 |
 |
 |
|
Challenger 4115XFO Ex-Length Open Front Flat Deck ALI 4 Post Lift 15,000 lbs
Supersedes 4015XFO
To view the lift inspection guide
Click Here.
Designed with productivity and safety in mind, our newly improved 15,000 lb 4-Post Lift would be a great addition to any shop floor. With several configurations available, you’re sure to find the lift to meet your needs.
Increase your customer base with this lift as it can accommodate and service a wide range of vehicles. Anything from a small passenger car to a medium-duty truck, and even medium-sized vans. This 4115 Series lift features an improved design with all-new and wider 22” runways, open and closed front design for better ergonomics with easy access to adjustment points, improved 4-wheel alignment wheelbase for extended alignment capabilities, louvered approach ramps, and an all enclosed front column and crossbeam design.
|
Model
|
4115EFO
|
4115XFO
|
4115EFX
|
4115XFX
|
|
Open or Closed Front
|
Open
|
Open
|
Closed
|
Closed
|
|
Lift Capacity
|
15,000 lbs.
|
|
A Overall Length
|
250.75"
|
277"
|
247.625"
|
275.5"
|
|
B Overall Width
|
142"
|
|
C Inside of Columns
|
Front: 120.75” / Rear: 125.5
|
125.5"
|
|
D Between Columns
|
195"
|
222.5"
|
196"
|
223.375"
|
|
E Height of Columns
|
Front: 99.25” / Rear: 98"
|
98"
|
|
F Height of Runways
|
|
|
G Width of Runways
|
22.375”
|
|
H Width Between Runways
|
40.625”
|
|
I Maximum Wheelbase1
|
183"
|
210.5"
|
183"
|
210.5"
|
|
J Rise Height
|
78"
|
|
Max. 2 Wheel Alignment
|
N/A
|
|
Max. 4 Wheel Alignment
|
N/A
|
|
Air Supply Required
|
90 -120 psi
|
|
Motor/Voltage
2
|
2HP, 208v-230v, 60Hz, 1Ph
|
|
Speed of Rise
|
85 seconds
|
|
Min. Recomm. Bay Size
|
14' x 24'
|
14' x 26'
|
14' x 24'
|
14' x 26'
|
1 Maximum wheelbase is based on a tire diameter of 30"
2 Optional Three Phase Electrical Power Available. Please Specify at time of order.
Standard Colors are Red, Blue or Black. Optional Colors Available.
Click on Image to Download or Enlarge It
LIMITED WARRANTY
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those
parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts
for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s
specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void
your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product
has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation,
abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when
repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular
purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is
authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages
for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky,
and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units,
cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and
include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE. WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @
www.challengerlifts.com/register-your-lift
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- All-new and wider 22” runways.
- Open and closed front design for better ergonomics, allowing easy access to adjustment points on both standard or long length runway racks.
- Improved 4-wheel alignment wheelbase for extended alignment capabilities allowing you to service both long and short wheelbase vehicles.
- Louvered approach ramps prevent wheel-spin and are more effective than diamond tread or abrasive strips.
- Keep your shop looking stylish & clean with our new and improved all enclosed front column and crossbeam design. Expect a longer and smoother operational life with our UHMW internally encapsulated slide block.
- Compatible with the industry’s latest imaging alignment systems.
- 17 locking positions with improved lock design.
Optional AR4115XAO Alignment Rack Package Includes
2) 9,000lb Rolling Jack, Flush Mount SS Turning Radius Gauges, Internal Airline Kit, Rear Slip Plates, Multi-Position Work-Steps & Automatic Wheel Stops
- Recessed stainless steel turning radius gauges provide accurate readings
- 80" rear recessed free floating slip plates offer a wider range of 4 wheel alignment capabilities
RJ7.5 7,500lb Rolling Jack
7,500 lb. capacity Rolling Jack for 4115series four post automotive lifts features air/hydraulic operation and includes (4) 3" stack adapters. Broaden your service revenue with easy access to brakes and wheels from underneath four post lifts. 7,500 lb. capacity rolling jacks features adjustable width, low vehicle drive-over clearance, stackable height extensions with built-in storage rack and factory installed and protected filter lubricator and regular.
Flush Mount Stainless Steel Turning Radius Gauges
Stainless Steel turning radius gauges for 4P12series, 44018AR and 4115series four post car and truck lifts. Turning radius gauges are used for front wheel alignments to measure how many degrees the front wheels are turned left or right. They are commonly used when measuring caster, camber and toe-out on turns for alignment capable automotive lifts. General service four post automotive lifts can be turned into alignment capable four post lifts with a bolt on alignment kit (Part #40200-3DSS) which includes stainless steel turning radius gauges.
40230E Internal Airline Kit
Internal air line kit for dual rolling jack operation on 15,000 lb. capacity four post automotive lifts. Internal airline kit, #40230E provides air for dual rolling jack on the 4115series standard length four post lifts. #40230X provides air for dual rolling jack operation on the 4115series extended length four post lifts.
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
