|
|
|
|
BendPak LR10000 Low-Rise ALI Lift 10,000 Capacity
To View or download the lift inspection guide
Click Here.
Work Faster with the Top-Selling LR-10000 Low-Rise Lift
When you need to get wheel service done quickly, there’s no substitute for the LR-10000. This amazingly efficient low-rise lift holds up to 10,000 lbs. It’s perfect for trucks and SUVs that many other lifts can’t handle.
Lug nuts and other small parts are always within reach with the convenient built-in storage trays. A small footprint, easy installation and adaptable 110V/220V power-unit make the LR-10000 the perfect lift that fits any shop. The lift platform and auxiliary adapters allow lifting of most unibody and frame contact undercarriages at recommended manufacturer pick-up points on most vehicles.
Be sure to compare your vehicle specifications, including ground clearance and overall height with the specification shown before you purchase.
Low-profile height
A low 4" collapsed height accommodates most vehicles, including sports cars, race cars and larger trucks/SUVs. The minimal garage footprint means you can collapse your car lift without it getting in your way. This is perfect for home garages that want to reduce clutter in a tight space.
Single-point safety release
The single-point safety release and dead-man style operation controls make this lift easy to operate and safe to use. The release during descent is instantaneous, smooth and perfectly level.
Dropped crossbar
A specially formed crossbar is dropped in the center, providing added vehicle drive-over clearance. Now suspension work, oil changes, wheel and brake service and detailing are easier than ever.
Rugged steel channel frame
If you're going to do heavy lifting, you need a solid base. BendPak steel is manufactured under the strictest industry standards. The same warranty that applies to our larger lifts applies to our low-rise lifts.
Industrial-grade hydraulic cylinder
A durable, leak-proof hydraulic cylinder with flow divider ensures even ascents and descents with every use. This is the same cylinder technology that supports all BendPak lift designs. In our minds, low-rise lifts deserve the same rugged equipment as any other car lift, so we treat them that way.
Solid rubber lift blocks
Others charge extra for these necessary adapters, but they're standard with every low-rise lift purchase you make. There’s no point in having you open your car lift installed without all the pieces needed to operate it, is there? Only use BendPak’s durable treaded rubber lift blocks when operating our low-rise lifts. They’re more supportive and longer-lasting than many competing lift blocks. In fact, some companies use dinky rubber padding on their low-rise lifts, which rips and tears during use. Hardly a good idea.
Specifications
|
LR-10000
|
Capacity
|
Lifting Capacity
|
10,000 lbs. / 2,724 kg
|
Max Capacity / Front Axle
|
5,000 lbs. (2,273 kg)
|
Max Capacity / Rear Axle
|
5,000 lbs. (2,273 kg)
|
Rise
|
Lifting Height
|
23" (584 mm)
|
Lifting Height w/Blocks
|
32” (813 mm)
|
Locking Heights
|
Fully Lowered
|
4.5" (114 mm)
|
1st Lock Position
|
14" (356 mm)
|
2nd Lock Position
|
18" (457 mm)
|
3rd Lock Position
|
20.75" (527 mm)
|
4th Lock Position
|
22.75” (578 mm)
|
Full Rise
|
23" (584 mm)
|
Outside Dimensions
|
Overall Length
|
82.65" (2,094 mm)
|
Overall Pad Length
|
53” (1,346 mm)
|
Overall Width
|
85" (2,159 mm)
|
Overall Pad Width
|
24" (610 mm)
|
Lowered Height
|
4.5" (114 mm)
|
Power Unit
|
Motor
|
110 VAC / 50/60 Hz / 1 Ph
|
Lifting Time
|
35 Seconds
|
Shipping
|
Shipping Weight
|
1,332-lbs. (604 kg)
|
Shipping Dimensions
|
88" x 85" x 24 (2,235 mm x 2,159 mm x 609 mm)
|
Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition) or ANSI/UL 201. Consult
www.autolift.org for a complete list.
LOW-RISE/MID-RISE LIFTS WARRANTY
Duration: From the date of purchase by the original Purchaser or 12-24 months from the date of shipment by BendPak or whichever comes first.
- Two Years (24-Months) Warranty on the lift structure
- One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Labor Warranty on site or at factory
- One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any BendPak Full-Rise Scissor Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by overloading lift beyond rated capacity
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber pads, pad adapters, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote
addresses.
**For all BendPak brand Low-Rise and Mid-Rise Surface Mounted Vehicle Service Lifts (excluding specialty lifts, high rise, commercial
parking, material handling, or models for particular purpose) manufactured on or following 7/27/2012.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered
damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other
than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger
under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under
these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic
consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular
purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify
these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on
www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
|
|
|
|
|
|
|
|
|
|
|
Features
- Each lift platform features four parallelogram frame support bars making it the strongest 10,000-pound low-rise lift in its class
- Drive-over ramps and side rails provide an increased width to support wider vehicles during approach
- Comes standard with a durable full length rubber-topped lifting platform and eight multi-height rubber topped adapters for increased vehicle contact versatility
- Storage trays are conveniently placed on each side of the lift platform to prevent wheel lug nuts and other small parts from being misplaced
- Dual hydraulic cylinders provide a stable 10,000-pound lifting capacity to accommodate a wide range of vehicles
- Diamond plated approach ramps help to prevent slipping
- Thee locking positions allow technicians to work at different working heights to increase productivity and minimize fatigue
- Powder coat finish provides a long lasting durable finish
- Included with every lift are detailed installation and maintenance instructions, graphic safety decals, maintenance decals, vehicle lifting point guide and a safety instruction placard to train personnel on proper safety procedures and maintenance guidelines
|
|
|
|
|
|
Accessories for this product... |
|
|
|