|
|
|
|
|
|
|
|
|
|
|
Katool Symmetric 2 Post Car Lift
Specifications: KT-H100
- Capacity: 10,000 lbs
- Overall Height: 110.25"
- Overall Width: 142.25"
- Max Lift Height: 70.75"
- Drive thru Clearance: 94.5"
- Power Unit: 220V - 60HZ - 1 PH
|
Katool Symmetric 2 Post Car Lift
Specifications: KT-H105
- Capacity: 10,000 lbs
- Overall Height: 110.25"
- Overall Width: 142.25"
- Max Lift Height: 70.75"
- Drive thru Clearance: 94.5"
- Power Unit: 220V - 60HZ - 1 PH
|
AMGO® Hydraulics LR10 Low-Rise Portable Lift
Low-rise portable scissors lift with power unit stand. 10,000lbs lifting capacity with mechanical safety lock release.
Specifications: LR10
- Capacity: 10,000 lbs
- Overall Width: 70"
- Overall Length: 53 1/4"
- Lifting Height: 23-5/8"
- Min Height: 4 1/8"
- Power Requirements: 1.0HP / 110V/60Hz / 1 Ph
Limited Time Offer Call for Special Pricing
|
|
|
|
|
|
|
|
|
|
|
|
|
AMGO® Hydraulics OHS-10 Super-Asymmetric® 2 Post Lift
Single Piece Column Construction 10,000 lbs lifting capacity, dual hydraulic direct-drive cylinders designed and made on high standard high quality seals, Super-Asymmetric arms with adapters 1.5”, 2.5”, 5” as standard, Aero cable used for synchronization, single-point safety release, clear-floor design, overhead safety shut-off device automatic arms restraints (lifting height 71”)
Specifications: OHX-10
- Capacity: 10,000 lbs
- Overall Height: 144"
- Overall Width: 135″
- Lift Height: 71 1/2"~ 80 1/2"
- Power Requirements: 2Hp / 220V/60Hz / 1 Ph
Limited Time Offer Call for Special Pricing
|
AMGO® Hydraulics BP-10 Floor Base-Plate 2 Post Lift
The BP-10 2-post lift, floor base-plate, 10,000lbs lifting capacity, Super-symmetric arms, direct chain-drive, with three-stage front arms and two-stage rear arms, 1.5" , 2.5" and 5" extension adapters included, single-point safety release, automatic arm restraints.
Specifications: BP-10
- Capacity: 10,000 lbs
- Overall Height: 111 7/8"
- Overall Width: 111 7/8"
- Lift Height: 76 3/8″ ~ 85 3/8″
- Power Requirements: 2Hp 220v
Limited Time Offer Call for Special Pricing
|
AMGO® Hydraulics OH-10 Super-Asymmetric® 2 Post Lift
The OH-10 2-post lift, clear-floor, 10,000lbs lifting capacity, direct chain-drive, with Super-Asymmetric® arms ,1.5", 2.5" and 5" extension adapters included, single-point safety release, overhead safety shut-off device, automatic arm restraints.
Specifications: OH-10
- Capacity: 10,000 lbs
- Overall Height: 142 1/2" /150"
- Overall Width: 135 7/8"
- Lift Height: 71 1/2"~ 80 1/2"
- Power Requirements: 2Hp / 220V/60Hz / 1 Ph
Limited Time Offer Call for Special Pricing
|
|
|
|
|
|
|
|
|
|
|
|
|
AMGO® Hydraulics OHS-10H Ex-Tall Super-Asymmetric® 2 Post Lift
Extremely high lifting, two section columns 10,000 lbs lifting Capacity, dual hydraulic direct-drived cylinders designed and made on high standard high quality seals, Super-Asymmetric arms with adapters 1.5”, 2.5”, 5”as standard, Aero cable used for synchronization, Single-point safety release, Clearfloor design, Overhead safety shut-off device Automatic arms restraints (lifting hight 78")
Specifications: OHX-10
- Capacity: 10,000 lbs
- Overall Height: 157" ~ 168"
- Overall Width: 135″
- Lift Height: 78 1/2" ~ 87 1/2"
- Power Requirements: 2Hp / 220V/60Hz / 1 Ph
Limited Time Offer Call for Special Pricing
|
Atlas® BP-10000 Floor Base-Plate 2 Post Lift
The Atlas® BP-10000 commercial grade 2-post base plate lift is built for those customers who want to lift heavy vehicles in a low ceiling garage.
