In BusinessSince 1987
AZ, CA, DE, FL, GA, IA, IN, MA, MD, MI, MO, NC, ND, NE, NJ, NY, OH, PA, TX, WI
The Atlas® Apex 8 is an ALI CERTIFIED four post hobbyist lift designed and built for use by Mr. Homeowner or restoration shop. Includes 1 Jack Tray, 4 Plastic Drip Trays, Caster Kit With Polyurethane Wheels, Two Rubber Wheel Chocks & Steel Approach Ramps.
10,000 lbs. ALI Certified heavy duty two post lift is a premium Bi-Symmetric design clear floor vehicle lift.
The Atlas® 9KBP is a base-plate two-post lift designed for low ceiling garages. The total column height of 111 ½” (9 feet 3 ½ inches) allows this lift to be installed in almost any professional or home garage with a ceiling as low as 9 feet 6 inches.
BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety of vehicles will fit.
The Atlas® Apex 9 is an ALI CERTIFIED four post hobbyist lift designed and built for use by Mr. Homeowner or restoration shop. Includes 1 Jack Tray, 4 Plastic Drip Trays, Caster Kit With Polyurethane Wheels, Wheel Chocks & Approach Ramps.
Multi Purpose full asymmetric lift that is height and width adjustable and may be installed in a standard or rotated column configuration to accommodate the smallest Cars to the largest SUVs’ and Trucks.
The ALI CERTIFIED Atlas Platinum PVL10 was engineered and built to offer a commercial grade above ground lift to those customers who have “fallen in love” with the reliability offered by the Double S column design and symmetric columns. Tens of thousands of above ground lifts incorporating the Double S column design have been sold worldwide over the past two decades. The Double S column design was so revolutionary, that it was protected by a patent. That patent has now expired.
The BendPak HD-9ST space-saver four post lift is a rugged, standard-height, space-saver solution with a 9,000-lb. lifting capacity. Perfect for vehicle storage and service -at the shop or in the garage.
The GP-7LCS is a truly one-of-a-kind design. Because it fits in garages with ceilings as low as 9', it boasts the lowest columns ever found on a permanent two-post lift. It can be installed in virtually every garage on the planet and still offers an impressive 58" rise.
The SRM10 is a great choice for brake and tire servicing needs. Dual hydraulic cylinders provide a 10,000 lb. lifting capacity picking up vehicles ranging from small passenger cars to light trucks.
The HD-9 is your rugged, 9,000-lb. lifting solution. Perfect for vehicle storage and service-at the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you.
The GP-7LC is a shortened version of the standard GP-7, accommodating ceilings as low as 10' while offering an impressive 68" max rise. This model is truly designed for homeowners who until now could never fit a two-post lift in their garage.
Shorter length and extra height, the HD-7P is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space.
The Dannmar D2-10C two-post lift is a great choice in direct-drive lifting technology. Dannmar’s high-quality car lift utilizes the best components with the proven design to offer you a 10,000 lb. capacity lift.
Challenger adds the industry leading Versymmetric® Technology to the popular economy grade 10,000 lb 2-post lift, the LE10.
The D2-10A is an asymmetric clearfloor two-post lift that features a 10,000 lb. lifting capacity and accommodates full-size trucks, vans, and standard passenger cars. Single-piece column construction, tubular steel lifting carriage, and direct-drive hydraulic cylinders ensure the best possible performance and reliability. Rotated asymmetric columns allow vehicles to be loaded with doors clear of the columns for convenient entry and exit of vehicles.
The HD-9XL is your 9,000-lb. rugged lifting solution if you need lift a car or truck with a wider and / or longer wheel base. Perfect for vehicle storage and service - at the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you. This model is available with optional casters, dip-trays, jack platform and more.
The HD-9STX is your 9,000-lb. rugged lifting solution if you need get something heavy up high, but you don't have a lot of space on the ground to lift it with. Perfect for vehicle storage and service at the shop or in the garage.
Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.
Challenger Lifts' SA10 features the ability to be configured in either the symmetric or asymmetric position dependent upon the service requirements of your shop.
The HD-9XW is your 9,000-lb. rugged lifting solution if you need get something heavy up high, but you don't have an entire garage to dedicate to the lift. Perfect for vehicle storage and service-at the shop or in the garage.
Our standard-height GP-7 is fit for garages with 13' ceilings and offers a full 78" max rise. These dimensions are similar to other two-post lifts, but the GP-7 offers a much slimmer profile than other lifts. This makes it ideal for narrow garages looking to fit more lifts in limited space.
The 10AP two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting
The TLT211-AS is heavy-duty lift that is perfect for lifting the smallest economy cars to the largest SUV's and front-end heavy diesel pickups.
ATTD-APEX8-Combo Includes: Atlas® Garage Apex 8 ALI Certified 4 Post Parking Lift & Set of 2 RJ-35 Sliding Hydraulic Center Jack 3500 lbs & Truck Adapter
Challenger’s Home Storage/DIY light duty general service lifts are commercial-grade, yet economical for DIY enthusiasts. Features 115v or 120v electric/single hydraulic cylinder w/ cable system for simple plug in and lift capability. Can be free standing for mobility or bolted to the floor for even more stability.
