 |
 |
 |
 |
Hofmann monty™ 1620B Swing-Arm Tire Changer
The Hofmann® monty® 1620 is designed for high-volume tire shops, multi-bay repair shops and car dealerships. The monty 1620 swing-arm tire changer features 21" outer-wheel clamping standard (26" with optional adapters), and accommodates tire diameters up to 50" and a wheel width of 15". It can also be upgraded by adding Hofmann’s patented EasyMont Pro, aiding in single-operator mounting/demounting of extra-stiff, low-profile, high-performance and run-flat tires.
Bead Breaker Blade
Owing to its special shape the bead breaker blade handles rims most gently and facilitates operation considerably.
Specifications
|
monty™ 1620B
|
Maximum Wheel Diameter
|
50"
|
Maximum Wheel Width
|
15"
|
Overall Clamping Range
|
10" - 24"
|
Outside Clamping Diameter
|
10" - 21"
|
Inside Clamping Diameter
|
12" - 24"
|
Bead Breaker Range
|
2" - 18"
|
Bead Loosening Power
|
6,000 lbs
|
Tower Technology
|
Swing-Arm
|
Easymont Pro
|
Optional
|
Drive Motor
|
1 hp Electric
|
Power Requirements
|
115V / 50/60HZ / 1 Ph
|
Dimensions
|
72" L x 68" W x 85" H
|
Weight
|
600 lbs.
|
- Labor: 6 Months
- Parts: 1 Year
- Consumables: 90 Days
- Electronic Circuit Boards: 1 Year
- Electric Motor: 3 Year
- Transmission: 5 Years
Hofmann USA warrants to the original purchaser that its equipment installed in the United States will be free from defects in materials & workmanship. Should any failure in the above mentioned warrant of workmanship & material appear within one year of delivery, Hofmann USA shall. Upon being satisfied that it products has been properly handled, stored, installed and operated, correct such defects by repair or replacement at its expense. Any service labor required by reason or replacement within one year will be provided free of charge.
No Warranty is made to any equipment which has been altered or repaired by anyone other than an authorized service representative or Hofmann USA, or as to any product which has been subject to abuse, misuse or negligence. This warrant only covers equipment delivered and used with the USA.
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Accommodates Large Wheel & Tire Assemblies - Allowing for a tire diameter of 50" and an outer-wheel diameter of 21", the monty 1620 can handle wheel and tire assemblies found on cars and light trucks
- Dual Wheel Clamping Cylinders - Dual pneumatic clamping cylinders control all four clamping jaws, eliminating damage to wheels due to slippage
- Four-Jaw Clamping Chuck - Self-centering and clamps wheels with either 24" inner or 21" outer diameter
- Multi-Position Bead Breaker - 6,000 lbs of power at the bead shovel and a range of up to 15 3/8" wide. The two-stage pneumatic cylinder provides precise power and can be toggled with the foot pedal as needed, making both the stiffest and the softest sidewalls a snap
- Powerful Tire Inflation System - Powerful air blast operated by the foot pedal. Each moveable jaw is precisely set to the exact position under the wheel to seal the tire bead
- Built To Last - Heavy, solid 1/2" thick steel clamping table. Rugged steel-reinforced chassis. Rust-proof sir cylinders and valves. Compressed air lubricator and regulator on-board
- Upgradeable - EasyMont Pro features a three-piece design with a top roller, pressing foot and lifting disc. Each piece provides a specialized function that assists a single operator in mounting/demounting low-profile and high-performance tires
- Optional Wheel Protectors Available - Protects even the most expensive alloy wheels and provides extra insurance with ultimate wheel protection so that even the most expensive wheels can be changed without an additional expense
Optional EAA0329G36B EasyMont Pro Pneumatic Bead Assist
EasyMont Pro features a three-piece design with a Top Roller, Pressing Foot, and Lifting Disc. Each piece provides a specialized function that assists a single operator in mounting/demounting low-profile and high-performance tires.
- Bead Assist Device for Monty 1625 & 1625em Machines.
- Assists operator with bead lubrication, wheel clamping, lower bead lifting, re-loosens beads, and allows easy one-operator mounting of the stiff upper bead.
- EAA0329G36B - Standard with monty 1625em (M1625EM110), Optional with monty 1625 (EEWH748A & MONTY1625).
- Top Roller
- Demounting - Presses down on the tire sidewall, provides clearance for easy positioning of the mount/demount head, upper bead lubrication, and easy insertion of the demount tire lever.
- Mounting - The roller retains the bead under the nose of the mounting head. Works in conjunction with the Pressing Foot to keep the tire bead below the wheel drop center as the tire rotates 360° during the mounting process.
- Pressing Foot
- Tire Clamping - Presses the wheel in the center hole which allows the lower bead to clear the wheel’s rim for easy clamping.
- Tire Mounting - Presses the upper tire sidewall into the drop center and holds it in place during the 360° rotation required for mounting the upper bead is complete. Allows one-technician operation for mounting stiff sidewall, run-flat and high-performance tires.
- Lifting Disc: Loosens lower beads that often re-seat. To remove the upper bead, the lower bead must be free to move vertically during demounting. Provides an "extra hand" to lift and hold wide tires to facilitate insertion of the demount lever to remove the lower bead.
- For better cosmetic protection of expensive tires and wheels, an optional adjustable bead breaking disc can be fitted to the EasyMont Pro. This disc allows for breaking the tire beads using 360° tire rotation while the disc gently presses the tire bead dynamically, thus preserving tire and wheel.
|
|
 |
 |
 |
 |

Accessories for this product... |
|
|

|