BendPak Car Lifts

BendPak LR-60 6K Low-Rise Car Lift

You haven't experienced state-of-the-art compact lifting convenience until you've used the BendPak LR-60. This 6,000-lb. capable lift comes loaded with an electric / hydraulic power system, multi-position safety locks, rubber lifting blocks, a dropped crossbar for added clearance and a heavy-duty steel channel frame. One of the best Specialty Car Lifts on the market!

• Capacity: 6,000 lbs
• Overall Width: 70-1/2"
• Overall Length: 82"
• Max Lifting Height w/o Blocks: 26"
• Max Lifting Height w/1-1/2" Blocks: 27-1/2"
• Lowered Height: 4"
• Power Requirements: 100V - 220 VAC / 60 Hz. / 1 Ph.

: $2,695.00
New Gray Color!

BendPak LR-60P 6K Low-Rise Portable Car Lift

You haven't experienced state-of-the-art portable lifting convenience until you've used the BendPak LR-60P. This 6,000-lb. capable lift comes loaded with an electric / hydraulic power system, multi-position safety locks, rubber lifting blocks, a dropped crossbar for added clearance and a heavy-duty steel channel frame. One of the best BendPak Portable Car Lifts on the market today!

• Capacity: 6,000 lbs
• Overall Width: 70-1/2"
• Overall Length: 82"
• Max Lifting Height W/O Blocks: 26"
• Max Lifting Height w/1-1/2" Blocks: 27-1/2"
• Lowered Height: 4"
• Power Requirements: 100V - 220 VAC / 60 Hz. / 1 Ph.

: $2,695.00
New Gray Color!

BendPak MD-6XP 6K Mid-Rise Portable Frame Lift

You haven’t experienced state-of-the-art portable lifting convenience until you’ve used the BendPak MD-6XP mid-rise scissor lift. This 6,000-lb. capable automotive lift comes loaded with adjustable arm assemblies, a safety lock bar with multiple lock positions and a free set of truck adapters.

• Capacity: 6,000 lbs
• Max Lifting Height w/o Adapters: 47"
• Lowered Height: 4.75"
• Power Requirements: 110 VAC / 50/60 Hz. 1Ph

: $2,995.00
New Gray Color!

BendPak LR10000 Low-Rise ALI Lift

BendPak’s 10,000-lb. capacity LR-10000 low-rise lift is your solution for quick service and increased productivity when servicing today’s passenger cars and light trucks. From tire and brake service to vehicle detailing and body repair, a wide variety of vehicles will fit.

• Capacity: 10,000 lbs
• Overall Length: 82.65"
• Overall Width: 85"
• Lifting Height w/Blocks: 32"
• Lowered Height: 4"
• Power Requirements: 110 VAC / 50/60 Hz / 1 Ph

: $4,695.00
New Gray Color!

BendPak 10APS-168 Symmetric Ex-Tall 2 Post Car Lift

BendPak’s all-new AP series of two-post lifts are a revolutionary design that factors the best qualities of today’s two-post lift types into a completely new concept in car lift engineering.

• Capacity: 10,000 lbs
• Overall Height: 168"
• Overall Width: 139" or 147"
• Max Lifting Height: 80.5”
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,895.00

Sale Price: $4,699.00
Available While Supplies Last!

BendPak HD-9ST 9K Narrow Width Service/Parking 4 Post Lift

The BendPak HD-9ST space-saver four post lift is a rugged, standard-height, space-saver solution with a 9,000-lb. lifting capacity. Perfect for vehicle storage and service -at the shop or in the garage.

• Capacity: 9,000 lbs
• Column Height: 88"
• Overall Length: 200"
• Overall Width: 100.25"
• Width Between Columns: 89-3/4"
• Max Lifting Height: 74-1/2"
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,095.00
New Gray Color!

BendPak GrandPrix™ GP-7LCS Narrow Bays & Low Ceilings Lift

The GP-7LCS is a truly one-of-a-kind design. Because it fits in garages with ceilings as low as 9', it boasts the lowest columns ever found on a permanent two-post lift. It can be installed in virtually every garage on the planet and still offers an impressive 58" rise.

• Capacity: 7,000 lbs
• Overall Height: 106.5"
• Overall Width: 125"
• Min/Max Lifting Height: 54" - 66" (+ Pad + Adapter)
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,095.00
New Gray Color!

BendPak GrandPrix™ GP-7LC Narrow Bays & Low Ceilings Lift

The GP-7LC is a shortened version of the standard GP-7, accommodating ceilings as low as 10' while offering an impressive 68" max rise. This model is truly designed for homeowners who until now could never fit a two-post lift in their garage.