Specifications: BP-10000
- Capacity: 10,000 lbs
- Overall Height: 111 7/8"
- Overall Floor Width: 139 1/8"
- Max Lift Height w/Adapters: 86 3/8"
- Power Requirements: 220V / 1 Ph
Limited Time Offer Call for Special Pricing
|
iDeal Lift TP10KAC-DX Clear Floor Bi-Symmetric
10,000 lbs. ALI Certified heavy duty two post lift is a premium Bi-Symmetric design clear floor vehicle lift.
Specifications: TP10KAC-DX
- Capacity: 10,000 lbs
- Overall Height: 144"
- overall Width w/Power Unit: 145 1/2"
- Max Lifting Height w/Tallest Adapter: 76-1/2"
- Power Unit: 220V - 20 AMP - 1 PH
|
|
|
|
|
|
|
|
|
|
|
|
|
Atlas® PV-10P Direct Drive Cylinder Symmetric/Asymmetric 2 Post Lift
The Atlas® PV10P is a commercial grade two-post lift designed to lift a wide variety of vehicles. The PV10P has a low pad height to accommodate passenger vehicles but is built to handle full size pickups. The PV10P has dual direct drive cylinders and single-point lock release.
Specifications: PV-10P
- Capacity: 10,000 lbs
- Overall Height: 143 1/8" / 147"
- Overall Width w/Power Unit: 137 1/2"
- Max Lift Height: 82"
- Power Requirements: 220V +/- 5% (209-231volts) / 1 Ph
Limited Time Offer Call for Special Pricing
|
Atlas® OH-10X Ex-Tall/Ex-Wide 2 Post Lift
The Atlas® OH-10X is WIDER and TALLER than most two-post lift. This commercial grade symmetric two-post lift is the perfect choice for garages that demand the highest quality at the absolute best price.
Specifications: OH-10X
- Capacity: 10,000 lbs
- Overall Height: 152"
- Overall Floor Width: 144 3/8"
- Max Lift Height w/Adapters: 85 3/4"
- Power Requirements: 220V / 1 Ph
|
BendPak LR10000 Low-Rise ALI Lift
BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety of vehicles will fit.
Specifications: LR-10000
- Capacity: 10,000 lbs
- Overall Length: 82.65"
- Overall Width: 85"
- Lifting Height w/Blocks: 32"
- Lowered Height: 4"
- Power Requirements: 110 VAC / 50/60 Hz / 1 Ph
|
|
|
|
|
|
|
|
|
|
|
|
|
Launch TLT210-XT Asymmetric 2 Post Lift
Multi Purpose full asymmetric lift that is height and width adjustable and may be installed in a standard or rotated column configuration to accommodate
the smallest Cars to the largest SUVs’ and Trucks.
Specifications: TLT210-XT
- Capacity: 10,000 lbs
- Minimum Column Height: 143"
- Total Width:
- 136.6" (Standard)
- 137.9" (Rotated)"
- Max Lifting Height: 76.4"
- Power Unit: 208-230 Volt/60hz./Single Phase
|
Dannmar D2-10C Symmetric Clearfloor 2 Post Lift
The Dannmar D2-10C two-post lift is a great choice in direct-drive lifting technology. Dannmar’s high-quality car lift utilizes the best components with the proven design to offer you a 10,000 lb. capacity lift.
