 |
 |
 |
|
HeatStar by Enerco F170125 HS125FAV 125,000 BTU Forced Air Propane Industrial Heater
Heavy-duty design built for the jobsite. The Heatstar 75,000 - 125,000 BTU Propane Forced Air Heater comes with a standard 20ft hose, regulator and all the safety you would expect of a Heatstar product. Equipped with a factory installed high limit switch and continuous solid state ignition, you can feel comfortable using this heater on any jobsite. Just plug the heater into a 110v outlet, then hook up the included hose and regulator to a 100lb propane tank or larger and you are ready to take the chillout of any job.
|
Specifications
|
F170125
|
|
Model
|
HS125FAV
|
|
Heating Area (Sq Ft)
|
3,000
|
|
Tank Capacity (Min)
|
40lb Propane Cylinder
|
|
BTU per Hour
|
75,000 - 125,000
|
|
Run Time (Hrs at Max BTU)
|
N/A
|
|
Run Time (Hrs at Min BTU)
|
N/A
|
|
Fuel Consumption/Burn Rate (Gal/Hr)
|
N/A
|
|
Electricity Required
|
No
|
|
Maximum Elevation (Ft)
|
N/A
|
|
Oversized
|
No
|
|
Disclaimer
|
None
|
|
Use
|
Construction Sites, Garage, Workshops, Agricultural Buildings, Remodeling Jobs, Industrial or Commercial Workspaces, Emergencies
|
|
Thermostat
|
No
|
|
Safety Tip-Over Switch
|
No
|
|
Fuel Type
|
Propane
|
|
Heat Type
|
Forced Air
|
|
Oxygen Depletion Sensor (ODS)
|
No
|
|
High Limit Safety Shut-off (HLS)
|
Yes
|
|
Indoor Safe
|
No
|
|
Ignition
|
Continuous
|
|
Hose & Regulator Included
|
No
|
|
Length
|
21.25"
|
|
Width
|
11.75"
|
|
Height
|
N/A
|
|
Warranty
|
1 Year Limited
|
|
Weight
|
21.9 lbs
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 75,000 - 125,000 BTU per hour
- For use with propane gas
- Heats up to 3,000 sq.ft
- Rugged and durable steel construction
- Economical, efficient and clean burning
- Heavy duty high output fan
- Hose and regulator included
- 40 lb. propane tank is required (Not Included)
|
|
|
|
|
|
|
|
|
Owned & Operated in the U.S. since 1987
