 |
 |
 |
 |
HeatStar by Enerco F170035 HS35FA 35,000 BTU Forced Air Propane Industrial Heater
Heavy-duty design built for the jobsite. The Heatstar 35,000 BTU Propane Forced Air Heater comes with a standard 20ft hose, regulator and all the safety you would expect of a Heatstar product. Equipped with factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any jobsite. Just plug the heater into a 110v outlet, then hook up the included hose and regulator to a 20lb propane tank or larger and you are ready to take the chill out of any job.
Specifications
|
F170035
|
Model
|
HS35FA
|
Heating Area (Sq Ft)
|
800
|
Tank Capacity (Min)
|
20lb Propane Cylinder
|
BTU per Hour
|
35,000
|
Run Time (Hrs at Max BTU)
|
N/A
|
Run Time (Hrs at Min BTU)
|
N/A
|
Fuel Consumption/Burn Rate (Gal/Hr)
|
N/A
|
Electricity Required
|
No
|
Maximum Elevation (Ft)
|
N/A
|
Oversized
|
No
|
Disclaimer
|
None
|
Use
|
Construction Sites, Garage, Workshops, Agricultural Buildings, Remodeling Jobs, Industrial or Commercial Workspaces, Emergencies
|
Thermostat
|
No
|
Safety Tip-Over Switch
|
No
|
Fuel Type
|
Propane
|
Heat Type
|
Forced Air
|
Oxygen Depletion Sensor (ODS)
|
No
|
High Limit Safety Shut-off (HLS)
|
Yes
|
Indoor Safe
|
No
|
Ignition
|
Continuous
|
Hose & Regulator Included
|
No
|
Length
|
20.5"
|
Width
|
9.75"
|
Height
|
N/A
|
Warranty
|
1 Year Limited
|
Weight
|
19.85 lbs
|
|
|
 |
 |
 |
 |

|