Specifications: D2-10C
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width: 145.25"
- Max Lifting Height (Top Lock): 78.5"
- Power Unit: 220VAC / 60Hz / Single Phase
Limited Time Offer Sale Price Available While Supplies Last
|
Dannmar D2-10A Asymmetric Clearfloor 2 Post Lift
The D2-10A is an asymmetric clearfloor two-post lift that features a 10,000 lb. lifting capacity and accommodates full-size trucks, vans, and standard passenger cars. Single-piece column construction, tubular steel lifting carriage, and direct-drive hydraulic cylinders ensure the best possible performance and reliability. Rotated asymmetric columns allow vehicles to be loaded with doors clear of the columns for convenient entry and exit of vehicles.
Specifications: D2-10A
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width: 143.5"
- Max Lifting Height (Top Lock): 78.5"
- Power Unit: 220VAC / 60Hz / Single Phase
Limited Time Offer Sale Price Available While Supplies Last
|
|
|
|
|
|
|
|
|
|
|
|
|
Atlas® PVL-10 ALI Adj Height 2 Post Lift
The ALI CERTIFIED Atlas Platinum PVL10 was engineered and built to offer a commercial grade above ground lift to those customers who have “fallen in love” with the reliability offered by the Double S column design and symmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired.
Specifications: PVL-10
- Capacity: 10,000 lbs
- Overall Height w/Cylinder: 148"
- Overall Width: 139" Asymmetrical / 137 1/2" Symmetrical
- Max Lift Height w/Adapters: 81 1/2"
- Power Requirements: 220V / 1 Ph
Limited Time Offer Call for Special Pricing
|
BendPak XPR-10S Hydraulic Lift
This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.
Specifications: XPR-10S
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lifting Height (Pad Only): 73" - 75"
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak XPR-10AS Asymmetric Dual-Width 2 Post Lift
The BendPak XPR-10AS offers exceptional direct-drive lifting performance with an important added benefit. We rotated both posts inward to give you the ability to open a vehicle's doors while it's still raised, all without sacrificing drive-thru clearance. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.
Specifications: XPR-10AS
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width:
- 137" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lifting Height (Pad Only): 73" - 75"
- Power Unit: 220VAC / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak XPR-10S-LP Low-Pro™ Arms Hydraulic Lift
This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.
Specifications: XPR-10S
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lifting Height (Pad Only): 73" - 75"
- Power Unit: 220VAC / 60Hz / Single Phase
|
Challenger VLE10 Versymmetric® 2-Post Auto Lift
Challenger adds the industry leading Versymmetric® Technology to the popular economy grade 10,000 lb 2-post lift, the LE10.
Specifications: VLE10
- Capacity: 10,000 lbs
- Overall Height: 143.875”
- Overall Width: 131.625"
- Rise Height (Screw Pads at Highest Position): 74.75"
- Power Unit: 208v - 230v /2 HP 60Hz./ 1Ph
|
Challenger SA10 Two-Post Auto Lift
Challenger Lifts' SA10 features the ability to be configured in either the symmetric or asymmetric position dependent upon the service requirements of your shop.
Specifications: SA10
- Capacity: 10,000 lbs
- Overall Height: 136.5”
- Overall Height (Cylinder Extended): 142.5"
- Overall Width:
- Symmetric: 129” / 135”
- Asymmetric: 131.5” / 137.5”
- Rise Height): 74.5"
- Power Unit: 208v - 230v /2 HP 60Hz./ 1Ph
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak 10AP Symmetric 2 Post Car Lift
BendPak’s all-new AP series of two-post lifts are a revolutionary design that factors the best qualities of today’s two-post lift types into a completely new concept in car lift engineering.
Specifications: 10AP
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width: 139" or 147"
- Max Lifting Height: 80.5”
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak XPR-10XLS Symmetric Adj-Width Ex-Tall 2 Post Lift
Tall techs no longer have to strain themselves while they work. The XPR-10XLS is a high-reach symmetrical two-post lift that can be customized with an optional extension kit and/or Low-Pro™ arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.
