Ranger R980DP-L 110V Swing-Arm Tire Changer & DST2420X Dynamic Wheel Balancer Combo

The Ranger R980DP-L 110V Swing-Arm Tire Changer and DST2420X Dynamic Wheel Balancer Combo delivers a complete professional tire service solution for automotive repair shops, tire service centers, and busy commercial garages. Combining the R980DP-L dual-assist tire changer with 30-inch capacity and the DST2420X digital wheel balancer, this package provides the equipment needed for efficient tire mounting, demounting, and accurate wheel balancing.

Designed for shops servicing passenger cars, SUVs, pickup trucks, performance vehicles, and compatible light-duty trucks, this Ranger combo offers an excellent combination of performance, versatility, and value. The R980DP-L features a 110V electrical configuration, space-saving swing-arm design, and dual-assist technology to help technicians handle challenging low-profile, run-flat, and stiff-sidewall tire assemblies. The DST2420X complements the tire changer with Ranger Digital Sensor Technology, multiple balancing modes, and fast six-second balancing cycles, while included tape wheel weight rolls support everyday tire service operations.

Ranger R980DP-L & DST2420X Combo Features

• Complete Tire Service Package: Combines a professional dual-assist tire changer, digital wheel balancer, and tape wheel weight rolls in one convenient equipment bundle.
• R980DP-L 110V Tire Changer: Provides professional tire mounting and demounting capabilities with a 110V electrical configuration.
• 30-Inch Tire Changing Capacity: Accommodates a broad range of compatible passenger car, SUV, pickup truck, and light-duty vehicle wheel assemblies.
• Dual-Assist Technology: Provides additional support when servicing low-profile, run-flat, performance, and stiff-sidewall tires.
• Space-Saving Swing-Arm Design: Offers convenient tire-changing operation while helping conserve valuable shop floor space.
• Improved Tire Bead Control: Assist components help technicians maintain proper bead positioning during mounting and demounting.
• Reduced Operator Fatigue: Mechanical assistance helps minimize manual effort when handling challenging tire assemblies.
• DST2420X Dynamic Wheel Balancer: Provides professional digital wheel balancing for passenger cars and compatible light-duty vehicles.
• Ranger Digital Sensor Technology: Supports accurate and repeatable wheel imbalance measurement.
• 16-Digit Digital Signal Processor: Processes balancing measurements for precise weight correction.
• Quartz Piezoelectric Load Sensors: Multi-directional sensors help detect wheel imbalance during balancing operations.
• Multiple Balancing Modes: Dynamic, Static, and Performance Alloy settings accommodate different wheel balancing requirements.
• Six-Second Balancing Cycles: Helps technicians complete wheel balancing operations quickly and efficiently.
• Low-RPM Balancing Operation: Supports controlled wheel measurement during balancing cycles.
• Automatic Braking: Helps streamline wheel positioning following balancing measurements.
• Top-Dead-Center Indicators: Assist technicians with locating balancing correction positions.
• Included Tape Weight Rolls: Provides adhesive wheel balancing weights for compatible applications.
• Professional Shop Productivity: Supports a coordinated workflow from tire removal and installation through final wheel balancing.

Ranger R980DP-L 110V Dual-Assist Swing-Arm Tire Changer

The Ranger R980DP-L Tire Changer is designed for professional automotive service environments that require additional tire-changing assistance beyond a conventional swing-arm machine.

Featuring a 30-inch tire-changing capacity, dual-assist system, and 110V electrical configuration, the R980DP-L provides technicians with additional control when handling demanding tire mounting and demounting operations.

Its professional swing-arm design maintains a familiar operating layout while helping conserve valuable shop floor space. This makes the R980DP-L an excellent choice for automotive repair shops, tire service departments, and performance garages seeking expanded tire service capabilities.

110V Electrical Configuration for Shop Flexibility

The Ranger R980DP-L features a 110V electrical configuration, making it a practical option for automotive service facilities equipped with compatible electrical service.

This configuration combines the convenience of a 110V tire changer with the additional capabilities of a professional dual-assist system.

For shops upgrading their tire-changing equipment, the R980DP-L offers a versatile solution that supports demanding tire service requirements while maintaining the familiar operation of a swing-arm tire changer.

Dual-Assist Technology for Low-Profile & Run-Flat Tires

The R980DP-L dual-assist tire-changing system provides additional mechanical support for tire assemblies that can be difficult to service using conventional equipment.

