The Chicago Pneumatic CPXHT-125 is an all-in-one compressed air solution designed specifically for high-temperature applications. With a maximum inlet temperature of 180°F, this refrigerated dryer eliminates the need for a separate aftercooler, saving you space, installation time, and cost. Engineered to deliver 125 CFM of clean, dry compressed air for 25 HP compressors, the CPXHT-125 integrates multiple critical components into one compact, efficient unit. From the air-cooled aftercooler to the moisture separator, electronic water drain, and 3-micron coalescing filter, every element works together to remove dirt, oil, and moisture—protecting your tools, pneumatic equipment, and finished products from contamination.
Designed for ease of use, the CPXHT-125 arrives ready to install with a compact footprint (23" x 18" x 31") that fits into tight workspaces. Operating on standard 115V single-phase power with a six-foot power cord included, there's no need for expensive electrical upgrades or special wiring. Whether you're running a busy auto body shop, manufacturing facility, or industrial operation where hot compressed air is a reality, this dryer delivers reliable performance and consistent 50°F dew point to keep your air system running smoothly.
The Chicago Pneumatic CPXHT-125 isn't just a dryer—it's a complete air treatment system. The integrated inlet strainer precooler/reheater starts the process by reducing air temperature and filtering out large particles before the air enters the refrigeration circuit. The stainless steel and copper heat exchanger efficiently cools the compressed air to condense moisture, which is then removed by the moisture separator and evacuated via the automatic drain valve. No manual draining, no monitoring—just set it and forget it.
After moisture removal, the air passes through a 3-micron coalescing filter that captures oil aerosols and fine particulates, ensuring your downstream equipment receives clean, dry air. The reheater then brings the air temperature back up slightly to prevent condensation in your lines. An ambient air condenser filter keeps the refrigeration system running efficiently by preventing dust and debris from clogging the condenser coils. This multi-stage process delivers a consistent 50°F dew point (±2°F), protecting your tools, paint finishes, and pneumatic systems from water damage and contamination.
Many refrigerated dryers struggle or fail when faced with inlet temperatures above 100°F. The CPXHT-125 is purpose-built for high-heat applications, handling inlet temperatures up to 180°F without breaking a sweat. This makes it ideal for use with rotary screw compressors, piston compressors running in hot climates, or any installation where an aftercooler isn't practical or desirable.
Operating across a wide ambient temperature range—from 34°F to 95°F—this dryer performs reliably in both climate-controlled shops and fluctuating environmental conditions. With a maximum operating pressure of 232 PSIG and 1" NPT inlet/outlet connections, it's designed to integrate seamlessly with industrial compressed air systems. At just 3/4 kW operating power, the CPXHT-125 is also energy-efficient, keeping your operating costs low while delivering professional-grade air treatment.
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs above for complete specs, dimensions, and detailed feature breakdowns.
BelAire Compressors, Seller, warrants products against defects in workmanship and materials under normal use and service, as follows:
Refrigerated non-cycling, high temperature and heatless desiccant dryers shall be warranted for twelve (12) months from date of start-up or eighteen (18) months from date of shipment from the factory, whichever occurs first, to include parts and labor. Parts shall be warranted for ninety (90) days from installation or for the remainder of the warranty on the product being repaired, whichever is longer.
Warranty coverage is reimbursed at 70% posted shop labor rate. Travel is reimbursed at $0.50 per mile. Miscellaneous charges require pre-approval.
Seller requires that all warranty service work be authorized prior to a service call for all claims. Parts should be taken to every service call to take care of the problem in one trip. Seller does not reimburse trouble-shooting.
To be eligible for warranty consideration, Claimant must:
Notice of alleged defect must be given to Seller in writing with all identifying details including serial number, model number, equipment type and date of purchase, within thirty (30) days of discovery of defect during the warranty period. Seller’s sole obligation on this warranty shall be, at its option, to repair, replace or refund the purchase price of any product or part which proves to be defective. If requested by Seller, such product or part thereof must be promptly returned to Seller, freight collect for inspection.
This warranty shall not apply and Seller shall not be responsible nor liable for:
In no event shall Seller be liable for any claims, whether arising from breach of contract or warranty claims of negligence or negligent manufacture, in excess of the purchase price of the equipment. It is incumbent on the user to provide complete and accurate records of maintenance and verifiable proof of purchase and use of genuine factory repair and replacement parts.
THIS WARRANTY IS THE SOLE WARRANTY OF SELLER AND ANY OTHER WARRANTIES, EXPRESS, IMPLIED IN LAW OR IMPLIED IN FACT, INCLUDING ANY WARRANTIES OF MERCHANTABILITY AND FITNESS FOR PARTICULAR USE, ARE HEREBY SPECIFICALLY EXCLUDED.
Chicago Pneumatic
Chicago Pneumatic
Chicago Pneumatic
Chicago Pneumatic
FSCurtis
US Dollars