 |
 |
 |
 |
Hofmann 670ComboS Alignment Equipment Package
Hofmann 12K EELR709A Surface-mount Scissor Alignment Lift w/2-Rolling Jacks & Rear Slip Plates
The Hofmann 12k Scissor Alignment Lift is a rugged 12,000 lb capacity scissor alignment lift with open front design that provides easy access to alignment service and calibration areas. “Pro-Style” 24" wide runways provide easy drive-on for large vehicles. Hydraulic equalization and full support rear member deliver repreatable smooth level lifting. Flush mounted rear slip plates with heavy-duty encapsulated bearings support and offer smooth movement to ease rear alignment adjustments.
Hofmann EEWA715H geoliner™ 670XD Imaging Wheel Alignment System w/AC400 Touchless Alignment Wheel Clamps, 22" LCD Flat Panel Display & Geo Pro42 Software
The geoliner 670 XD Imaging Wheel Alignment System is one of the most advanced alignment systems on the market today. Patented imaging technology provides accurate and real-time measurements that improve productivity. User friendly features such as EZ-TOE, VODI and an extensive vehicle specification database delivers customer satisfaction, ease of use and accuracy.
Versatile, Accurate Hardware
- High resolution cameras produce accurate, live alignment readings and diagnostic data
- Passive front and rear XD targets improve durability with no electronics to damage
- Advanced XD targets and AC200 clamps are lightweight, durable and impact resistant
Advanced Dimensioning*
- Cross-diagonal* measurements identify frame or structural damage
- Rolling Radius* identifies mismatched tire sizes - a potential cause of vehicle pulling and driver complaints
Ride Height* Measurement
- Measure right height and obtain proper alignment specifications for those vehicles requiring it
- Measure manually or use the Target Imaging Pointer (TIP)

EZ-Toe*
- Turn the front wheels and access difficult adjustment points while still displaying centered toe readings
- Eliminate redundant steps in front toe adjustments
- Adjust front toe quickly
User-Friendly Interface
- Use available step-by-step instructions as a guide for completing even the most complex tasks
Manufacturer Specifications
- Extensive OEM specifications allow quick and accurate vehicle selection
VODI™
- Vehicle Orientation Directional Indicator - guides the technician through the measurement process
Help Videos
- View detailed videos of how to make needed adjustments to complete even the most complex tasks
AC400 Touchless Alignment Wheel Clamp Compatible
Secure Clamping Without Touching the Rim*
- Only the tire is contacted
- Clutch limited clamping force ensures accurate and repeatable results
- Durable and lightweight magnesium construction
Fast and Easy to Use
- Clamping is accomplished with a single fast-action adjustment knob
- No accessories needed to accommodate the full range of tire sizes
- Large, comfortable handle allows ergonomic use
- XD targets are lighter and take up less space than previous designs
Specifications
|
EELR709A - EELR724A
|
Lifting Capacity
|
12,000 lbs.
|
Overall Width
|
90" (228.6 cm)
|
Overall Length
(EELR709A Surface-Mount)
|
267 3/8" (679 cm)
|
Overall Length
(EELR724A Flush-Mount)
|
N/A
|
4-Wheel Alignment Wheelbase
|
89" to 158" (226 cm to 401 cm)
|
2-Wheel Alignment Wheelbase
|
Up to 165" (419 cm)
|
Service Wheelbase
|
179" (455 cm)
|
Runway Surface Width
|
23" (58 cm)
|
Maximum Raised Height
|
70" (178 cm)
|
Lifting/Lowering Time (Fully Loaded)
|
95 seconds up / 45 seconds down
|
Air Supply Requirements
|
90 - 140 PSI @ 5 - 10 CFM
|
Console Dimensions
|
16.5" D x 14.125" W x 45.75" H
|
Shipping Weight
|
6,615 lbs (3,001 kg)
|
Roller Jack Specifications
|
EELR512A
|
Lifting Capacity
|
6,000 lbs (2722 kg)
|
Minimum Working Height with Adapter
|
4" (10 cm)
|
Fully Raised Without Extension Adapter
|
14.75" (12 cm)
|
Extension Adapter
|
2.438" (5 cm)
|
Min Arm Reach
|
37" (94 cm)
|
Max Arm Reach
|
56" (142 cm)
|
Specifications
