Need help with installation? Our AI assistant has read this
installation manual and can help you find the right page and walk you through each step.
Professional-Grade Heavy-Duty Lifting for Four-Post Applications
The BendPak RBJ18000 is an industrial-strength rolling bridge jack designed to deliver 18,000 lbs. of lifting capacity for full wheel service capability on your four-post lift. Engineered for professional automotive technicians who work with heavy-duty trucks, buses, commercial vehicles, and equipment with offset centers of gravity, the RBJ18000 compensates for weight distribution challenges that lighter jacks simply can't handle. Whether you're performing tire changes, wheel balancing, alignment work, or brake service on heavy-duty vehicles raised on the BendPak HDS-35 or HDS-40 four-post lift series, this bridge jack is your essential partner for safe, efficient undercarriage access.
Featuring a robust air-hydraulic pump that requires 125 PSI and 10-25 CFM, the RBJ18000 reaches full rise in just 55 seconds, keeping your workflow moving. The maximum hydraulic operating pressure of 7,200 PSI ensures reliable, powerful lifting performance every time. With multiple drive-over heights starting as low as 9 inches, this jack accommodates low-stance vehicles while still offering maximum lifting heights up to 21.25 inches with the tall top pad configuration.
Unmatched Lifting Power for Heavy-Duty Applications
While the 18,000-lb. capacity of the RBJ18000 will handle the weight of many heavy-duty vehicles, some larger trucks, buses, and commercial vehicles have significantly offset centers of gravity. It's critical to ensure your bridge jack is rated for the entire weight of both the front and rear axles of the vehicle being lifted. The extra lift capacity of the RBJ18000 compensates for a shifted center of gravity in heavy-duty vehicles being raised on the HDS-35 or HDS-40 four-post lift series, delivering the safety margin and performance you need for demanding shop applications.
This bridge jack provides the muscle you need to confidently lift massive city buses, agricultural equipment, heavy-duty trucks, and other oversized vehicles. With maximum arm pad reach of 63.75 inches and minimum arm pad reach of 48.5 inches, plus a support base width of 45 inches, the RBJ18000 provides exceptional reach and stability for a wide range of vehicle sizes and lift points.
Heavy-Duty Steel Contact Pads Built to Last
BendPak bridge jacks feature steel contact pads that are built to withstand heavy use in professional shop environments. The four steel contact pads on each rolling bridge jack are strategically positioned to support both the axle and the lifting points of your vehicle, ensuring safe, stable contact every time. The jack's low-profile design allows the pads to fit comfortably underneath low-stance cars, while the stackable adapters provide additional versatility for varying vehicle heights and lift point configurations.
With configurations including short arm pads, short top pads, tall arm pads, and tall top pads, the RBJ18000 gives you multiple drive-over heights and maximum lifting heights to accommodate virtually any vehicle that rolls into your bay. Whether you're working on compact cars or heavy-duty trucks, you have the flexibility to configure your lifting setup for optimal safety and access.
High-Pressure Hydraulic Power Unit with Air-Hydraulic Pump
The high-pressure hydraulic power unit on the RBJ18000 is engineered to lift the most demanding loads with ease. Powerful enough to raise massive city buses and farm equipment on your HD-35 four-post lift, this jack delivers fast, reliable performance when you need it most. A simple foot pedal controls the jack, allowing hands-free operation so you can position the vehicle safely and efficiently. The jack reaches its maximum extension in just 55 seconds, minimizing downtime and keeping your shop productive.
Powered by a commercial-grade air-hydraulic pump, the RBJ18000 requires no electrical power—just connect to your shop's compressed air supply at 125 PSI with 10-25 CFM. An optional air-line kit is available for added convenience and flexibility in your shop layout.
Three Lock Levels for Ultimate Versatility
Your work, your shop. With three lock positions, your RBJ18000 rolling bridge jack adapts to the way you get things done. Different factors change your working height: operator preference, operator height, vehicle clearance, ceiling height, and more. With three lock positions on the jack, your ultimate working height is that much more versatile, giving you the flexibility to work comfortably and efficiently on every vehicle.
Whether you need to lock the jack at a lower position for quick access or extend it to its full height for deeper undercarriage work, the RBJ18000 gives you precise control and the confidence that your lift is securely locked in place.
Key Highlights
18,000 lb lifting capacity – handles heavy-duty trucks, buses, and commercial vehicles with offset centers of gravity
Fast 55-second rise time – powered by a commercial-grade air-hydraulic pump requiring 125 PSI and 10-25 CFM
Low 9-inch minimum drive-over height with maximum lifting heights up to 21.25 inches
Steel lifting pads and stackable adapters – built for heavy use and maximum versatility
Three lock positions – adapt working height to operator preference, vehicle clearance, and ceiling height
7,200 PSI max hydraulic pressure – reliable, powerful performance for the toughest jobs
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs
above for complete specs, dimensions, and detailed feature breakdowns.
Note: Dimensions listed are taken from the upper surface of the suitable four-post lift runway. Included commercial-grade air-hydraulic pump requires 125 PSI and 10-25 CFM.
WARNING: Proposition 65 requires warnings on products that contain certain metals/chemicals that the State of California has determined may cause cancer and/or birth defects or other reproductive harm, if those products expose consumers to such chemicals above certain threshold levels that are designed to protect public health. For more information go to www.P65Warnings.ca.gov
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
One Year (12-Months) Warranty on the lift structure
One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
One Year (12-Months) Warranty on operating components
One Year (12-Months) Warranty on electrical components (excluding power unit)
One Year (12-Months) Labor Warranty on site or at factory*
One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
What is not covered under this warranty:
Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
Any damage caused by overloading Product beyond rated capacity
Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or
surroundings
Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
Rusted components due to improper maintenance or corrosive environments
Cosmetic defects that do not interfere with product functionality
Damage due to incorrect voltage or improper wiring
Any failure that results from improper installation or use not according to specifications
Damage caused by disasters such as fire, flood, wind, and lightning
Damage caused by unauthorized attachments or modifications
Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak
Inc. will pay reasonable labor costs for the first 12 months only
Responsibilities of Purchaser under this warranty:
Provide dated proof of purchase and maintenance records
In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component (s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said
periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the
availability of replacement parts.
*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.
Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts
(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following
1/1/2011.
US Dollars
