 |
Dannmar DT-50A Swing Arm Tire Changer w/Assist Tower
Dannmar’s DT-50A swing-arm, tire changer is equipped with a useful power-assist tower that tackles the challenges found when replacing lower-profile performance tires with stiffer sidewalls. And with its non-tilt back design, it can be installed flush against walls. The swing-arm on the DT-50A is one of this tire changer’s most useful features. The swing-arm design lets you load tires fast, and the steel clamps are perfect for passenger cars, daily commuters, spares and many trailer tires. The tire changer’s controls are conveniently mounted upfront and logically arranged for both speed and ease-of-use. Constructed to handle the needs of crazy busy shops with its sturdy body, rigid hexagonal vertical shaft and hardened-steel horizontal outrigger support arm that eliminates flex during tire service operations. This also reduces the risk of damaging modern allow wheels.
With its non-tilt-back style, it does not require extra space to operate through. This Dannmar machine allows your technicians to keep the workflow moving and your customer’s vehicles ready on time.
High-Torque Electric Turntable
Featuring faster operating speeds and reverse-direction control for easier tire swaps, especially for low-profile and run-flat beads.
Enhanced Bead Breaker Blade
The DT-50A tire changers are manufactured with an advanced bead breaker blade. A rubber bump-stop ensures a smooth arm return, reducing shock loading.
High-Pressure Polyurethane Pneumatic Tubing
Tire changers come standard with high-pressure polyurethane pneumatic tubing that’s constructed with a smooth, seamless bore to improve flow.
Upfront Controls
Dannmar’s tire changer controls and forged-steel foot pedal levers are conveniently positioned and logically arranged for both speed and ease-of-use.
Aluminum Pneumatic Cylinders
Dannmar optimizes the stainless steel and aluminum pneumatic cylinders. Specifically, we’ve made sure internal end-of-stroke cushions come included on each cylinder, protecting the seals, wear band and piston rod.
Alloy Steel Mount & Demount Head
The equi-dimensional shape of our mount and demount head lets you change tires without changing the position of the tool head. The tool head surface is manufactured micro-smooth.
45mm Spring Assist Hexagonal Vertical Tool Shaft
A rigid 45mm spring assist hexagonal vertical tool shaft and hardened‐steel horizontal outrigger support arm keep the mount-demount tool head perfectly still during use. This reduces the chance of damaging expensive wheels due to a loose or shifting tool head. The tire changer is fitted with linear guide bearings that make it easy to adjust both vertical and horizontal wheel settings. These guide bearings are maintenance-free for the lifespan of the tire changer. The non‐flex horizontal arm boasts a hardened lower roller guide for controlled, balanced movements.
Tire Inflator Features
A pistol-type tire inflator with a sure‐grip clip‐on valve chuck has never been easier to operate and permits full-function, hands‐free operation.
Specifications
|
DT-50
|
Max Tire Diameter
|
49” (1,245 mm)
|
Internal Rim Clamping Capacity
|
14” – 26” (356 mm - 660 mm)
|
External Rim Clamping Capacity
|
12” – 24” (305 mm - 610 mm)
|
Turntable Rim Width Capacity
|
3” – 15” (76 mm – 381 mm)
|
Bead Breaker Rim Width Capacity
|
3” – 14” (76 mm – 356 mm)
|
Bead Seating System
|
Turbo Blast / Bead Seating
|
Wheel Clamping Method
|
4 Clamps - Internal / External
|
Table Clamping System
|
Dual Pneumatic Cylinders
|
Tower Design
|
Rigid Fixed / Swing Arm
|
Power Assist Tower
|
N/A (See DT-50A)
|
Noise
|
<70 dB
|
Air Requirement
|
110-175 PSI (8-10 BAR)
|
Drive System Type
|
Electric / Air
|
Motor
|
110-VAC / 50-60 Hz / 1Ph
|
The design, material and specifications are subject to change without notice.
WHEEL SERVICE EQUIPMENT WARRANTY LIMITED WARRANTY
To View or Download Dannmar's Limited Warranty Click Here
Duration: From the date of purchase by original Purchaser or 12-months months from the date of shipment by Dannmar or whichever comes first
- One Year (12‐Months) Warranty on equipment structure [*] [**]
- One Year (12‐Months) Warranty on operating components [*] [**]
- One Year (12‐Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): Dannmar, 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any Dannmar brand tire changer, wheel balancer or brake lathe**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Freight charges related to warranty performance.
- Onsite labor or factory labor associated with warranty performance.
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by using equipment beyond rated capacity and/or capability
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber or plastic pads/protectors, cutting tips, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or other component failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Dannmar product
- All electrical components are guaranteed for one year against defects in workmanship and/or materials when installed and used according to specifications
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, hasmal functioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12 months only.
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records.
- In some cases, components may be required to be shipped to the nearest Dannmar Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
- *As determined by Warrantor in its sole discretion. Equipment structure is defined as any non-moving permanently affixed frame or main body, or sub-structures that are non-moving and permanently affixed or attached to any main equipment structure or frame. **For all Dannmar brand
tire changers, wheel balancers or brake lathes manufactured on or following 6/1/2020.
Limitation of Liability
Dannmar shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of Dannmar has made any attempt to service or modify the tool prior to its return to Dannmar under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages Dannmar products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. Dannmar may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.Dannmar.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
 |