Low-profile tires, run-flat tires, and performance tire assemblies often feature stiff sidewalls that create additional resistance during mounting and demounting. The dual-assist system helps technicians manage tire bead positioning and movement, reducing the amount of manual effort required during service.

This additional support is especially valuable for shops regularly servicing modern performance vehicles, SUVs, pickup trucks, and compatible off-road tire packages.

By helping technicians maintain better control over challenging tire assemblies, the R980DP-L supports a more efficient tire-changing process while helping reduce operator fatigue.

Improved Bead Control for Difficult Tire Assemblies

Proper tire bead positioning is essential when servicing low-profile, run-flat, and stiff-sidewall tires.

The Ranger R980DP-L assist system helps technicians control tire bead movement and maintain proper positioning throughout the mounting and demounting process.

This added assistance is particularly useful when the tire bead must remain within the wheel's drop center to reduce mounting resistance and prevent unnecessary stress on tire components.

For busy automotive service facilities, improved bead control can help reduce time spent on difficult tire changes and support more consistent service operations.

30-Inch Tire Changing Capacity for Versatile Wheel Service

The Ranger R980DP-L features a 30-inch tire-changing capacity, providing expanded service capability for a broad range of compatible wheel assemblies.

This larger capacity makes the machine useful for shops working with passenger cars, SUVs, pickup trucks, and light-duty vehicles equipped with a variety of wheel sizes.

Combined with its dual-assist system, the R980DP-L offers a practical solution for facilities that need both expanded wheel coverage and additional assistance with challenging tire constructions.

Space-Saving Swing-Arm Design

The R980DP-L swing-arm configuration provides a familiar and efficient tire-changing layout while helping conserve valuable shop floor space.

This design is particularly useful for independent automotive repair shops, tire service centers, and commercial garages where equipment placement and available working space are important considerations.

By combining a traditional swing-arm layout with advanced dual-assist functionality, the R980DP-L delivers professional tire-changing capability in a practical shop-friendly configuration.

Ranger DST2420X Dynamic Wheel Balancer

The Ranger DST2420X Dynamic Wheel Balancer complements the R980DP-L tire changer by providing professional digital wheel balancing for everyday automotive service.

Featuring Ranger Digital Sensor Technology, a 16-digit digital signal processor, and multi-directional quartz piezoelectric load sensors, the DST2420X is designed to deliver accurate, repeatable wheel imbalance measurements.

After mounting a tire with the R980DP-L, technicians can transfer the completed wheel assembly to the DST2420X for balancing. Its multiple balancing modes, automatic braking, and fast six-second balancing cycles help streamline the correction process.

For automotive repair shops seeking dependable digital balancing without the complexity of premium automated systems, the DST2420X provides an excellent combination of accuracy, efficiency, and value.

Ranger Digital Sensor Technology for Precise Balancing

The DST2420X features Ranger Digital Sensor Technology, which uses advanced electronic measurement components to detect wheel imbalance during balancing operations.

A 16-digit digital signal processor works with multi-directional quartz piezoelectric load sensors to process balancing measurements and support accurate correction.

This technology helps technicians identify weight imbalances and determine appropriate balancing weight placement, supporting repeatable results during everyday wheel service.

For professional tire service departments, dependable measurement accuracy helps maintain consistent balancing performance across a variety of compatible wheel assemblies.

Dynamic, Static & Performance Alloy Balancing Modes

The Ranger DST2420X offers multiple balancing settings designed to accommodate different wheel constructions and service requirements.

• Dynamic Balancing: Measures imbalance across the wheel assembly to support accurate two-plane weight correction.
• Static Balancing: Provides single-plane balancing for compatible wheel applications.
• Performance Alloy Balancing: Supports balancing configurations commonly used with compatible alloy and performance wheels.

These selectable balancing modes provide technicians with greater flexibility when servicing passenger cars, SUVs, pickup trucks, and compatible light-duty vehicles.

Fast Six-Second Balancing Cycles

The DST2420X features six-second balancing cycles designed to help technicians complete wheel imbalance measurements quickly and efficiently.

Fast cycle times are particularly valuable for busy tire shops and automotive service departments performing multiple tire replacements throughout the day.

By reducing the time required for balancing measurements, the DST2420X helps maintain an efficient workflow between tire mounting, weight correction, and final wheel installation.