The P-9000LTF is one of the industry's highest-capacity low-rise scissor lifts. It offers a flush-mounted and open-center design, so you can lift heavy-duty equipment without taking up an inch of vertical space in your shop when the lift is not in use.
Expand your service capabilities with a 9,000-lb. capacity pit-style, open-center, low-rise lift. With a dual-approach design, and an electric-hydraulic power system with a hands-free safety system, BendPak pit-style lifts represent optimum convenience and versatility for any garage or lube shop.
The next generation of two-post lifts - now with an increased height! The 10AP Series is built with the future in mind, and has all the features you'll need to service vehicles as effectively as possible. This revolutionary lift can handle Electric Vehicles effortlessly and can adapt to both symmetrical and asymmetrical configurations.
New 12,000 lbs. ALI Certified heavy duty two post lift is a premium symmetric design clear floor vehicle lift.
With nearly 45" of rise from the flush-mounted position, the MDS-6LPF is a world-class performer in the mid-rise lift class. There's no better way to get this much power and height from a fully collapsed, zero-footprint design.
This fully open-center design, both top and bottom, makes the MDS-6K a clear leader in convenience and work productivity.
The Atlas Platinum PVL14 is a four (4) post commercial grade, heavy-duty lift designed with the professional shop in mind. This lift can accommodate a variety of cars, vans, SUVs, trucks, and even some light & medium duty commercial vehicles.
The Atlas Platinum PVL12 is an ALI CERTIFIED overhead 12,000 lbs two-post lift designed to accommodate both long wheel base trucks and passenger cars. The distance between the symmetrical columns is almost 123″ with a drive through space of over 108″. The extra distance between the symmetrical columns will allow the widest of vehicles to be lifted.
With three Versymmetric® 2 post lifts productivity configurations - Max Plus Productivity, Maximum Productivity and Complete Productivity, adjustable height and width options, and custom color options, CL10series two post car lifts are the best choice for professional service facilities.
Dannmar’s D4-9 four-post lift delivers versatile productivity while allowing you to easily store project cars, classics, daily drivers, or even heavy pickup trucks. Dannmar’s D4-9 also comes standard with the accessories that most other car lift companies charge extra for. Mobile caster kits, drip trays, aluminum ramps, and more are all included. But a BIG plus of this four-post lift series is that you can store a vehicle raised above; and while having an open working space below. Dannmar’s D4-9 serves double-duty.
All-Symmetric Arms, Direct Push, Clear Floor & Includes Quick Change Height Adapters
Symmetric, Direct Push, Clear Floor & Includes Quick Change Height Adapters
BendPak's "HDS-Series" four-post lifts are a whole new breed of rugged. They're newly engineered car and truck lifts that work better, are built to last, and feature upgrades that increase safety, durability and productivity.
Asymmetric, Direct Push, Clear Floor & Includes Quick Change Height Adapters
Dannmar’s D2-12C two-post lift allows clear floors so that you can roll floor jacks, toolboxes, and other equipment underneath the elevated vehicle. This lift has a big 12,000 lb. lifting capacity for heavy-duty trucks, utility vehicles, and SUVs.
Dannmar’s D4-9X features runway lengths of 198”, and it’s rated to lift a stout 9,000 lbs. Plus the D4-9X comes with a list of standard features that cost extra on other makes and models.
APEX9-Combo1 Includes: Atlas® Apex 9 ALI Certified 4 Post Hobbyist Parking Lift & Set of 2 RJ-6000 Air/Hydraulic Center Jack 6,000 lbs & Truck Adapter
True asymmetric, with columns at rotated 30°. This places the approximate center of gravity of the vehicle in line with the optimum load capability of the column.
The 12,000 lb. capacity E12 two post car lift provides symmetric lifting capability, maximum room to work underneath vehicles and room to grow. Heavy duty lifts provide the strength and dependability you need for larger vehicles like trucks, vans and buses.
The HD-9AE four-post alignment lift provides 9,000-lbs. of lifting capacity to accommodate a variety of light duty trucks and automobiles.
Looking for the direct-drive operation of the XPR-9FD, but with an even beefier lifting capacity? Then, the XPR-12FD is your car hoist. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 12,000 pound lifting capacity.
Challenger’s Quick Cycle is a simple way to increase the rise and descent speed of your Challenger Lifts. Larger motor (from 2hp to 3hp) and a bigger pump (from 2.5cc to 4.0cc). These components increase the speed of rise from 48 seconds to 27 seconds, equating to a 42% time savings.
The GP-7LCS is a truly one-of-a-kind design. Because it fits in garages with ceilings as low as 9', it boasts the lowest columns ever found on a permanent two-post lift. It can be installed in virtually every garage on the planet and still offers an impressive 58" rise. The BendPak Turf Maintenance Lift Accessory Kit is the most versatile utility vehicle and lawn maintenance two-post lift turf kit in existence.
Challenger Lifts’ 14,000 lb. capacity 4P14EFX and 4P14XFX economy four post car lifts are loaded with features you would expect to pay more for, like louvered approach ramps, solid piece column construction, automatic wheel stops and the highest rise in the industry.
When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12CL, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before.