Need help with installation? Our AI assistant has read this
installation manual and can help you find the right page and walk you through each step.
The BendPak RBJ15000 Rolling Bridge Jack transforms your four-post lift into a full-service powerhouse. With a robust 15,000-lb. capacity, this rolling bridge jack is engineered to lift half of a 30,000-lb. truck or commercial bus, giving you complete wheel service capability on the heaviest vehicles. Whether you're running a professional shop or need commercial-grade equipment for specialty service work, the RBJ15000 unlocks access to wheel balancing, alignment, tire changing, and brake service—capabilities that standard four-post lifts alone cannot provide.
Designed to work seamlessly with heavy-duty four-post lifts like the HDS-35, this bridge jack delivers the lifting power and precision you need for massive, specialty equipment. Its air-hydraulic power system requires no electrical hookup—just connect to your shop air supply at 125 PSI (10–25 CFM), and you're ready to lift. With its low-profile design, stackable adapters, and multiple pad configurations, the RBJ15000 adapts to a wide range of vehicle lifting points, from low-stance cars to towering commercial trucks.
Steel Lifting Pads for Heavy-Duty Durability
The RBJ15000 features steel contact pads built to withstand years of heavy professional use. Four steel contact pads come standard, designed to support both the axle and critical lifting points of your vehicle safely and securely. These pads are engineered for rugged durability, ensuring dependable performance even under the extreme loads of commercial buses and heavy trucks. The jack's low-profile stance allows the pads to fit comfortably underneath low-clearance vehicles, giving you versatile service capability across your entire fleet.
Stackable adapters are included, allowing you to customize the pad height and reach to match any vehicle configuration. Choose from short or tall arm pads and top pads, with drive-over heights ranging from 9" to 12" and maximum lifting heights up to 22 inches. This flexibility ensures you can safely lift vehicles with varying ground clearances and suspension designs.
Air-Hydraulic Power Unit – Simple and Powerful
The RBJ15000 is powered by a high-pressure air-hydraulic pump that operates at 6,000 PSI, delivering smooth, reliable lifting performance with no electrical connection required. Simply attach the included airline to your shop air supply, and control the lift with the ergonomically designed foot pedal. This hands-free operation allows you to position the jack, align the pads, and lift the vehicle with ease and precision.
The jack reaches full rise in just 55 seconds, keeping your workflow efficient even on the busiest service days. No power cords, no outlet required—just compressed air and hydraulic muscle. For shops running multiple jacks, the optional airline kit allows two bridge jacks to share a single air supply, reducing clutter and simplifying your setup.
Three Lock Levels for Optimal Working Height
The RBJ15000 features three lock positions, giving you the flexibility to raise the vehicle to the height that's most comfortable for the job at hand. Whether you're performing tire changes, brake service, suspension work, or alignment adjustments, you can lock the jack at the ideal level and work with confidence. Combined with the adjustable height of your four-post lift, you have complete control over your working position—reducing fatigue and increasing safety.
Why the RBJ15000 is Essential for Heavy-Duty Service
If you have a four-post truck lift, you already have excellent undercarriage access—but the wheels remain out of reach. The RBJ15000 Rolling Bridge Jack solves that problem, opening the door to a full range of service opportunities:
Wheel balancing and alignment on heavy trucks and buses
Tire service with full access to tires, brakes, and suspension
Brake and rotor work without removing the vehicle from the lift
Suspension and steering service on commercial and specialty vehicles
Fleet maintenance efficiency—service more vehicles, faster
The RBJ15000 is built for professional shops that handle heavy, specialty equipment and need maximum versatility. It pairs perfectly with BendPak's heavy-duty four-post lifts, such as the HDS-35, and is designed to handle the toughest jobs with ease.
Key Highlights
15,000-lb. lifting capacity – lifts half of a 30,000-lb. truck or bus
Steel lifting pads standard – rugged durability for heavy-duty use
Stackable adapters – customize pad height and reach for any vehicle
Air-hydraulic power unit – no electrical hookup required, 55-second rise time
Three lock positions – adjustable working height for maximum comfort and safety
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs
above for complete specs, dimensions, and detailed feature breakdowns.
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
One Year (12-Months) Warranty on the lift structure
One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
One Year (12-Months) Warranty on operating components
One Year (12-Months) Warranty on electrical components (excluding power unit)
One Year (12-Months) Labor Warranty on site or at factory*
One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
What is not covered under this warranty:
Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
Any damage caused by overloading Product beyond rated capacity
Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or
surroundings
Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
Rusted components due to improper maintenance or corrosive environments
Cosmetic defects that do not interfere with product functionality
Damage due to incorrect voltage or improper wiring
Any failure that results from improper installation or use not according to specifications
Damage caused by disasters such as fire, flood, wind, and lightning
Damage caused by unauthorized attachments or modifications
Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak
Inc. will pay reasonable labor costs for the first 12 months only
Responsibilities of Purchaser under this warranty:
Provide dated proof of purchase and maintenance records
In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component (s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said
periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the
availability of replacement parts.
*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.
Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts
(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following
1/1/2011.
US Dollars