Low-RPM Operation & Automatic Braking

The Ranger DST2420X incorporates low-RPM balancing operation and automatic braking to support efficient wheel measurement and positioning.

Low-RPM operation allows the balancer to perform measurements at controlled rotational speeds, while automatic braking helps bring the wheel to a stop following the balancing cycle.

These features help simplify the balancing process and reduce unnecessary handling between measurements and weight correction.

Top-Dead-Center Indicators for Weight Placement

The DST2420X top-dead-center indicators help technicians locate the appropriate rotational position for balancing weight correction.

Clear positioning guidance supports a more efficient correction process by helping operators identify where balancing weights should be applied.

Combined with the balancer's digital measurement system and automatic braking, these indicators help create a straightforward and repeatable balancing workflow.

Included Tape Wheel Weight Rolls

This Ranger tire changer and wheel balancer combo includes tape wheel weight rolls to support common wheel balancing applications.

Adhesive tape weights provide a convenient solution for compatible wheel assemblies where stick-on weight placement is preferred.

Including these balancing supplies with the equipment package helps shops establish a functional wheel service workstation without sourcing all initial balancing weight materials separately.

Efficient Tire Changing & Wheel Balancing Workflow

The Ranger R980DP-L and DST2420X Combo provides a coordinated equipment setup designed around the professional tire service process.

• Step 1: Prepare the wheel assembly for tire removal using the R980DP-L tire changer.
• Step 2: Use the dual-assist system to help control difficult tire beads during mounting and demounting.
• Step 3: Mount the replacement tire using the R980DP-L and its assist features as needed.
• Step 4: Transfer the completed wheel assembly to the DST2420X dynamic wheel balancer.
• Step 5: Select the appropriate balancing mode and measure wheel imbalance.
• Step 6: Apply the appropriate balancing weights and verify the correction before returning the wheel assembly to service.

This coordinated workflow helps technicians complete tire replacement and wheel balancing operations efficiently while maintaining professional service standards.

Advanced Tire-Changing Capability with Dependable Digital Balancing

The R980DP-L and DST2420X package is designed for shops that want additional tire-changing assistance for demanding tire assemblies while maintaining a fast, accurate, and straightforward balancing setup.

The R980DP-L provides dual-assist functionality for low-profile, run-flat, and stiff-sidewall tires, while the DST2420X delivers advanced digital measurement, multiple balancing modes, and six-second balancing cycles.

For general repair shops, performance-focused garages, and tire service departments that regularly encounter challenging tire assemblies, this combination offers a strong balance of professional capability, productivity, and equipment value.

Ranger R980DP-L & DST2420X Combo Specifications

• Manufacturer: Ranger
• Package Type: Tire Changer and Wheel Balancer Combo
• Tire Changer Model: R980DP-L
• Tire Changer Voltage: 110V
• Tire Changer Design: Swing-Arm
• Tire Changer Capacity: 30"
• Tire Changer Assist System: Dual Assist
• Wheel Balancer Model: DST2420X
• Wheel Balancer Type: Dynamic Digital Wheel Balancer
• Balancing Technology: Ranger Digital Sensor Technology
• Signal Processor: 16-Digit Digital Signal Processor
• Load Sensors: Multi-Directional Quartz Piezoelectric
• Balancing Modes: Dynamic, Static, Performance Alloy
• Balancing Cycle Time: 6 Seconds
• Balancing Operation: Low-RPM
• Braking System: Automatic
• Weight Positioning: Top-Dead-Center Indicators
• Included Balancing Supplies: Tape Wheel Weight Rolls
• Primary Applications: Passenger Cars, SUVs, Pickup Trucks, Performance Vehicles, and Compatible Light-Duty Trucks

Ideal Applications

• Professional Automotive Repair Shops
• Tire Sales and Service Centers
• Passenger Car Tire Mounting and Demounting
• Low-Profile Performance Tire Service
• Compatible Run-Flat Tire Applications
• SUV and Pickup Truck Tire Service
• Compatible Light-Duty Truck Tire Service
• Performance and Specialty Automotive Garages
• Independent Automotive Repair Facilities
• Commercial Automotive Service Departments
• Busy Tire Replacement and Balancing Operations
• Shops Upgrading from Basic Swing-Arm Tire Changers
• Facilities Seeking a 110V Dual-Assist Tire Changer

Complete Ranger 110V Dual-Assist Tire Changer & Dynamic Wheel Balancer Package

The Ranger R980DP-L 110V Swing-Arm Tire Changer and DST2420X Dynamic Wheel Balancer Combo combines advanced tire-changing assistance, precision digital balancing, and practical shop efficiency in one convenient equipment package.

