Challenger CL20 Series ALI Two Post Vehicle Lift 20,000

Description

Technical Specifications

Warranty

Challenger CL20 Series Heavy-Duty ALI Two Post Vehicle Lift 20,000 Capacity

To view the lift inspection guide Click Here.

Challenger’s Heavy-Duty 2-Post lifts boast optimum flexibility with a lift designed from the anchors up to meet ALI/ANSI safety standards. These lifts have a capacity of 16,000lbs or 20,000lbs and can lift everything from compact cars to tall, heavy trucks. All put together, this lift is built to withstand the toughest of fleet maintenance.

Innovative synchronizer cable system easily adjusts to any of the three lift height options without extra parts or making the cable connection inaccessible.

Model Number	CL16-0-3S	CL16-2-3S	CL20-0	CL20-2
Description	16K Standard	16K Extended Height	20K Standard	20K Extended Height
Lift Capacity*	16,000 lbs.		20,000 lbs.
Lifting Configuration	Symmetric
Lifting Configuration	Symmetric
Arms	3-Stage Front/Rear		2-Stage Front/Rear
Max Load Per Arm ¹	4,000 lbs.		5,000 lbs.
A Overall Height Options	162” / 168” / 174”	186” / 192” / 198”	162” / 168” / 174”	186” / 192” / 198”
B Floor to Overhead Switch	155” / 161” / 167”	179” / 185” / 191”	155” / 161” / 167”	179” / 185” / 191”
C Rise Height / Max. w/Adapters	Min. 75.5” / Max. 81.5”		Min. 76.6” / Max. 84.6”
D Screw Pad Height	Min. 4.75” / Max. 6.5”		Min. 6.2” / Max. 7.6”
Stack Adapter Height	3” & 6”		4” & 8”
E Overall Width Options (Standard / -6” / -12”)	166.75” / 160.75” / 154.75”
F Between Columns	132” / 126” / 120”
To Nearest Obstruction (Standard / -6” / -12”)	7'6” / 7'3” / 7'
Drive-Thru Clearance	116.25” / 110.25” / 104.25”
Arm Reach	Min. 36.625” / Max. 75”		Min. 38.5” / Max. 62”
Motor / Voltage ²	3HP , 1Ph , 60Hz , 208/230v
Air Supply Required	90-120 psi
Time to Rise ³	62 Seconds
Min Ceiling Height Required	13' 8” / 16' 2” / 16' 8”	15' 8” / 14' 2” / 14' 8”	13' 8” / 16' 2” / 16' 8”	15' 8” / 14' 2” / 14' 8”

¹Lift capacity ratings are based on loads equally distributed on all four arms
²Optional 3 phase electrical also available. Specify at time of order.
³Lifting and lowering speeds may vary depending on the weight of the vehicle

Standard lift colors are Red, Blue & Black.

Click on Image to Download or Enlarge It

To View or Download the CL20 Service Bay Layout Click Here

LIMITED WARRANTY

Challenger Lifts, Inc. (CLI) lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s specifications set forth in CLI’s installation, operation, and maintenance instructions. Use of any unapproved parts or accessories will void your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product has been registered with Challenger Lifts, Inc., www.challengerlifts.com.

This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation, abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when repairs have been attempted or made by anyone other than a CLI authorized service representative.

This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is authorized to give any warranties of any nature on behalf of CLI.

The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky, and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.

Functional parts are considered the power units, cylinders, sheaves, sheave pins, hoses, hydraulic & pneumatic fittings, cables, adapters, latches, valves, and controls.

Structural parts are considered the carriage, columns, column extensions, overhead beams, arms, cross beams, runways, wheel stops, ramps, bolsters, sync rails, and plungers.

Note: Warranty registration must be completed online at https://www.challengerlifts.com/register-your-lift/ or warranty period will beging from invoice date of lift purchase.

Click on Image to Enlarge or Download

Features

Engineered to be wider, taller, and stronger. Ready to tackle the heaviest vehicles in any fleet.
Installation is available in 1 of 3 height and width variations, making this one of Challenger's most versatile lifts.
Single-point air actuated lock release allows the technician to disengage both columns simultaneously.
Oversized 5” diameter steel pulley and heavy-duty 3/8” cable reduces stress on equalization system and increases cable life.
60” lifting carriage design increases lift life.
Adjustable width and symmetrical design allow easy access to the vehicle’s interior.
Dual integrated rubber door guards to prevent door damage.
Heavy-Duty rubber screw pads accommodate a wide range of recommended vehicle lifting points

Includes