Home > Shop Presses >

Workshop Pro Press Multi-Task Machine

Pacific Automotive Industries Workshop Pro 2000

Alternative Views:

Call for Availability on This Item!
List Price: $5,500.00
: $5,371.00

Product Code: WORKSHOP-PRO-2000

Description Warranty
Pacific Automotive Industries Workshop Pro 30-Ton Multi-Task Press Machine

The Workshop Pro is a Multi-task machine. Front hub bearing removal is made simple by its unique design. By hanging the hub assembly from two adjustable perches it is easy to center and level a job under the 30 ton ram. The tool comes with popular sized pushing adaptors that attach to the ram much like a socket attaches to a ratchet. The air/hydraulic foot pump operation leaves hands free for minor adjustments. This makes a difficult job, quick, simple, and safe.

Strut assembly spring removal is also simple. Two?horse shoe mounts? one big and one small, provide a perfect mounting surface for most springs. One universal clamping mount is provided for springs not designed to fit on a horse shoe, and a two-hole mounting block is provided for the simplest mount of all. The strut mounts are designed to allow the 10 ton ram to compress even the strongest spring.

Rear axle bearing removal is quick. The Workshop Pro comes with two 3 foot long hardened rods. Two large hardened nuts are supplied with the rods. Run the rods through drilled holes in the V-blocks and threading on the nuts securely. Screw the other end of the rods into the provided bearing splitter, and the rods hold the axle assembly under the 30 ton ram, ready for dis-assembly.

The Workshop Pro has an adjustable bed. It is raised and lowered by a ratcheting hand crank. A ball valve is used to change hydraulic pressure from the 10 ton spring compressor cylinder to the 30 ton ram. Twenty Eight Accessories come standard with the Workshop Pro.

32 accessories included: ram caps, hub hangers, strut mounting plates, pusher pins, V blocks, a bearing splitter, rear axle bearing removal rods, interlocking bearing extraction tools, horseshoe bases, a steel block, bed extractor bases, and 4 pins. These are packed on a custom made pallet and boxed. In total the unit and accessories weighs just over 600 pounds.

To download the Workshop Pro Press Manual Click Here

Workshop Pro Press Brochure page 1

Workshop Pro Press Brochure page 2
  • The Workshop Pro is a Multi-Task Machine for replacing front and rear axle bearings and strut replacement
  • Adjustable Perches hang and center Hub Assemblies under a 30 ton ram to make a job quick and safe
  • Comes with 4 Interchangeable Strut Mounts for servicing struts with the 10 ton strut spring compressor
  • The Air/ Hydraulic Foot Pump leaves your hands free to center the job
  • Standard: 28 popular Accessories plus a Bearing Splitter and 2 threaded rods to service rear axle bearings

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Shop Presses