Specifications: XPR-10XLS
- Capacity: 10,000 lbs
- Overall Height: 157"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lift Height: 75" - 82.5" (w/Pad + 63 mm Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak XPR-10S-168 Extra Tall Dual-Width Lift
The safe and rugged XPR-10S-168 two-post lift features extended height columns for added overhead clearance and an adjustable top beam to accommodate wide or narrow installation set-ups. The adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements.
Specifications: XPR-10S-168
- Capacity: 10,000 lbs
- Overall Height: 168"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lifting Height (Pad Only): 73"
- Power Unit: 220VAC / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak XPR-10AXLS-LP Asymmetric Adj-Width Ex-Tall 2 Post Lift
Because taller mechanics are sometimes at a disadvantage while they work, we’re making it easier to wrench under a fully raised vehicle. The XPR-10AXLS model adds 6” of lift and extends the overall height by 6”. This may seem like a small change, but taller people know that the difference between stooping and standing under a two-post lift can be the difference between severe back/neck pain and working in total comfort.
Specifications: XPR-10AXLS-LP
- Capacity: 10,000 lbs
- Overall Height: 157"
- Overall Width:
- 137" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lift Height: 82.25"
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak XPR-10AS-168 Extra Tall Dual-Width Lift
The powerful and secure XPR-10AS-168 is an incredibly rapid two-post lift with a robust menu of features to increase efficiency and productivity. Extended height columns provide added overhead clearance and an adjustable width design allows you to choose the best setting for your specific space or vehicle lifting requirements. This true asymmetric lift features 30° rotated columns for added door-opening clearance and interior car access. The exclusive Tru-Metric carriage and arm design combines to give users the ability to load vehicles either symmetrically (centerline of vehicle at column) or asymmetrically (centerline of vehicle behind column).
Specifications: XPR-10AS-168
- Capacity: 10,000 lbs
- Overall Height: 168"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lifting Height (Pad Only): 73"
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak 10APX Symmetric 2 Post Car Lift
BendPak’s all-new AP series of two-post lifts are a revolutionary design that factors the best qualities of today’s two-post lift types into a completely new concept in car lift engineering.
Specifications: 10APX
- Capacity: 10,000 lbs
- Overall Height: 157"
- Overall Width: 139” or 147”
- Max Lifting Height: 86.5”
- Power Unit: 220VAC / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
Challenger SRM10 Short Rise Car Lift
The SRM10 is a great choice for brake and tire servicing needs. Dual hydraulic cylinders provide a 10,000 lb. lifting capacity picking up vehicles ranging from small passenger cars to light trucks.
Specifications: SRM10
- Capacity: 10,000 lbs
- Overall Width: 85”
- Overall Length: 92 7/8"
- Rise Height: 22"
- Power Requirements: 115v / 60Hz, 1Ph
|
BendPak 10AP-168 Symmetric Ex-Tall 2 Post Car Lift
BendPak’s all-new AP series of two-post lifts are a revolutionary design that factors the best qualities of today’s two-post lift types into a completely new concept in car lift engineering.
Specifications: 10AP-168
- Capacity: 10,000 lbs
- Overall Height: 168"
- Overall Width: 139" or 147"
- Max Lifting Height: 80.5”
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak XPR-10XLS-181 Symmetric Adj-Width Ex-Tall 2 Post Lift
Tall techs no longer have to strain themselves while they work. The XPR-10XLS is a high-reach symmetrical two-post lift that can be customized with an optional extension kit and/or Low-Pro™ arms. Perfect for vehicles of all sizes. A must-have tool to help taller techs stand upright while they work.
Specifications: XPR-10XLS-181
- Capacity: 10,000 lbs
- Overall Height: 180.75"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lift Height: 84.5" (w/Pad)
- Power Unit: 220VAC / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak XPR-10AXLS-181 Asymmetric Adj-Width Ex-Tall 2 Post Lift
Because taller mechanics are sometimes at a disadvantage while they work, we’re making it easier to wrench under a fully raised vehicle. The XPR-10AXLS model adds 6” of lift and extends the overall height by 6”. This may seem like a small change, but taller people know that the difference between stooping and standing under a two-post lift can be the difference between severe back/neck pain and working in total comfort.
