 |
 |
 |
|
BendPak GrandPrix™ GP-7 Bi-Metric™ ALI 2 Post Lift & 5174042 Turf Maintenance Lift Kit
GrandPrix™ GP-7 Bi-metric™ Narrow Bay ALI 2 Post Lift
To View or download the lift inspection guide
Click Here.
Full Height and Slim Posts Save Space
With its small footprint, optimal lifting height, speedy lifting times and incredible safety features to guarantee your protection, the GP-7 is a clear-cut revolution in engineering. It all starts with the design. The super-slim car lift columns are capable of lifting up to 7,000 lbs. with incredible ease. In fact, vehicles will reach a max lifting height of 78" twice as fast as other lifts. This is possible thanks to a hydraulic cylinder that runs through the overhead crossbar, which acts in tandem with dual aircraft lifting cables to provide lifting force from two sources. For every inch of cylinder extension, the lift carriage rises 2 inches. The obvious benefit of this is reduced downtime and faster turnaround. We don't have to tell you that means higher profits and happier techs.
To View More Info on the BendPak GrandPrix™ GP-7L Click Here
BendPak 5174042 Turf Lift Accessory Kit
BendPak’s exclusive turf kit offers a durable, safe and reliable system for virtually every turf lifting application. Powerful and secure, the turf equipment maintenance lift kit greatly increases speed and maintenance repair work on all popular sizes of turf maintenance equipment, from large fairway mowers to greens mowers, utility carts, sand groomers, fertilizer sprayers, golf and refreshment carts. Fully adjustable wheel pan and fork assemblies fit a wide array of wheel arrangements.
This turf kit provides open access to the gear box, blades, reels and other essential components, and it all means greater shop efficiency. Easily switch between the turf kit and a standard swing arm assembly to convert your two-post turf lift back into a regular two-post car lift.
Whatever your golf course or grounds maintenance/grooming vehicle requirements, this one turf kit is designed to meet your needs. Even before you start looking at other options, you'll be impressed with our long list of standard features and capabilities that are packed into every two-post lift to which our turf kit adapts.
|
Model
|
GP-7LCS
|
GP-7LC
|
GP-7
|
|
Capacity
|
|
Lifting Capacity: (*)
|
7,000 lbs. / 3,175 kg
|
|
*Max Capacity / Front Axle
|
3,500 lbs. / 1,588 kg
|
|
*Max Capacity / Rear Axle
|
3,500 lbs. / 1,588 kg
|
|
Rise
|
|
A - Rise Height
|
54” / 1,372 mm
|
64” / 1,626 mm
|
74.5” / 1,892 mm
|
|
B - Rise + Pad Only
|
58” / 1,473 mm
|
68” / 1,727 mm
|
78” / 1,981 mm
|
|
C - Rise + Pad + Adapter
|
66” / 1,676 mm
|
76” / 1,930 mm
|
86.5” / 2,197 mm
|
|
C - Min. Height + Pad
|
4.5” / 114 mm
|
|
Time to Full Rise
|
45 seconds
|
50 seconds
|
55 seconds
|
|
Outside Dimensions
|
|
E - Height Overall
|
106.5” / 2,705 mm
|
118.5” / 3,010 mm
|
150” / 3,810 mm
|
|
F - Width Overall
|
125” / 3,175 mm
|
|
G - Outside Columns
|
119.5” / 3,035 mm
|
|
Inside Dimensions
|
|
H - Inside Columns
|
110” / 2,794 mm
|
|
I - Drive-Thru Clearance
|
98” / 2,489 mm
|
|
J - Floor To Overhead Switch
|
96” / 2,438 mm
|
108” / 2,743 mm
|
140” / 3,556 mm
|
|
Arms & Pads
|
|
K - Min Front Arm Reach
|
26” / 660 mm
|
|
K - Max Front Arm Reach
|
42” / 1,067 mm
|
|
L - Min Rear Arm Reach
|
28” / 711 mm
|
|
L - Max Rear Arm Reach
|
47.5” / 1,207 mm
|
|
Max Load Per Arm
|
1,750 lbs. / 794 kg
|
|
Electrical
|
|
Motor
|
220 VAC / 60 Hz. 1Ph
|
|
Noise
|
45 dB
|
The design, material and specifications are subject to change without notice.
*CE Approved and Certified. Meets or exceeds the standards prescribed by European Standard EN 1493. Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition) or ANSI/UL 201. Consult
www.autolift.org for a complete list.
|
Specifications
|
5174042
|
|
Capacity
|
|
Capacity
|
7,000 lbs. (3,175 kg)
|
|
Max Wheel Pan Load
|
3,500 lbs. (1,588 kg)
|
|
Max Load Per Fork
|
1,750 lbs. (794 kg)
|
|
Shipping Dimensions & Weight
|
|
Shipping Dimensions
|
117" x 29" x 20" (2,971 mm x 736 mm x 508 mm)
|
|
Shipping Weight
|
942 lbs. (427 kg)
|
 ://www.bestbuyautoequipment.com/v/vspfiles/BendPak/Accessories/5174020TurfKit/517402-specs.jpg" alt="BendPak 5174020 Turf Kit specs"/>
Better Products – Better Service – Better Value
LIMITED WARRANTY. Subject to the limitations of set forth below, Warrantor warrants that the Product sold hereunder conform to Warrantor's
published specifications. WARRANTOR MAKES NO REPRESENTATION OR WARRANTY OF ANY OTHER KIND, EXPRESS OR IMPLIED, WITH RESPECT TO
THE GOODS, WHETHER AS TO MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
- Five Years (60-Months) Warranty on the lift structure
- Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Warranty on electrical components (excluding power unit)
- One Year (12-Months) Labor Warranty on site or at factory*
- One Year (12-Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift***
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by overloading Product beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any failure that results from improper installation or use not according to specifications
- Damage caused by disasters such as fire, flood, wind, and lightning
- Damage caused by unauthorized attachments or modifications
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- Immediately upon receipt of the Product, Purchaser shall inspect the same. Any claim for shortage must be made within ten days after Purchaser's receipt. All other claims, including claims for alleged defective Product, must be made within fifteen days after Purchaser learns of the facts upon which such claim is based, but in no event later than the applicable one, two or five year period specified above for the specified component(s). All claims not made in writing and received by Seller within the time periods specified above shall be deemed waived. With respect to any defects incapable of discovery until in use, all claims for any
damages or losses as a result of such defects shall be deemed waived unless made in writing and received by Seller within fifteen days after Purchaser learns of the alleged defect giving rise to the claim and after the expiration of said periods, but in no event later than the applicable one, two or five year period specified above for the specified component(s). Purchaser expressly assumes all liability for all such damages or losses, irrespective of any use which shall have taken place or whether the alleged defect shall have occurred or been discovered prior to expiration of such periods.
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*As determined by Warrantor in its sole discretion**Free-shipping applies to direct shipping points within the 48 continental United States.
Rural area shipping surcharge may apply for remote addresses. ***For all BendPak brand Two-Post or Four-Post Vehicle Service Lifts
(excluding specialty lifts, high rise, commercial parking, material handling, or models for particular purpose) manufactured on or following
1/1/2011.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