Featuring the R980DP-L 110V dual-assist tire changer with 30-inch capacity, DST2420X wheel balancer with Ranger Digital Sensor Technology, and included tape wheel weight rolls, this combo provides a dependable foundation for professional tire mounting, demounting, and balancing operations.

Whether upgrading an existing tire service department or equipping a growing automotive repair facility, this Ranger package delivers the versatility, precision, and additional tire-changing support needed to handle demanding wheel service applications.

Compatibility Note: Verify tire changer wheel diameter, wheel width, clamping range, tire dimensions, and wheel balancer capacity against the manufacturer's published specifications before purchase. Confirm the R980DP-L 110V electrical circuit requirements, compressed air supply, installation clearances, and the DST2420X wheel balancer's separate electrical requirements. Run-flat and specialty tire assemblies may require additional accessories or specialized service procedures.

RANGER DST2420X Wheel Balancer

Supersedes DST2420 & DST-1200

Extreme Accuracy, Speed & Reliability

The Ranger DST2420X Wheel Balancer is engineered to deliver exceptional balancing accuracy, fast cycle times, and dependable performance for busy automotive shops. Designed to handle wheels up to 30 inches in diameter, it features Ranger's advanced Digital Sensor Technology (DST) and proven Direct-Axis drive system to achieve vibration-free wheel balancing with accuracy down to hundredths of an ounce. Whether you're servicing standard passenger vehicles or performance wheels, the DST2420X provides reliable results all day, every day.

Automatic wheel measurement, bright LED weight placement indicators, and multiple balancing modes allow technicians to complete accurate wheel balancing in as little as six seconds. Dynamic, Static, and Performance Alloy programs make balancing OEM and aftermarket wheels quick, simple, and precise.

Advanced Digital Sensor Technology

Equipped with a 16-digit digital signal processor and advanced single-chip electronics, the DST2420X delivers exceptional speed, accuracy, and repeatability. The integrated architecture reduces latency, improves processing performance, minimizes power consumption, and enhances long-term reliability while providing precise measurements for today's sophisticated wheel designs.

Multi-Directional Quartz Load Sensors

Dual quartz piezoelectric load sensors and a digital rotation encoder accurately detect longitudinal, lateral, and shear forces for superior imbalance detection. The high-rigidity quartz sensors offer outstanding sensitivity, stability, and fatigue resistance, providing virtually unlimited service life and consistent balancing performance.

Fast & Easy Wheel Mounting

The included multi-size center collets and rubber-protected Quick-Nut bell adapter make mounting wheels fast, secure, and safe while helping prevent costly wheel damage during setup.

Complete Mounting Collet Package

The DST2420X includes a comprehensive collet package for passenger vehicles, light trucks, and medium-duty truck wheels. Included are three automotive/light truck collets covering 1.75"–4.25" center bores and one heavy-duty truck collet for 4.50"–5.00" center bores.

Convenient Tape Weight Storage

A redesigned open-top side shelf keeps Ranger Quick-Peel™ adhesive wheel weights organized and within easy reach, helping improve technician efficiency during balancing operations.

Automatic Weight Optimization

Automatic weight optimization calculates the minimum amount of balancing weight required for each wheel assembly, reducing wheel weight consumption while maintaining maximum balancing accuracy and lowering operating costs.

Simple, User-Friendly Controls

An intuitive touch-pad control panel with easy-to-read graphics guides technicians through every balancing procedure. Clearly labeled function keys and a bright display make operation simple for both experienced and first-time users.

Bright LED Weight Placement Guidance

High-visibility LED indicators accurately guide technicians to the proper weight placement position as the wheel is rotated. Tiered indicators simplify split-weight and behind-the-spoke balancing techniques for precise hidden weight placement and consistently vibration-free results.

Included Wheel Weight Starter Kit

Each Ranger DST2420X includes a complimentary wheel weight starter kit containing 100 silver adhesive steel tape weights, 100 black adhesive steel tape weights, and a starter assortment of clip-on steel wheel weights, allowing technicians to begin balancing immediately.

This starter kit provides immediate value and lets you begin balancing right out of the box without additional weight purchases.

See the DST2420X in Action