• Capacity: 7,000 lbs
• Overall Height: 118.5"
• Overall Width: 125"
• Min/Max Lifting Height: 64" - 76" (+ Pad + Adapter)
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,195.00
New Gray Color!

BendPak HD-9 Service/Parking 4 Post Lift

The HD-9 is your rugged, 9,000-lb. lifting solution. Perfect for vehicle storage and service-at the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you.

• Capacity: 9,000 lbs
• Column Height: 88"
• Overall Length: 200"
• Overall Width: 110-1/4"
• Width Between Columns: 100-1/4"
• Max Lifting Height: 74-1/2"
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,295.00
New Gray Color!

BendPak HD-7P 7K Short Runways Ex-Tall Service/Parking 4 Post Lift

Shorter length and extra height, the HD-7P is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space.

• Capacity: 7,000 lbs
• Column Height: 100"
• Overall Length: 200"
• Overall Width: 99-3/4"
• Width Between Columns: 89-3/4"
• Max Lifting Height: 86-1/2"
• Power Unit: 208-230 VAC / 50-60 Hz. / 1Ph

: $5,395.00
New Gray Color!

BendPak HD-9XL 9K Ex-Wide Service/Parking 4 Post Lift

The HD-9XL is your 9,000-lb. rugged lifting solution if you need lift a car or truck with a wider and / or longer wheel base. Perfect for vehicle storage and service - at the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you. This model is available with optional casters, dip-trays, jack platform and more.

• Capacity: 9,000 lbs
• Column Height: 88"
• Overall Length: 224"
• Overall Width: 110-1/4"
• Width Between Columns: 100-1/4"
• Max Lifting Height: 74-1/2"
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,395.00
New Gray Color!

BendPak HD-9STX 9K Narrow Width Service/Parking 4 Post Lift

The HD-9STX is your 9,000-lb. rugged lifting solution if you need get something heavy up high, but you don't have a lot of space on the ground to lift it with. Perfect for vehicle storage and service at the shop or in the garage.

• Capacity: 9,000 lbs
• Column Height: 100"
• Overall Length: 224"
• Overall Width: 100.25"
• Width Between Columns: 89-3/4"
• Max Lifting Height: 86-1/2"
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,395.00
New Gray Color!

BendPak HD-7W 7K Short Runways Ex-Wide, Ex-Tall Service/Parking 4 Post Lift

Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.

• Capacity: 7,000 lbs
• Column Height: 100"
• Overall Length: 200"
• Overall Width: 110-1/4"
• Width Between Columns: 100-1/4"
• Max Lifting Height: 86-1/2"
• Power Unit: 208-230 VAC / 50-60 Hz. / 1Ph

: $5,495.00
New Gray Color!

BendPak XPR-9TF Floorplate 2 Post Lift

The XPR-9TF two-post lift offers automotive service professionals superior lifting performance as well as lasting quality. Featuring an intuitive design and state-of-the-art technology, this 9,000 lb. capacity lift makes the perfect addition to any shop.

• Capacity: 9,000 lbs
• Overall Height: 123"
• Overall Width: 132" or 145"
• Max Lifting Height: 72.75" w/Pad
• Power Unit: 220V

: $5,495.00
New Gray Color!

BendPak GrandPrix™ Standard Height Lift

Our standard-height GP-7 is fit for garages with 13' ceilings and offers a full 78" max rise. These dimensions are similar to other two-post lifts, but the GP-7 offers a much slimmer profile than other lifts. This makes it ideal for narrow garages looking to fit more lifts in limited space.

• Capacity: 7,000 lbs
• Overall Height: 150"
• Overall Width: 125"
• Min/Max Lifting Height: 74.5" - 86.5" (+ Pad + Adapter)
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,695.00
New Gray Color!

BendPak 10AP Adaptable Clearfloor 2 Post Car Lift

The 10AP two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting

• Capacity: 10,000 lbs
• Overall Height: 145"
• Overall Width: 135" or 145"
• Max Lifting Height: 82.5"
• Power Unit: 220VAC / 60Hz / Single Phase

: $5,795.00
New Gray Color!

BendPak P-9000LTF Low-Rise, Open-Center Pit-Style, Flush Mount ALI Lift

The P-9000LTF is one of the industry's highest-capacity low-rise scissor lifts. It offers a flush-mounted and open-center design, so you can lift heavy-duty equipment without taking up an inch of vertical space in your shop when the lift is not in use.

