 |
 |
 |
 |
BendPak PL-6KT Triple / Independent Platforms Parking Lift 6,000-lb. Per Deck (18,000 lbs. total)
The PL-6KT triple-wide platform parking lift is one of the most efficient parking units ever designed. The key to its design is the streamlined, four-column structure that leaves all three lifting platforms free from surrounding posts, making it safer and easier to enter and exit parked vehicles.
This car lift is equally useful in large residential garages and commercial spaces. Municipal parking lots and custom shops in need of extra parking don’t need to waste money buying multiple lifts that may or may not even fit in their space. A triple-wide lift is the most efficient way to turn three parking spots into six.
One lift houses four vehicles
If you’re in need of a lot of extra parking, your first instinct may be to buy multiple parking lifts. However, the smarter bet is to order a BendPak triple-wide specialty lift. These unique car lifts house six vehicles for long or short-term storage. It’s much smarter to buy one extra-wide car lift than it is to buy three smaller ones. It also takes up less space and won’t clutter your garage.
Three independent platforms
Three full-width, galvanized steel platforms cover the length and width of this car lift. Resistant to oil, weather and abuse, these decks will easily last the lifetime of your unit. Each platform moves independently of the other two, which means more vehicles can be stored without rummaging through the entire bottom row just to get to one raised vehicle. Keep life simple! The PL-6KT is a triple-wide marvel that keeps you organized without slowing you down.
Internally routed hydraulic lines and cables
All hydraulic lifting cylinders and lifting cables are routed internally throughout the mammoth structure of this lift. Clever engineering prevents the extensive network of cables from awkwardly crossing over each other, so the platforms rise and descend safely at all times.
Single-position, auto-engaging lock
All three platforms automatically lock into place at the max rise position. This is the safest way to store vehicles on your parking lift, as the platform and hydraulic/suspension system is virtually incapable of failing, even in the extremely unlikely event of hydraulic hose or cable failure.
Park safer inside
Don’t risk keeping your vehicles exposed to the elements. Theft, weather and environmental damage can wreak havoc on your property. Keep your vehicles bundled up safe and sound. They’re second in importance only to your children, and this parking lift is a cradle they’ll never outgrow.
Power options
This parking lift operates on 110V or 220V power. International voltages are available upon request.
GoPro Time Lapse of BendPak Home Garage Lift Installation
BendPak Home Garage Car Lift Installation
Specifications
|
PL-6KDT
|
PL-6KDTX
|
PL-6KT
|
Style
|
Style
|
Multi-Platform
|
Ex-Wide Multi-Platform
|
Triple Multi-Platform
|
Capacity
|
Lifting Capacity
|
6,000-lb. Per Deck (12,000 lbs. total) / 2,722 kg
|
Overall Width
|
210.75” (5,353 mm)
|
250” / 6,350 mm
|
308” (7,834 mm)
|
Overall Length
|
236-1/2” / 6,008 mm
|
Overall Height
|
122.75” (3,118 mm)
|
123.75” (3,140 mm)
|
Min. Runway Height
|
9” / 230 mm
|
Max. Rise
|
89” / 2,261 mm
|
Width Between Posts
|
185-1/2" / 4,715 mm
|
225” / 5,713 mm
|
283" (7,197 mm)
|
Platform Width
|
82" / 2,086 mm
|
Length of Platforms
|
152" / 3,862 mm
|
Drive-thru Clearance
|
93" / 2,374 mm
|
Locking Positions
|
1 (Adjustable)
|
Lifting Time
|
30 Seconds
|
Standard Motor
|
220 VAC / 60 Hz. 1Ph.
|
Shipping
|
Shipping Weight
|
6,905-lbs. (3,132 kg)
|
7,125-lbs. (3231 kg)
|
8,889-lbs. (4,032 kg)
|
Shipping Dimensions
|
234" x 32" x 62" (5,943 x 812 x 1,574 mm)
|
310" x 32" x 63" (7,874 x 813 x 1,600 mm)
|
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult
www.autolift.org for a complete list.
Better Products – Better Service – Better Value
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
- Five Years (60-Months) Warranty on the lift structure
- Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Warranty on electrical components (excluding power unit)
- One Year (12-Months) Labor Warranty on site or at factory*
- One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by overloading Product beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any failure that results from improper installation or use not according to specifications
- Damage caused by disasters such as fire, flood, wind, and lightning
- Damage caused by unauthorized attachments or modifications
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any
damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.
Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts
(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following
1/1/2011.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- 6,000-lb. capacity per deck (18,000 lbs. total)
- Perfect for cars, light trucks, motorcycles and ATVs
- Rugged I-beam and C-channel construction
- Built-in wheel stops
- Wide base-plate for maximum stability
- Front and rear wheel chocks
- Superstructure features durable powder-coat finish
- Dual hydraulic cylinders with heavy-duty steel lifting cable
- Heavy-duty steel construction
- Reliable electric-hydraulic power system
- Full-width platform to keep bottom vehicles protected
- Simple controls
- Oversized sheave diameter reduces cable fatigue
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1-1/4" roller axles
- Multi-position safety locks in each column
- Runways feature non-skid surface
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Customizable power unit location
This is a Special Order Item has a 90 - 120 Day Lead-time. There is 50% NON REFUNDABLE Charge
|
|
 |
 |
 |
 |

|