 |
 |
 |
 |
BendPak HDS-14X 14,000-lb. Capacity Extended Length Car Lift
To view the lift inspection guide
Click Here
The HDS-14X Offers Extreme Length, Extreme Ease-of-Use
We call this our "limo style" lift because of how much front-to-back clearance it offers. Now your longest vehicles can make it over or under the lift with ease, and because it fits low-profile vehicles as well as heavy, high-stance ones, this lift instantly brings BendPak's unparalleled versatility and legendary craftsmanship right to your garage. If you're familiar with our standard-sized lifts, you know that BendPak equipment is better-built and longer-lasting, no matter the size or weight capacity of the lift.
The HDS-14X is an ideal four-post lift for commercial shops looking to expand their service abilities. The runways are extended 30" more than our standard-length model to a whopping 229". The extended approach ramps provide a safe, gradual climb, and an ample 70" rise permits most mechanics to stand upright to perform oil changes, exhaust service, wheel service and every other undercarriage activity.
Super-long 229" runways
The core of the HDS-14X is its expanded runway length. At 229", there isn't much this lift can't handle in its weight class. More vehicles mean more opportunities for profit. Best of all, smaller vehicles fit too, so this one lift alone might be enough to service every vehicle your customers bring in.
Dual-hub cable sheaves
Dual-hub cable sheaves reduce stress, fatigue and wear across the entire structure of the car lift. Large sheaves improve the durability of the entire lift, so this limo style lift utilizes huge, 10.5” diameter cable sheaves within the runway and cross tubes, as well as massive 2.25" diameter sheave axles.
Large base plates
10" x 12" base plates provide a solid foundation that doesn't excessively clutter your space
Spring-loaded safety locks
Safety locks are one of the most crucial features of a car lift. BendPak locks engage continuously as the lift rises. The HDS-14X offers adjustable safety ladders, permitting fast, simple runway leveling. This is especially useful when compensating for slope
Secondary lock system
A cable slack detection system acts as a backup lock, catching and stabilizing the lift platforms in the unlikely development of slack in the cables.
Longer approach ramps
Extended approach ramps decrease the drive-on angle of the vehicle, which is especially useful for low-riding sports cars that might otherwise get scratched or damaged.
Optional RJ7W Rolling Bridge Jack
The optional 7,000-pound capacity rolling jacks is enough to engage the frame of a 14,000-lb. vehicle and hoist half of it in the air. Rolling bridge jacks are necessary for four-post lift operators looking to maximize their shop capabilities and perform wheel service. BendPak bridge jacks are second-to-none in quality and are highly recommended for all full-service shops.
Model
|
HDS-14
|
HDS-14X
|
Style
|
Standard Length
|
Extended Length
|
Capacity
|
Lifting Capacity: (*)
|
14,000 lbs. (6,350 kg)
|
*Max Capacity / Front Axle
|
7,000 lbs. (3,175 kg)
|
*Max Capacity / Rear Axle
|
7,000 lbs. (3,175 kg)
|
Rise
|
A - Min. Runway Height
|
7.5" (191 mm)
|
B - Max. Rise
|
70" (1,778 mm)
|
C - Max. Lifting Height
|
77.5" (1,969 mm)
|
Time to Full Rise
|
60 seconds
|
Outside Dimensions
|
D - Overall Width
|
130" (3,302 mm)
|
E - Outside Length
|
213" (5,410 mm)
|
243" (6,172 mm)
|
F - Overall Length
|
242" (6,147 mm)
|
272" (6,908 mm)
|
G - Height of Columns
|
92" (2,337 mm)
|
Inside Dimensions
|
H - Width Between Columns
|
120" (3,048 mm)
|
I - Drive-Thru Clearance
|
98" (2,489 mm)
|
Runways
|
J - Runway Width
|
20" (508 mm)
|
K - Length of Runways
|
197.5" (5,017 mm)
|
227.5" (5,778 mm)
|
L - Width Between Runways
|
34.5" or 41.5" (876 or 1,054 mm)
|
M - Runway Centerline
|
57.5" or 64.5" (1,461 or 1,638 mm)
|
N - Outside Edge of Runways
|
77.5" or 84.5" (1,969 or 2,146 mm)
|
Minimum Wheelbase
|
Rated Capacity
|
140" (3,556 mm)
|
170" (4,318 mm)
|
75% Capacity
|
120" (3,048 mm)
|
145" (3,683 mm)
|
50% Capacity
|
100" (2,540 mm)
|
120" (3,048 mm)
|
25% Capacity
|
80" (2,032 mm)
|
95" (2,413 mm)
|
Locking
|
Locking Positions
|
15
|
Lock Spacing
|
Every 4" (102 mm)
|
Power Unit
|
Motor
|
220 VAC / 60 Hz / 1Ph
|
Noise
|
45 dB
|
Shipping
|
Weight
|
2,606-lbs. (1182 kg)
|
2,740 lbs. (1,242 kg)
|
Dimensions
|
209" x 22" x 29" (5309 mm x 558 mm x 737 mm)
|
239" x 22" x 29" (6,070 mm x 558 mm x 737 mm)
|
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition)or ANSI/UL 201. Consult
www.autolift.org for a complete list.
Click on Image to Download or Enlarge It
Better Products – Better Service – Better Value
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
a Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
a Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
a One Year (12-Months) Labor Warranty on site or at factory
a One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- And damage caused by overloading lift beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc product
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. **For all BendPak brand two-post and four-post surface mounted lifts manufactured on or following 1/1/2011.
Limitation of Liability
In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
 |
 |
 |
 |

|