• Capacity: 9,000 lbs
• Overall Platform Width: 24"
• Overall Length: 74.4"
• Lifting Height: 23.3"
• Max Lifting Height w/Blocks: 26.3"
• Lowered Height: 3.15"
• Power Requirements: 1.5hp/ 208-230 VAC / 60 Hz. / 1 Ph.

: $5,895.00
New Gray Color!

BendPak P9000LT Low-Rise Pit-Style Lift

Expand your service capabilities with a 9,000-lb. capacity pit-style, open-center, low-rise lift. With a dual-approach design, and an electric-hydraulic power system with a hands-free safety system, BendPak pit-style lifts represent optimum convenience and versatility for any garage or lube shop.

• Capacity: 9,000 lbs
• Overall Platform Width: 24"
• Overall Length: 124.6"
• Lifting Height w/Less Blocks: 23.3"
• Max Lifting Height w/3" Blocks: 26.3"
• Lowered Height: 3.15"
• Power Requirements: 1.5hp/ 208-230 VAC / 60 Hz. / 1 Ph.

: $5,995.00
New Gray Color!

BendPak 10APX Adaptable Clearfloor High-Rise 2 Post Car Lift

The next generation of two-post lifts - now with an increased height! The 10AP Series is built with the future in mind, and has all the features you'll need to service vehicles as effectively as possible. This revolutionary lift can handle Electric Vehicles effortlessly and can adapt to both symmetrical and asymmetrical configurations.

• Capacity: 10,000 lbs
• Overall Height: 157"
• Overall Width: 135" or 145"
• Max Lifting Height: 89"
• Power Unit: 220VAC / 60Hz / Single Phase

: $6,095.00
New Gray Color!

BendPak MDS-6EXT Open Center Mid-Rise Extended Platform Scissor Lift

You haven’t experienced state-of-the-art portable lifting convenience until you’ve used a BendPak mid-rise scissor lift. This family of 6,000-lb. capacity mid-rise lifts comes loaded with adjustable arm assemblies, safety lock bars with multiple lock positions and a free set of truck adapters. Let our family of mid-rise car lifts take your service capabilities to new heights.

• Capacity: 6,000 lbs
• Overall Width: Adjustable
• Overall Height: 104.3"
• Lifting Height w/Blocks: 38.25"
• Lifting Height w/o Blocks: 36.75"
• Power Requirements: 208-230 VAC / 60 Hz / 1 Ph

: $6,195.00
New Gray Color

BendPak 10AP-168 Adaptable Clearfloor Ex-Tall 2 Post Car Lift

The 10AP two-post lift offers exceptional direct-drive lifting performance. This industrial-strength car lift guarantees cutting-edge technology, top of the line materials, a design that's ahead of its time and a 10,000-lb. lifting

• Capacity: 10,000 lbs
• Overall Height: 168"
• Overall Width: 135" or 145"
• Max Lifting Height: 82.5"
• Power Unit: 220VAC / 60Hz / Single Phase

: $6,195.00
New Gray Color!

BendPak MDS-6KLPF Open Center Mid-Rise Scissor Flush Mount Lift

With nearly 45" of rise from the flush-mounted position, the MDS-6LPF is a world-class performer in the mid-rise lift class. There's no better way to get this much power and height from a fully collapsed, zero-footprint design.

• Capacity: 6,000 lbs
• Overall Width: 19"
• Overall Length: 66"
• Max Lifting Height w/Blocks: 41"
• Max Lifting Height w/o Blocks: 39"
• Power Requirements: 110 - 220 VAC / 60 Hz / 1 Ph

: $6,395.00
New Gray Color!

BendPak MDS-6LP Open Center Mid-Rise Scissors Lift

This fully open-center design, both top and bottom, makes the MDS-6K a clear leader in convenience and work productivity.

• Capacity: 6,000 lbs
• Overall Width: 19"
• Overall Length: 91.5"
• Max Lifting Height w/Blocks: 44.5"
• Max Lifting Height w/o Blocks: 42.5"
• Power Requirements: 110 - 220 VAC / 60 Hz / 1 Ph

: $6,495.00
New Gray Color!

BendPak 10APX-168 Adaptable Clearfloor Ex-Tall 2 Post Car Lift

The next generation of two-post lifts - now with an increased height! The 10AP Series is built with the future in mind, and has all the features you'll need to service vehicles as effectively as possible. This revolutionary lift can handle Electric Vehicles effortlessly and can adapt to both symmetrical and asymmetrical configurations.

• Capacity: 10,000 lbs
• Overall Height: 181"
• Overall Width: 135" or 145"
• Max Lifting Height: 89"
• Power Unit: 220VAC / 60Hz / Single Phase

: $6,495.00
New Gray Color!