Specifications: XPR-10AXLS-181
- Capacity: 10,000 lbs
- Overall Height: 180"
- Overall Width:
- 137" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lift Height: 84.25"(w/Pad)
- Power Unit: 220VAC / 60Hz / Single Phase
|
Challenger CL10V3 Series Versymmetric® 2 Post Lift
With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.
Specifications: CL10V3 Series
- Capacity: 10,000 lbs
- Column Height: 11'8", 13'8", or 14'8"
- Adj Width Overall: 11' 6-1/2" / 11' 11"
- Rise Height: 74-1/8"
- Power Unit: 208/230v / 2 HP / Single Phase
|
Rotary Lift True Asymmetric Two Post Lift
True asymmetric, with columns at rotated 30°. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column.
Specifications: SPOA10
- Capacity: 10,000 lbs
- Overall Height: 11' 8-1/2"
- Overall Width Overall: 11' 5 3/8"
- Rise Height: 78-1/4"
- Power Unit: 203/230v / 2 HP /
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak XPR-10S Hydraulic Lift & Turf Kit
This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. The BendPak Turf Maintenance Lift Accessory Kit is the most versatile utility vehicle and lawn maintenance two-post lift turf kit in existence.
Specifications: XPR-10S
- Capacity: 10,000 lbs
- Overall Height: 145"
- Overall Width:
- 132" (NARROW CONFIG)
- 145" (WIDE CONFIG)
- Max Lifting Height (Pad Only): 73" - 75"
- Power Unit: 220VAC / 60Hz / Single Phase
|
Challenger QC Series Quick Cycle 2-Post Lift
Challenger’s Quick Cycle is a simple way to increase the rise and descent speed of your Challenger Lifts. Larger
motor (from 2hp to 3hp) and a bigger pump (from 2.5cc to 4.0cc). These components increase the speed of rise from 48 seconds to 27 seconds, equating to a 42% time savings.
Specifications: CL10V3-QC Series
- Capacity: 10,000 lbs
- Column Height : 11'8", 13'8", or 14'8"
- Adj Width Overall: 11' 6-1/2" / 11' 11"
- Rise Height: 74-1/8"
- Power Unit: 208/230v / 3 HP / Single Phase
|
Challenger Versymmetric® 2 Post Lift w/Dual Pendant Power Controls
The CL10V3-DPC Series offers dual pendantpower controls. With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.
Specifications: CL10V3-DPC Series
- Capacity: 10,000 lbs
- Column Height: 11'8", 13'8", or 14'8"
- Adj Width Overall: 11' 6-1/2" / 11' 11"
- Rise Height: 74-1/8"
- Power Unit: 203/230v / 2 HP / Single Phase
|
|
|
|
|
|
|
|
|
|
|
Challenger Versymmetric® 2 Post Lift w/Dual Pendant Power Controls & Quick Cycle
The CL10V3-DPS Series offers dual pendant power controls. With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities. Challenger’s Quick Cycle is a simple way to increase the rise and descent speed of your lifts.
Specifications: CL10V3-DPC-QC Series
- Capacity: 10,000 lbs
- Column Height: 11'8", 13'8", or 14'8"
- Adj Width Overall: 11' 6-1/2" / 11' 11"
- Rise Height: 74-1/8"
- Power Unit: 203/230v / 2 HP / Single Phase
|
Challenger EV1020 Inground Car Lift
Inground car lifts with superior arm sweep, the widest drive-thru in the industry plus more service bays (smaller footprint than surface car lifts) means even more revenue.
Specifications: EV1020
- Capacity: 10,000 lbs
- Overall Width: 110”
- Rise Height: 74"
- Drive-thru Clearance: 87"
- Rise Height: 52-13/16"
- Max Arm Reach: 42-1/8"
- Min Arm Reach: 19-5/8"
- Power Requirements: 208v-230v / 2HP
|
|