 |
 |
 |
|
BendPak XPR-9TF Floorplate 2 Post Lift
Supersedes XPR-9S
The XPR-9TF two-post lift has been built from the ground up for professional shops. Powerful and secure, this lift is sure to get the job done. It boasts an incredibly rapid lifting system and a robust menu of features to increase proficiency and productivity. The end result is lower operating expenses and enhanced efficiency. When you want to get more done in less time, you’re going to want the XPR-9TF.
Automatic Arm Restraints
The XPR-9TF features an automatic engage/disengage arm restrain feature which engages when the lift is raised and disengages when it lowers. It’s an essential safety feature, as well as a simple one. When lowered, the lift arms are easy to position under your vehicle chassis.
Maintenance-free Load Bearings
BendPak uses UHMW (ultra-high molecular weight polyethylene) load bearings because they are resistant to chemicals, weather, wear, etc. and will never need to be replaced as long as you own your lift. While other companies use roller bearings that require lubrication, we decided to utilize UHMW load bearings which never need to be lubricated or maintained.
Wide and Narrow Installation
The XPR-9TF allows you to work in either a wide or narrow configuration. With a wide configuration you’ll be able to raise wider vehicles if you have the space for it. If you are limited on space, narrow installation is the way to go.
These two-post lift models have the capacity to effortlessly lift full-size pickups and commercial vehicles, yet they still provide specific capabilities for sport and compact cars, both foreign and domestic. The XPR-9TF is a rugged model with a 9,000-lb. maximum capacity, making it perfect for most if not all automotive shops. When it comes to ease-of-use, it doesn’t get much better than the XPR-9TF.
|
Specifications
|
XPR-9TF
|
|
Style
|
Two-Post Floorplate Lift
|
|
Capacity
|
|
Lifting Capacity
|
9,000 lbs. (4,082 kg)
|
|
Rise
|
|
Rise + Pad
|
72.75" (1,849 mm)
|
|
Min Height + Pad
|
4.75" (120 mm)
|
|
Time to Full Rise
|
45 Seconds
|
|
Outside Dimensions
|
|
Overall Height
|
123" (3,128 mm)
|
|
Overall Width
|
132" or 145" (3,354 or 3,684 mm)
|
|
Outside Columns
|
124.75" or 138" (3,170 or 3,505 mm)
|
|
Inside Dimensions
|
|
Inside Columns
|
103.5" or 116.5" (2,629 or 2,959 mm)
|
|
Drive-Thru Clearance
|
91" or 104" (2,315 or 2,645 mm)
|
|
Arms & Pads
|
|
Min Front Arm Reach
|
25.5" (646 mm)
|
|
Max Front Arm Reach
|
49.5" (1,257 mm)
|
|
Min Rear Arm Reach
|
32.25" (819 mm)
|
|
Max Rear Arm Reach
|
52.5" (1,333 mm)
|
|
Max Load Per Arm
|
2250 lbs. (1,020 kg)
|
|
Power & Weight
|
|
Noise
|
45dB
|
|
Power
|
220V
|
|
Weight
|
1798 lbs.
|
The design, material and specifications are subject to change without notice.
*CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition) or ANSI/UL 201. Consult
www.autolift.org for a complete list.
Better Products – Better Service – Better Value
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
- Five Years (60-Months) Warranty on the lift structure
- Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Warranty on electrical components (excluding power unit)
- One Year (12-Months) Labor Warranty on site or at factory*
- One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by overloading Product beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any failure that results from improper installation or use not according to specifications
- Damage caused by disasters such as fire, flood, wind, and lightning
- Damage caused by unauthorized attachments or modifications
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any
damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.
Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts
(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following
1/1/2011.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