BendPak HD-7500BLX Extra Long Boat Storage Garage Lift

Avoid rust, blemishes, rot, weather damage and more with BendPak's longer, extended-height HD-7500BLX boat lift. It's the safest, most cost-effective way to dry dock your boat.

• Capacity: 7,500 lbs
• Height of Columns: 100"
• Overall Length: 224"
• Overall Width: 132"
• Width Between Columns: 122"
• Max. Lifting Height: 87"
• Power Unit: 220VAC / 60Hz / Single Phase

: $7,395.00
New Gray Color

BendPak PL-6000DC Parking Lift / Shared Columns 6,000 lbs

The PL-6000DC is a two-post parking lift with car storage capacity of up to 6,000-pounds. This parking lift is designed to be ganged together with shared columns allowing you to fit more units into a smaller space. Can be installed in either indoor or outdoor locations.

• Capacity: 6,000 lbs
• Overall Length: 148.25”
• Overall Width: 100.25”
• Usable Platform Width: 82.5"
• Power Unit: 220-420V / 50/60Hz / 1Ph

: $7,495.00

BendPak HD-75BXT Ex-Length Boat Storage Garage Lift

The HD-75BXT is the perfect dry-docking solution. Keep your boat in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-75BXT pulls double-duty as a professional-grade car lift for vehicles.

• Capacity: 7,500 lbs
• Height of Columns: 100"
• Overall Length: 248.5"
• Overall Width: 132.2"
• Width Between Columns: 122.25"
• Max. Lifting Height: 87"
• Power Unit: 220VAC / 60Hz / Single Phase

: $7,495.00
New Gray Color

BendPak GrandPrix™ GP-9F 4 Post Lift

The GrandPrix GP-9F is the perfect home car lift. Its slim, toughened boxed-steel columns are preferred by many for home lifting applications. Maintenance is minimal and easy to perform.

• Capacity: 9,000 lbs
• Height of Columns: 93"
• Overall Width: 113"
• Overall Length: 210"
• Power Unit: 110-VAC / 50-60 Hz / 1 Ph / 20-amp

: $7,995.00
New Gray Color!

BendPak HD-7PXW 7K Super-Tall Rise 4 Post Parking Lift

The HD-7PXW is literal giant. This 4 post lift will effortlessly lift up to 7,000 lbs. over 12' into the air! Perfect for stacking taller vehicles. The HD-7PXW is the wider model of this super tall lift.

• Capacity: 7,000 lbs
• Column Height: 158"
• Overall Length: 224 1/2"
• Overall Width: 110 1/4"
• Width Between Columns: 100"
• Max Lifting Height: 145"
• Power Unit: 208-230 VAC / 50-60Hz / Single Phase

: $8,395.00
New Gray Color

BendPak HD-9AE 9K Alignment 4 Post Lift

The HD-9AE four-post alignment lift provides 9,000-lbs. of lifting capacity to accommodate a variety of light duty trucks and automobiles.

• Capacity: 9,000 lbs
• Column Height: 88"
• Overall Length: 224"
• Overall Width: 127"
• Width Between Columns: 117"
• Max Lifting Height: 76.5"
• Power Unit: 220VAC / 60Hz / Single Phase

: $8,595.00
New Gray Color!

BendPak GrandPrix™ GP-9XLT 4 Post High Lift w/ Ex Length

The GrandPrix™ GP-9XLT is a four-post lift that's 24" longer and 12" taller than the standard-length GP-9F model. Perfect for parking high-stance and/or longer-wheelbase vehicles underneath. Specifications: GP-9XLT Package

• Capacity: 9,000 lbs
• Height of Columns: 105"
• Overall Width: 113"
• Overall Length: 234"
• Power Unit: 110-VAC / 50-60 Hz / 1 Ph / 20-amp

: $8,595.00
New Gray Color!

BendPak 2 Post Direct-Drive Lift

Looking for the direct-drive operation of the XPR-9FD, but with an even beefier lifting capacity? Then, the XPR-12FD is your car hoist. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 12,000 pound lifting capacity.

• Capacity: 12,000 lbs
• Overall Height: 144"
• Overall Width: 155"
• Max Lifting Height: 80" (w/6" Adapter)
• Power Unit: 220VAC / 60Hz / Single Phase

: $9,095.00
New Gray Color!

BendPak Triple-Telescope Arms-All Four 2 Post Lift

When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12CL, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before.

• Capacity: 12,000 lbs
• Overall Height: 170"
• Overall Width: 155"
• Max Lifting Height: 80" (6" Adapter)
• Power Unit: 220VAC / 60Hz / Single Phase

: $9,595.00
New Gray Color!