|
geoliner™ 670XD EEWA715H
|
Tire Diameter
|
19" - 39" (48.3 cm - 99.1 cm)
|
Track Width
|
48" - 96" (122 cm - 244 cm)
|
Wheelbase
|
79" - 180" (201cm - 457cm)
|
Printer
|
Included
|
Power Requirements
|
120/230V, 1Ph, 60HZ
|
Shipping Weight
|
445 lbs (202 kg)
|
Specifications
|
AC400 Series
|
Construction
|
Cast magnesium
|
Clamping Force
|
37 lbs (164.6 N)
|
Software Requirements
|
Pro42 Version 7.4 or higher
|
Measuring only
|
6" x 8" (152mm x 203mm)
|
Weight
|
6.9 lbs (3.3 kg)
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
670ComboS Includes Camera Mounting Fixture EAA0321J19C, 2 x Rolling Jacks EELR512A, Turntables EAK0289J06A, & Rollback Kit EAK0277J28A
EELR709A Surface-mount 12K Scissor Alignment Lift
- Durable Compact Design
- Utilizes less space than conventional four post lifts
- Lifts straight up - no for or aft movement
- Compact, enclosed control console
- Quad counterpoised lifting system with four heavy-duty cylinders to maintain a constant level from floor to full cylinders to maintain a constant level from floor to full lift height with reinforcing rear mounted cross member
- Multiple Safety Systems for Maximum Operated Protection
- Auto engaging mechanical locks
- Cross linked hydraulic circuit to four lifting cylinders
- Hydraulic flow valves
- Dual engaging twin interlocking serriform mechanical safety racks with pneumatic release
- Conforms with current ANSI/ALI ALCTV:2011 lift standard
- Reinforced 24" Pro-Style runways with non-skid surface accommodates a wide vehicle range
- Open front design provides easy access to alignment service and calibration areas of vehicles
- Smooth lift operation - gliding bearings are captured providing durable smooth lift operation
- Adjustable turn plate pocket depth ensures level positioning of turn plates
- Secondary lifting provides two powerful 6,000 lb capacity air/hydraulic jacks
- Unique approach ramps expands from 59" to 76", easing loading of lower profile vehicles
- Flush mounted rear slip plates include heavy-duty encapsulated bearings to ease rear alignment adjustments
Standard Accessory
EELR512A
6,000lbs, Rolling Air Jack w/height adapters & Air/Hydraulic (Use w/EELR709A)
Available Configurations
Part Number
|
Description/Model
|
EELR709A
|
Surface-mount Configuration
|
EELR724A
|
Flush-mount Configuration
|
Optional Accessory Available
Part Number
|
Description
|
EAK0289J06A
|
Optional Front Radius Turn Plates (Set of Two)
|
geoliner™ 670 Pro42 Imaging Wheel Alignment System
- Versatile, Accurate Hardware
- Standard Dimensioning
- AC400 Clamps with XD Targets
- Ride Height Measurement
- EZ-TOE
- User-friendly Interface
- Manufacturer Specifications
- VODI™
- Help Videos
AC400 Touchless Alignment Wheel Clamp Compatible
- Sold in sets of four
- Clamping on the Tire - The clamp only engages the tire eliminating contact with the rim
- Fast - Single point adjustment knob adjusts to the full size range in just a few turns
- Ergonomic Design - Large handle and intuitive tightening knob are easy to operate and accommodate gloved hands
- Self Centering Design* - Allows measurement of cross diagonal and tire rolling radius to reveal collision damage and mismatched tire sizes
- Lightweight and Durable - Drop tested cast magnesium construction eases the weight that users have to carry
- Accurate and Repeatable - secure clamping delivers accurate and hightly repeatable results
- Secure - clutch limited clamping force ensures consistent and secure attachment*
Standard Accessories
Part Number
|
Description
|
00055502000
|
Steering Wheel Holder
|
00000096000
|
Brake Pedal Depressor
|
EAA0305J48A
|
Camera Beam Assembly
|
Available geoliner 670 XD Models
Part Number
|
Description
|
EEWA715G
|
geoliner 670 XD with AC200 Clamps
|
EEWA715GE
|
geoliner 670 XD with AC200 Clamps & ETHOS+
|
EEWA715H
|
geoliner 670 XD with AC400 Clamps
|
EEWA715HE
|
geoliner 670 XD with AC400 Clamps & ETHOS+
|
|
|
 |
 |
 |
 |
|
 |

|