 |
 |
 |
|
Hofmann geodyna™ 7100 Wheel Balancer
The Hofmann geodyna® 7100 offers space-saving usability, with belt-driven one-spin balance, the VPM measuring system, user-friendly 2D SAPE data entry and an intuitive control panel.
Gauge Arm
Semi-automatic data entry and positioning of adhesive weights.
Oversize shaft
The 225 mm length allows the use of stud-hole flanges and other accessories for almost every type of rim.
Split Weight Mode
Hides adhesive weights behind two adjacent spokes so they cannot be seen from the outside.
QuickBAL™
30% reduced cycle time, less than 4,5 seconds, maintaining the same high accuracy.
VPI Technique
VPI (Virtual Plane Imaging) is a measurement system for high precision and repeatability.
|
Specifications
|
geodyna™ 7100
|
|
Vehicles Supported
|
Passenger car / light truck / SUV / off-road
|
|
Display Technology
|
Digital LED display
|
|
Measuring Speed
|
< 100 RPM
|
|
Balancing Accuracy
|
0.035 oz / 1 g
|
|
Angular Resolution
|
0.7 degree
|
Start/stop balancing time
(wheel 195 / 65R15)
|
6 seconds
|
|
Vibratory System Technology
|
VPM with integrated flange
|
|
Wheel Clamping
|
Quick nut
|
|
Wheel Guard
|
Yes
|
|
Maximum Wheel Dimensions
|
|
Maximum Wheel Diameter
|
37.8"
|
|
Wheel Width Range
|
3" - 20"
|
|
Maximum Wheel Weight
|
154 lbs / 70 kg
|
|
Manual Data Entry Specifications
|
|
Rim Diameter
|
8" - 32"
|
|
Offest Range
|
1" - 20"
|
|
Rim Width Range
|
1" - 20"
|
|
Semi-Automatic Data Entry (SAPE) Specifications
|
|
Data Entry - Diameter & Offset
|
Semi-automatic, guage arm
|
|
Data Entry - Wheel Width
|
Manual
|
|
Rim Diameter Range
|
8" - 25"
|
|
Rim Width Range
|
Manual
|
|
smartSonar
|
No
|
|
easyALU (automatic balancing mode detection)
|
No
|
|
Additional Specifications
|
|
Diameter of Shaft
|
40mm
|
|
Length of Shaft
|
8.86" / 225 mm
|
|
Balancer Flange Offset
|
10.55" / 268 mm
|
|
Main Shaft Lock
|
Mechanical
|
|
Wheel Braking after Measurement
|
Automatic
|
|
Power Requirement
|
EEWA761A: 115V 1Ph 50/60Hz 120W
EEWA761A230: 230V 1Ph 50/60Hz 120W
|
|
Dimensions (wheel guard open)
|
3.3" L x 39.6" W x 67.4" H
(1,100 x 1,005 x 1,711 mm)
|
|
Packaging Dimensions
|
37" L x 29.9" W x 46.5" H
(940 x 760 x 1,180 mm)
|
|
Weight Application
|
|
Clip Weights
|
Manual at 12h
|
|
Tape Weights
|
Guage arm at 12h
|
|
Software Features
|
|
Balancing Program Selection
|
Manual
|
|
Spoke Position Detection
|
Manual
|
|
Multiple User Capability
|
No
|
|
Stop in Position
|
No
|
|
Auto Stop System (:SAPE arm)
|
No
|
|
Split Weight
|
Yes
|
|
Minimization
|
Yes
|
|
Optimization
|
Yes
|
|
Self-Calibration
|
Yes
|
|
Job Counter
|
Yes
|
- Labor: 90 Days
- Parts: 90 Days
- Consumables: 90 Days
- Electronic Circuit Boards: 90 Days
- Electric Motor: 90 Days
Hofmann USA warrants to the original purchaser that its equipment installed in the United States will be free from defects in materials & workmanship. Should any failure in the above mentioned warrant of workmanship & material appear within one year of delivery, Hofmann USA shall. Upon being satisfied that it products has been properly handled, stored, installed and operated, correct such defects by repair or replacement at its expense. Any service labor required by reason or replacement within one year will be provided free of charge.
No Warranty is made to any equipment which has been altered or repaired by anyone other than an authorized service representative or Hofmann USA, or as to any product which has been subject to abuse, misuse or negligence. This warrant only covers equipment delivered and used with the USA.
|
|
|
 |
|
 |
|
|
|
Owned & Operated in the U.S. since 1987