BendPak SP-7XEF Full-Rise Flush Mount Scissor Lift 7,000 lb.

This flush-mount version of our full-rise scissor lift is ideal for shops that are limited in space but have a huge demand for performance. The SP-7XEF has all the lifting height of a two-post lift without the columns that take up precious shop space. Features a 22” x 63” lift platform, hardened pivot pins, dual hydraulic cylinders and ergonomic controls.

• Capacity: 7,000 lbs
• Max Lifting Height: 70.5"
• Lowered Height: 6.5"
• Power Requirements: 208-240 VAC / 50-60 Hz / 1Ph

: $9,595.00
New Gray Color!

BendPak Ex-Tall Triple-Telescope 2 Post Lift

When you need to lift something heavy—really heavy—your best bet is always BendPak. Our super-duty models are pure brutish muscle. This XPR-12CL-192, for instance, has an astounding 12,000-lb. capacity and features heavier column construction, carriage construction and frame components than ever before.

• Capacity: 12,000 lbs
• Overall Height: 192.7"
• Overall Width: 155"
• Max Lifting Height (6" Adapter): 80"
• Power Unit: 220VAC / 60Hz / Single Phase

: $9,995.00
New Gray Color!

BendPak SP-7XE Full-Rise Frame Engaging Scissor Lift 7,000 lb.

This flush-mount version of our full-rise scissor lift is ideal for shops that are limited in space but have a huge demand for performance. The SP-7XEF has all the lifting height of a two-post lift without the columns that take up precious shop space. Features a 22” x 63” lift platform, hardened pivot pins, dual hydraulic cylinders and ergonomic controls.

• Capacity: 7,000 lbs
• Max Lifting Height: 70.5"
• Lowered Height: 6.5"
• Power Requirements: 208-240 VAC / 50-60 Hz / 1Ph

: $9,995.00
New Gray Color!

BendPak XPR-12CL-LTA 2 Post Lift w/Long-Reach Triple-Telescoping Arms

If you need to service vehicles up to 12,000 lbs. capacity with extremely long wheelbases, BendPak's XPR-12CL-LTA offers nearly 72 inches of reach, compared to 58 inches on our standard triple-telescoping arms. Ideal for hard-to-reach lift points that other two-post lifts cannot access.

Specifications: XPR-12CL-LTA

• Capacity: 12,000 lbs
• Overall Height: 170"
• Overall Width: 155"
• Max Lifting Height w/Pad & 63 mm Adapter: 80"
• Power Unit: 220 VAC / 60 Hz / 1 Ph

: $10,295.00
New Gray Color!

BendPak XPR-12CL-LTA-192 Ex-Tall 2 Post Lift w/Long-Reach Triple-Telescoping Arms

If you need to service vehicles up to 12,000 lbs. capacity with extremely long wheelbases, BendPak's XPR-12CL-LTA offers nearly 72 inches of reach, compared to 58 inches on our standard triple-telescoping arms. Ideal for hard-to-reach lift points that other two-post lifts cannot access.

Specifications: XPR-12CL-LTA-192

• Capacity: 12,000 lbs
• Overall Height: 192"
• Overall Width: 155"
• Max Lifting Height w/Pad & 63 mm Adapter: 80"
• Power Unit: 220 VAC / 60 Hz / 1 Ph

: $10,695.00
New Gray Color!

BendPak HDS-14LSX Extended Alignment 4 Post Lift

The HDSO-14LSX pulls double duty as both a legendary 14,000-lb. capacity lift and an alignment system. We’ve integrated industrial-strength slip plates and turn plates right into the runways to maximize alignment convenience.

• Capacity: 14,000 lbs
• Column Height: 95"
• Overall Length: 241"
• Overall Width: 130"
• Width Between Columns: 120"
• Max Lifting Height: 77.625"
• Power Unit: 220VAC / 60Hz / Single Phase

: $11,395.00
New Gray Color!

BendPak Autostacker™ A6S Platform Scissor Lift

The A6S is previously known as the PL-6SR. The Autostacker is the latest-model parking lift to hit the home and commercial markets. With the strength to handle loads up to 6,000 lbs. and the minimal footprint necessary for a home garage lift, the Autostacker is the perfect garage parking lift for any home or shop owner

Specifications: A6S

• Capacity: 12,000 lbs
• Overall Length: 143”
• Overall Width: 103”
• Platform Length: 124"
• Platform Width: 83.75"
• Power Unit: 208‐240V / 50/60Hz / 1Ph

: $11,395.00
New Gray Color!