US Dollars
Apex
Apex AR-450-58-TR 48" Lightweight Foam Trailer Ramp Kit w/5" Height
Write a Reviews
Apex
Apex AR-450-58-TR 48" Lightweight Foam Trailer Ramp Kit w/5" Height
Apex AR-450-58-TR 48" Lightweight Foam Trailer Ramp Kit w/5” Height
The APEX 48" Lightweight Foam Trailer Ramp Kit is designed for low-clearance vehicles that need additional lift and a smoother loading angle. Each 48-inch ramp raises the trailer interface by 5 inches and reduces the approach angle to just 5.9 degrees, helping splitters, front lips, and long overhangs clear the trailer without scraping. A solid high-density EPS foam core provides dependable strength while remaining lightweight and easy to handle, and the rugged polyurea coating resists abrasion, chemicals, and everyday wear. A reinforced UHMW insert embedded at the shelf interface helps prevent compression and deformation where the ramp contacts the trailer, creating a compact, durable loading solution with consistent approach geometry every time.
The 48" Trailer Ramp for Low Cars That Actually Works
If you're tired of stacking lumber under your trailer door, guessing at approach angles, and cringing every time a low car starts climbing aboard, the APEX 48" Lightweight Foam Trailer Ramp Kit is the solution you've been looking for. Designed specifically for low-clearance vehicles, each ramp extends the trailer entry point, raises the trailer interface by 5 inches, and reduces the approach angle to just 5.9 degrees. The result is a smooth, controlled transition that helps sports cars, track builds, lowered muscle cars, and exotic vehicles load safely without scraping splitters, front lips, or long overhangs.
Unlike makeshift wood blocks or generic loading ramps, APEX trailer ramps are engineered for long-term durability. A reinforced UHMW insert is embedded into the trailer shelf interface, strengthening the area where most foam ramps eventually fail. This reinforcement helps prevent compression and deformation over thousands of loading cycles, ensuring the ramp maintains its original profile and delivers the same predictable loading angle every time.
Engineered for Real Trailers and Low-Clearance Vehicles
The 48-inch length and 5-inch rise weren't chosen by accident. APEX developed this geometry around the dimensions of common enclosed and open car trailers and the low-profile vehicles that frequently use them. The gentle 5.9-degree approach angle significantly reduces the breakover point where the tire first contacts the ramp and where it transitions onto the trailer door, minimizing the risk of bumper or splitter damage.
Compared to many foam trailer ramps with similar overall dimensions, the shallower approach angle provides noticeably better clearance during slow, controlled loading, giving drivers greater confidence when loading valuable performance vehicles.
Solid High-Density EPS Foam Core
Every APEX trailer ramp is built around a solid high-density expanded polystyrene (EPS) core that delivers exceptional strength while remaining lightweight and easy to handle. Rather than using a hollow construction, the EPS is manufactured through a controlled molding process that creates a dense, structural core capable of supporting thousands of pounds.
This solid-core design distributes vehicle weight evenly throughout the ramp, reducing localized compression and creating a stable, confidence-inspiring feel during loading. With no steel framework, there are no welds to crack, no corrosion to worry about, and no unnecessary weight to move around.
Durable Polyurea Protective Coating
The EPS core is completely encapsulated in a rugged polyurea elastomer coating that chemically bonds to the foam for exceptional durability. This protective coating resists abrasion, chemicals, moisture, and UV exposure while providing a textured, non-slip surface that improves traction for both tires and trailer surfaces.
Unlike simple painted finishes, the polyurea coating maintains its grip under repeated use and helps keep the ramps securely positioned during loading, even in less-than-perfect shop or trailer conditions.
Reinforced UHMW Shelf for Maximum Durability
The highest stress point on any trailer ramp is the shelf that rests against the trailer door. To reinforce this critical area, APEX integrates a heavy-duty UHMW (Ultra-High Molecular Weight polyethylene) insert directly into the shelf interface.
This reinforcement distributes contact loads more effectively, helping prevent the shelf from crushing, rounding over, or permanently deforming over time. By maintaining the original geometry of the ramp, the UHMW insert ensures consistent loading performance trip after trip.
Higher Load Capacity Than Typical Foam Trailer Ramps
Many comparable foam trailer ramps are rated for approximately 1,500 lbs. per ramp. The APEX 48" Trailer Ramp Kit increases that rating to 1,750 lbs. per ramp (3,500 lbs. per pair) through its dense EPS core, durable polyurea coating, and reinforced UHMW shelf design.
This higher capacity provides additional confidence when loading heavier performance vehicles, wider tire combinations, and real-world front axle loads that often exceed simple static weight calculations.
Lightweight and Easy to Handle
Despite their impressive strength, the ramps remain lightweight enough for one person to carry and position with ease. Integrated thermoplastic carry handles are molded directly into the ramp body and located near the balance point for comfortable transport.
The non-marring construction won't rust, scratch coated floors, or leave marks inside enclosed trailers. Whether stored against a garage wall or secured inside your trailer, the ramps remain quiet, durable, and ready for years of dependable service.
A Better Alternative to Makeshift Loading Solutions
Scrap lumber, homemade blocks, and generic loading ramps often create inconsistent loading angles and unnecessary risk for low-clearance vehicles. The APEX 48" Lightweight Foam Trailer Ramp Kit eliminates the guesswork by providing a repeatable loading solution with a known approach angle, consistent ride height, dependable strength, and purpose-built durability.
Whether you're transporting race cars, exotic vehicles, lowered street cars, dealership inventory, or prized collector cars, these ramps help protect valuable front-end components while making every loading experience smoother, safer, and more predictable.
Who Is the APEX 48" Lightweight Foam Trailer Ramp Kit Best For?
- Track Day Drivers & Club Racers – Ideal for enthusiasts who regularly load low-clearance sports cars and race cars into enclosed or open car trailers.
- Performance Shops & Tuners – Perfect for transporting lowered vehicles equipped with front splitters, side skirts, carbon fiber aero, and other low-profile modifications.
- Dealerships, Collectors & Vehicle Transporters – Helps protect valuable inventory by providing a smoother, lower-angle loading solution that reduces the risk of scraping.
- Owners of Lowered Street Cars & Exotics – A reliable alternative to wood planks, blocks, and makeshift ramps for loading performance vehicles with confidence.
- Anyone Wanting a Professional Trailer Loading Solution – Designed for users seeking a lightweight, durable, and purpose-built foam trailer ramp that outperforms traditional loading methods while making vehicle loading safer and easier.
Looking for full specifications and features?
Check out the Product Specifications and Product Features tabs above for complete specs, dimensions, and detailed feature breakdowns.
California Residents:
WARNING: Proposition 65 requires warnings on products that contain certain chemicals that the State of California has determined may cause cancer and/or birth defects or other reproductive harm, if those products expose consumers to such chemicals above certain threshold levels that are designed to protect public health. For more information go to www.P65Warnings.ca.gov
Warranty
- To View Apex Warranty Information Click Here