 |
 |
 |
|
BendPak PL-12000DPS Tandem/Independent Platforms Parking Lift
PL-12000DP/DPS
BendPak’s newest PL-12000DP and PL-12000DPS parking lifts are revolutionary vehicle storage solutions for those challenged with owning more cars and trucks than parking spaces to store them. They can greatly expand the number of cars in a facility without expanding building space. As the costs of commercial and residential development increase, gaining additional parking spaces in the same usable space provides instant value. These mechanical parking systems are designed to increase parking density and cut costs over traditional parking methods.
Two Independent Platforms
Because each platform operates independently, one vehicle can be lowered while the other side remains still. This eliminates the need to “shuffle” vehicles from the half of the lift where vehicles are not being accessed.
Still the Best
For over 50-years, our experience as the world’s premier parking lift manufacturer enables us to deliver optimal solutions for our clients, from the initial problem, design consultation, then ultimately through fabrication, installation, and support. We’re the leading turnkey provider for all your parking lift needs, whether for commercial garages, or residential applications.
The cutting-edge PL-12000 series lifts reflect our continuing commitment to design and deliver innovative vehicle storage solutions that offer only the highest value to our customers. The space-saving design means you can now stack one vehicle above another in the same space typically required for a single parking stall. With the strength to handle loads up to 6,000 lbs. and a footprint considerably smaller than other mechanical parking systems, they deliver more parking capability space per square inch than any other lift in its class.
Reliable and Safe
A dependable hydraulic drive system provides reliable power that requires very little service and maintenance over time. Tandem drive cylinders, combined with an intelligent hydraulic circuit, provide precise, equalized lifting of the platforms. Our promise to deliver a safe parking lift is the most important commitment we make in order to earn your trust and ensure lock systems and easy to understand operator controls, operators will be pleasantly surprised at how easy they are to safely operate.
Performance Guaranteed
We’re so sure that our lifts will out-perform all others; we’re backing that promise with a full five-year warranty. The best warranty is the business gives you more than just peace of mind; it’s proof that we took a little extra care building your lift and every precaution was taken to maintain the highest degree of quality, dependability, and reliability.
|
Specifications
|
PL-12000DP
|
PL-12000DPS
|
|
Style
|
Tall Rise & Extended Length
|
Standard Rise & Short Runways
|
|
Capacity Per Platform
|
|
Lifting Capacity*
|
6,000 lbs. / 2,722 kg
|
|
Platforms / Dimensions
|
|
Number of Platforms
1
|
2
|
|
Total Width
2
|
221.5" / 5,624 mm
|
|
Outside Length
|
198" / 5028 mm
|
174" / 4,418 mm
|
|
Total Length
|
242.5" / 6,160 mm
|
218.5" / 5,550 mm
|
|
Total Height
|
130.5" / 3,314 mm
|
118.5" / 3,009 mm
|
|
Min. Runway Height
|
4.75" / 121 mm
|
|
Max Rise
|
82.2" / 2,088 mm
|
70.2" / 1,784 mm
|
|
Width Between Posts
|
211" / 5,362 mm
|
|
Width Between Short & Double Posts
|
100.25" / 2,546 mm
|
|
Width Between Platforms
|
29" / 739 mm
|
|
Width Between Runways
|
35" or 41" / 887 or 1,045 mm
|
|
Runway Length
|
183" / 4,649 mm
|
159" / 4,039 mm
|
|
Runway Width
|
19" / 482 mm
|
|
Drive Thru Height
|
80.5" / 2047 mm
|
68.5" / 1742 mm
|
|
Outside Edge of Runways
|
76" or 82" / 1,930 or 2,083 mm
|
|
Safety Lock Positions
|
6
|
|
Power
|
|
Lifting Time
|
≈45 Seconds
|
|
Motor
3
|
220 VAC / 50/60 Hz / 1 Ph
|
- Each Platform consists of one Powerside and one Offside Runway and the two optional Aluminum Decks between them.
- Total Width is defined as the dimensions outside-to-outside of the Baseplates.
- Special voltages available upon request
To View or Download the Specification Diagram Click Here
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition) or ANSI/UL 201. Consult
www.autolift.org for a complete list.
COMMERCIAL PARKING LIFT LIMITED WARRANTY
Better Products – Better Service – Better Value
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration:
From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
- Two Years (24-Months) Warranty on the lift structure
- One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Warranty on electrical components (excluding power unit)
- One Year (12-Months) Labor Warranty on site or at factory*
- One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- And damage caused by overloading lift beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc product
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. **For all BendPak brand two-post and four-post surface mounted lifts manufactured on or following 1/1/2011.
Limitation of Liability
In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
https://bendpakcs.freshdesk.com/a/tickets/new
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
