • Service Wheelbase: 179"
  • Max Rise Height: 70"
  • Air Supply Requirements: 90 - 140 PSI @ 5 - 10 CFM
ALI Certified


Limited Time Offer EELR709APKG Sale Price Valid thru June 26th!
Limited Time Offer Free Shipping Valid While Supplies Last
BendPak logo

BendPak PL-6KDTX Ex-Wide Tandem / Independent Platforms Parking Lift

This 6,000-lb. capacity double-wide parking lift, available in standard and extended-length models, safely converts your two-car garage into a four-car garage. No columns sit between the two parking platforms, which keeps this tandem lift’s footprint down to an admirably compact width.

Specifications: PL-6KDTX
  • Capacity: 6,000-lb. Per Deck (12,000 lbs. total)
  • Overall Height: 123.75”
  • Overall Width: 250"
  • Overall Length: 236-1/2"
  • Width Between Posts: 225"
  • Max. Rise: 89"
  • Power Unit: 220VAC / 60Hz / Single Phase
BendPak XR-12000AL Quatra™ Pantograph Scissor Alignment Lift 12,000 lb - New Gray BendPak XR-12000A Quatra Extended Car Scissor Alignment Lift 12,000 lb Hofmann EELR709A Surface-mount 12K Scissor Alignment Lift & EEWA712G geoliner™ 650XD Pro42 Wheel Alignment System
BendPak XR-12000AL Quatra™ Pantograph Scissor Alignment Lift 12,000 lb - New Gray
List Price: $23,435.00
: $19,610.00
Sale Price: $17,900.00
New Gray Color!
Hofmann 650ComboS Alignment Equipment Package
List Price: $46,316.00
: $34,898.34
Sale Price: $33,681.67
BendPak logo

BendPak XR-12000AL Quatra™ Pantograph 12K Scissors Wheel Alignment Lift

The Quatra™ specialty lift offers 12,000 lbs. of vertical lifting power. This amazing design permits easy, unobstructed access from the front, back and sides. Its post-free structure utilizes quad-opposing scissor car lift design. There's virtually zero radial shift, so it fits well crowded spaces.

Specifications: XR-12000AL
  • Capacity: 12,000 lbs
  • Overall Length:
    • Length w/Ramps Extended: 300.25"
    • Length w/Ramps Collapsed: 283.25"
    • Length w/Ramps Stowed: 250"
  • Overall Width: 89.5"
  • Width Between Runways: 40.5"
  • Max Rise: 75.25"
  • Power Unit: 220VAC / 60Hz / Single Phase
ALI Certified

Limited Time Offer
Sale Price Valid thru June 30th!
BendPak logo

BendPak XR-12000A Quatra™ Pantograph 12K Scissors Wheel Alignment Lift

Quatra™ series lifts by BendPak™ is the next evolution in industrial strength lifting technology. 12,000-pounds of true vertical lifting power for a more compact footprint to better accommodate smaller service bays and work areas.

Specifications: XR-12000A
  • Capacity: 12,000 lbs
  • Overall Length:
    • Length w/Approach Ramps Extended: 296-1/2"
    • Length w/Approach Ramps Collapsed: 276-1/2"
    • Length w/Approach Ramps Stowed: 242-1/2"
  • Overall Width: 86"
  • Width Between Runways: 40"
  • Max Lifting Height: 74"
  • Power Unit: 220VAC / 60Hz / Single Phase
Hofmann 650ComboS EELR709APKG Surface-mount 12K Scissor Alignment Lift & EEWA712G geoliner™ 650XD Pro42 Wheel Alignment System
650ComboS Package Includes: Camera Mounting Fixture EAA0321J19C, 2 x Rolling Jacks EELR512A, Turntables EAK0289J06A, Rollback Kit EAK0277J28A, & Freight

Limited Time Offer Sale Price Valid thru June 26th!
Hofmann EELR709A & geoliner™ 670XD EEWA715H Hofmann EELR709A Surface-mount 12K Scissor Alignment Lift & EEWA721G geoliner™ 630 Imaging Wheel Alignment System Challenger 44012DLR Dual Four Post Lube Lift 12,000 Capacity
Hofmann 670ComboS Alignment Equipment Package
List Price: $55,684.00
: $42,136.78
Sale Price: $37,658.67
Hofmann 630ComboS Alignment Equipment Package
List Price: $50,632.00
: $38,150.31
Challenger 44012DLR Four Post Dual Lube Lift - New Black Color
List Price: $57,202.45
: $39,450.00
New Black Color
Hofmann 670ComboS EELR709APKG Surface-mount 12K Scissor Alignment Lift & EEWA715H geoliner™ 670XD Pro42 Imaging Wheel Alignment System Package
670ComboS Includes Camera Mounting Fixture EAA0321J19C, 2 x Rolling Jacks EELR512A, Turntables EAK0289J06A, Rollback Kit EAK0277J28A & Freight

Limited Time Offer Sale Price Valid thru March 27th!
Hofmann 630ComboS EELR709A Surface-mount 12K Scissor Alignment Lift & EEWA721G geoliner™ 630 Imaging Wheel Alignment System
630ComboS Package Includes: 2 x Rolling Jacks EELR512A, Turntables EAK0289J06A, Rollback Kit EAK0277J28A & Freight
Challenger e10 Automotive Lifts

Challenger 44012DLR Dual 4 Post Vehicle Lift

New Black Color Dual configuration, the 44012DLR features a staircase and catwalk, connecting two lube racks, allowing technicians to move from one bay to another for the most expedient express lube shops.

Specifications: 44012DLR
  • Capacity: 12,000 lbs
  • Overall Height: 144-1/2"
  • Overall Width: 26' 9"
  • Overall Length: 22' 3/4"
  • Width Between Columns: 221"
  • Rise Height: 77-3/4"
  • Power Unit: 208v - 230v /2 HP

made in USA
Hofmann EELR709A & geoliner™ 770XD EEWA752B
Hofmann 770ComboS Alignment Equipment Package
List Price: $60,148.00
: $45,320.31
Sale Price: $41,681.67
Hofmann 770ComboS EELR709A Surface-mount 12K Scissor Alignment Lift & EEWA715H geoliner™ 770XD Imaging Wheel Alignment System Package
770ComboS Includes 2 x Rolling Jacks EELR512A, Turntables EAK0289J06A, Rollback Kit EAK0277J28A & Freight

Limited Time Offer Sale Price Valid thru June 26th!