Need help with installation? Our AI assistant has read this installation manual and can help you find the right page and walk you through each step.
The BendPak SP-7XE is a professional-grade, full-rise surface-mount scissor lift engineered for shops that demand maximum overhead clearance, superior stability, and unobstructed undercarriage access. With a 7,000-lb. lifting capacity and an impressive 70.5" maximum rise, this lift is built for full-service automotive shops, quick-lube operations, and high-volume facilities that need reliable performance in a compact footprint. The open-center design eliminates the need for a cross member, giving technicians complete access to critical service areas without awkward maneuvering. Featuring pneumatic safety locks, dual hydraulic cylinders, and a low-profile 6.5" collapsed height, the SP-7XE delivers the power, precision, and durability that BendPak is known for.
The SP-7XE is designed to give you the vertical workspace you need without sacrificing floor accessibility. This surface-mount scissor lift installs directly on your garage floor with no cross member, creating a true open-center work area. Reinforced steel construction at the base and along the top of the runways provides exceptional stability and eliminates the need for additional structural support.
Whether you're performing oil changes, brake work, exhaust repairs, or full undercarriage inspections, the SP-7XE gives technicians unobstructed access to every critical area. No more awkward stooping or crawling across support beams—just clear, comfortable access to the entire underside of the vehicle.
Large Base Frame: The SP-7XE features a heavy-duty boxed-steel formed base frame that increases overall stability and reduces stress on the lift structure. The elongated base provides a solid, balanced foundation that ensures a smooth, perfectly level rise every time you operate the lift.
Dual Master Hydraulic Cylinders: This lift is powered by two redesigned, extra-large hydraulic cylinders—one for each platform—ensuring a perfectly balanced rise with every cycle. Both cylinders feature integrated flow restrictors that control descent speed, even in the extremely rare event of a hydraulic fluid leak or hose rupture. This dual-cylinder design delivers consistent, reliable performance under heavy loads.
Electric/Hydraulic Power System: The SP-7XE incorporates a maintenance-free electric hydraulic power system for ultimate dependability. All controls are ergonomically positioned within close reach, making operation safe and intuitive. The lift raises to full height in just 45 seconds, maximizing shop efficiency without compromising safety.
Pneumatic Safety Locks: The SP-7XE is equipped with advanced pneumatic safety locks that disengage from a convenient, centralized operator stand. You can release the locks from a safe distance without manually lifting release arms or latches. The locks automatically engage and disengage at eight distinct locking positions, giving you precise height control for a wide range of service tasks. From 24.75" at the first lock all the way up to 70" at the eighth position, you have the flexibility to work at the exact height you need.
Hardened Pivot Pins with Zerk Fittings: Every pivot point on the lift features hardened steel pins with integrated Zerk grease fittings. These fittings make lubrication fast and straightforward, ensuring smooth, quiet operation and preventing premature wear. Simple weekly and monthly maintenance keeps your lift running like new for years to come.
Durable Cushioned Rubber Contact Blocks: Four robust rubber contact blocks come standard with every SP-7XE purchase. These blocks are designed to engage the vehicle frame securely, with a thick, textured surface that prevents slipping when properly positioned. Unlike flimsy aftermarket pads, BendPak's contact blocks are engineered to stand up to heavy daily use.
Every SP-7XE includes a comprehensive owner's manual with complete installation instructions, detailed diagrams, and maintenance schedules. Safety and caution decals are included with every purchase to ensure compliance and safe operation. BendPak stands behind this lift with industry-leading support and documentation, so you can install and maintain your equipment with confidence.
If your facility has a recessed concrete area designed for flush-mount installations, consider the SP-7XLF flush-mount version of this lift. When collapsed, the flush-mount model sits virtually level with your shop floor, allowing you to drive over it and work around it without obstruction. It's the ultimate "invisible" lift solution for shops that want maximum floor space flexibility.
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs
above for complete specs, dimensions, and detailed feature breakdowns.
LOW-RISE/MID-RISE LIFTS WARRANTY
Duration: From the date of purchase by the original Purchaser or 12-24 months from the date of shipment by BendPak or whichever comes first.
Limited Warranty
1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any BendPak Full-Rise Scissor Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by overloading lift beyond rated capacity
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber pads, pad adapters, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote
addresses.
**For all BendPak brand Low-Rise and Mid-Rise Surface Mounted Vehicle Service Lifts (excluding specialty lifts, high rise, commercial
parking, material handling, or models for particular purpose) manufactured on or following 7/27/2012.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered
damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other
than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger
under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on
www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
BendPak
AMGO Hydraulics
Atlas Automotive Equipment
BendPak
BendPak
US Dollars