Need help with installation? Our AI assistant has read this
installation manual and can help you find the right page and walk you through each step.
When your four-post lift needs serious lifting capability for wheel service on heavy-duty trucks, buses, and oversized vehicles, the BendPak RBJ25000 Rolling Bridge Jack delivers uncompromising power and safety. With an industry-leading 25,000 lb lifting capacity, this rolling bridge jack is engineered to handle the most demanding commercial and fleet service operations. Whether you're working on large commercial trucks, transit buses, or heavy equipment, the RBJ25000 provides the strength, reach, and reliability you need to perform full axle and wheel service with confidence.
Powered by a commercial-grade air-hydraulic pump system that requires 125 PSI air pressure, this rolling jack lifts vehicles quickly and efficiently—reaching full rise in just 55 seconds. The pneumatic foot pedal operation keeps your hands free while you position the jack, and the high-pressure hydraulic system operates at up to 7,200 PSI for smooth, controlled lifting performance every time.
Lift Heavy Vehicles with Confidence
Two RBJ25000 rolling bridge jacks will handle a vehicle up to 50,000 lbs. That means these jacks are over-engineered to handle offset centers of gravity on extremely heavy vehicles. Who might need bridge jacks of this caliber? For one, heavy-duty trucks and buses tend to require a bridge jack rated for more than half of the overall vehicle weight. Generally speaking, if you can safely lift a vehicle with the HDS-40 four-post lift, you can safely perform wheel service with the RBJ25000 rolling bridge jack.
The jack's wide 45-inch support base provides exceptional stability, while the adjustable reach extends from 48.5 inches to 63.75 inches at the arm pad, and from 8 inches to 39.5 inches at the top pad. This flexible positioning system lets you precisely target lifting points on vehicles with varying wheelbases and frame configurations, ensuring safe contact and balanced load distribution every time.
Heavy-Duty Steel Contact Pads Built to Last
BendPak bridge jacks feature steel contact pads that are built to withstand heavy use. The four steel contact pads on each rolling bridge jack are in place to support both the axle and the lifting points of your vehicle. The jack is low-profile, so the pads fit comfortably underneath low-stance cars while still offering the range needed for higher-clearance commercial vehicles.
The RBJ25000 includes stackable adapters, giving you even more flexibility when working with unique frame geometries or uneven contact surfaces. Choose from multiple drive-over height configurations using the included short and tall arm and top pad options. With a minimum drive-over height starting at just 9 inches and a maximum lifting height of up to 21.25 inches, this rolling jack adapts to a wide range of vehicle types and service scenarios.
Commercial-Grade Hydraulic Power and Control
A powerful pneumatic-hydraulic power unit creates a dedicated power source for the rolling bridge jack. Two jacks will have separate airlines that can connect together on an optional air-line kit. The foot pedal is air-powered, so a few simple pushes and the jack is fully lifted. This hands-free operation improves safety and workflow efficiency, letting technicians position vehicles and adjust the jack without bending over or fumbling with manual controls.
The included commercial-grade air-hydraulic pump requires 125 PSI air pressure and 10–20 CFM, making it compatible with most professional shop air systems. No electrical power is required, simplifying installation and reducing operating costs. The system delivers 7,200 PSI maximum operating hydraulic pressure, ensuring smooth, reliable lifting performance under full load.
Three Lock Positions for Maximum Safety
Lift to three lock positions for your convenience. The higher the jack, the more undercarriage clearance you get on your four-post lift. Every rolling bridge jack offers premium safety standards at every lock position. The RBJ25000 is over-engineered to easily raise 25,000 lbs in seconds flat, with robust mechanical locks that engage automatically to secure the load at each height setting.
These positive-locking safety mechanisms provide peace of mind during extended service procedures, ensuring the vehicle remains stable and secure even if hydraulic pressure is lost. The jack's design emphasizes fail-safe operation, making it ideal for high-volume commercial environments where safety and uptime are critical.
Key Highlights
25,000 lb lifting capacity — handles the heaviest trucks, buses, and commercial vehicles with ease
Air-hydraulic pump system — fast 55-second full rise time, powered by shop air (no electrical connection required)
Steel lifting pads and stackable adapters — durable, configurable contact surfaces for versatile vehicle compatibility
Three safety lock positions — secure mechanical locks at multiple heights for safe, stable wheel service
Wide support base and adjustable reach — 45-inch base width and reach extending up to 63.75 inches for precise positioning
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs
above for complete specs, dimensions, and detailed feature breakdowns.
California Proposition 65 Warning:
This product may contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
One Year (12-Months) Warranty on the lift structure
One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
One Year (12-Months) Warranty on operating components
One Year (12-Months) Warranty on electrical components (excluding power unit)
One Year (12-Months) Labor Warranty on site or at factory*
One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
What is not covered under this warranty:
Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
Any damage caused by overloading Product beyond rated capacity
Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or
surroundings
Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
Rusted components due to improper maintenance or corrosive environments
Cosmetic defects that do not interfere with product functionality
Damage due to incorrect voltage or improper wiring
Any failure that results from improper installation or use not according to specifications
Damage caused by disasters such as fire, flood, wind, and lightning
Damage caused by unauthorized attachments or modifications
Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak
Inc. will pay reasonable labor costs for the first 12 months only
Responsibilities of Purchaser under this warranty:
Provide dated proof of purchase and maintenance records
In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component (s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said
periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the
availability of replacement parts.
*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.
Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts
(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following
1/1/2011.
US Dollars
California Proposition 65 Warning:
