 |
 |
 |
 |
Challender EV1520 EnviroLift® Inground Car Lift 15,000 lb. Capacity
To view or download the lift inspection guide
Click Here.
Challenger is the exclusive manufacturer of the only 15,000 lb. capacity heavy duty inground lifts in the market. The EV1520 Heavy-Duty arms are engineered to lift heavier commercial vehicles and require less shop space than heavy-duty two post lifts, making the EV1520 inground lifts a great choice.
The EV1520 heavy duty inground lifts are equipped with standard, medium and high extension stack adapters to accommodate a wide variety of Heavy-Duty vehicle lift points. Our Heavy-Duty Inground Lifts are fully contained in a recycled polymer housing to protect your investment and the environment.
Challenger’s electric hydraulic cassette style inground EnviroLift® meets the rigorous demands of
professional service facilities. With over 50% more bearing contact surface than competitor’s lifts, enhanced wipers both top and bottom and larger 8-1/2” chrome pistons, your shop will have a superior, more stable and repeatable lift resulting in increased productivity. These inground lifts also eliminate environmental concerns with a fully contained polymer housing made from recycled
plastic.
EnviroLifts require less shop space than surface mounted lifts. With a smaller footprint, your shop will maximize the number of service bays, resulting in higher parts and service revenue. EnviroLift® also creates a professional showroom style appearance with its open, aesthetically pleasing look.
2-Stage Arms
The heavy-Duty 2-stage drive-over front and rear swing arms and standard combination stack screw pads accommodate a wide range of heavier vehicle lift points.
Other standard features include a mechanical locking ladder that engages every 3” and a stainless steel air lock release cylinder to prevent rust associated with condensation. Available in 10,000, 12,000 and the exclusive 15,000 lb. lift capacity.
The traditional EV1520 inground lifts come standard with Part# 10315 Stack Adapter Extension Kit, #10318 Four Frame Engaging Truck Adapters and #10317 Four Reducer Bushings for use with 10318. Frame engaging adapters (Part #10314 or 10318) are
REQUIRED when lifting vehicles with frame construction.
Standard Accessories

Stack Adapter Extension Kit P/N 10315 Stack Adapter Kit for 10,000 and 12,000 lb. two post and inground car and truck lifts. Drop-in style stack adapters help reach pickup points on vehicles with running boards or side steps. Simply take out the screw pad, drop in the stack adapter extension and replace screw pad to reach lifting points. Stack Adapter Extension Kit includes four 3" Stack Extensions, two 6" Stack Extensions & two Organizer Racks with hardware. Organizer racks mount to automotive lift column to keep adapters within reach. Works with all Challenger two post automotive lifts.
Four Frame Engaging Truck Adapters P/N 10318 Set of 4 frame engaging truck adapters for 10,000, 12,000, 15,000 and 18,000 two post automotive lifts. Frame engaging adapters are ideal for lifting vehicles such as pickup trucks with frames. They provide direct contact to frames without the slipping associated when lifting on slippery, sprayed undercoatings with traditional rubber pads. Cradle provides secure fit to frame in tight spaces. Works with all Challenger above ground two post lifts. 15,000 & 18,000 two post automotive lifts require reducer busing kit part #10317.
Four Reducer Bushings P/N 10317 Set of 4 to use with p/n 10318 Four Frame Engaging Truck Adapters.
Model Number
|
EV1520
|
|
15,000 lbs. (6806kg)
|
|
68" (1727mm)
|
A Rise Height1
|
84-3/4" (2153mm)
|
B Width Overall
|
71-1/2" (1816mm)
|
C Drive-Thru Clearance
|
N/A
(2210mm)
|
D Reach (Arm Minimum)
|
26-1/4" (667mm)
|
E Reach (Arm Maximum)
|
43" (1092mm)
|
F Adj. Adapter Height2
|
6-1/2 - 8-1/4" (165 - 210mm)
|
G Adj. Adapter Height2
(with Medium Extensions)
|
10-1/2" - 12-3/4" (267 - 324mm)
|
H Adj. Adapter Height2
(with High Extensions)
|
14-1/2" - 16-3/4" (368 - 425mm)
|
Capacity (Per Arm)
|
3750 lbs. (1701kg)
|
Guide Plunger Diameter
|
8 1/2 (216mm)
|
Motor
|
2HP
|
Voltage (Single Phase Std.)
3
|
208v-230v
|
Speed of Rise
|
60 seconds
|
Air Required
|
75-125 psi
|
Ceiling Height Required
|
85" (2159mm)
plus height of tallest vehicle
|
Shipping Weight
|
3100 lbs. (1406 kg)
|
1 Car Lift Rise Height is measured with superstructure in highest position.
2 Medium and high auxiliary adapter extensions are standard.
3 Optional 3 phase electrical also available. Specify at time of order.
Optional frame engaging adapters (10314 or 10318) are REQUIRED when lifting vehicles with frame construction.
LIMITED WARRANTY
Challenger Lifts, Inc. lifts are guaranteed to the original owner. CLI shall repair or replace, at CLI option, for the full warranty period those
parts that prove upon inspection to be defective and pay for reasonable costs of transportation and/or labor for replacement of said parts
for the warranty period stated below. This warranty shall not apply unless the product is installed, used and maintained according to CLI’s
specifications set forth in CLI’s installation, operation and maintenance instructions. Use of any unapproved parts or accessories will void
your warranty. This limited warranty extends only to the original purchaser and is not transferable. This warranty is valid only if the product
has been registered with Challenger Lift, Inc., www.challengerlifts.com.
This warranty does not cover normal maintenance or adjustments, damage or malfunction caused by improper handling, installation,
abuse, misuse, negligence, carelessness of operation, or normal wear and tear. In addition, this warranty does not cover equipment when
repairs have been attempted or made by anyone other than a CLI authorized service representative.
This warranty is exclusive and is in lieu of all other warranties expressed or implied including any implied warranty of fitness for a particular
purpose, which implied warranties are expressly excluded. No employee, agent, representative, dealer or other person or entity is
authorized to give any warranties of any nature on behalf of CLI.
The remedies described are exclusive and in no event shall CLI, Inc. be liable for special, consequential or incidental damages
for the breach of or delay in performance of the warranty. This warranty shall be governed by the Commonwealth of Kentucky,
and shall be subject to the exclusive jurisdiction of the Court in the Commonwealth of Kentucky in the County of Jefferson.
Functional parts are any wear items, as defined from time to time by Challenger Lifts. Examples include power units,
cylinders, sheaves, hoses, cables, controls, etc. and may differ depending on the model of lift.
Structural parts are items, as defined from time to time by Challenger Lifts, Inc. that are not Functional Parts and
include items like carriage, columns, arms, runways, plungers, etc. and may differ depending on the type of lift.
EXTENDED WARRANTY
An extended warranty is available for purchase for NEW CL/EV Series lifts. The Extended Warranty must be purchased within 30 days of lift invoice, and extends the Functional Parts coverage by an additional 3 years (5 Years total). Lift must be installed by and authorized Challenger installer. Extended
warranty does not apply to accessories.
Note: WARRANTY CARD MUST BE COMPLETED AND RETURNED UPON INSTALLATION FOR VALIDATION or WARRANTY PERIOD WILL BEGIN FROM INVOICE DATE OF LIFT PURCHASE.
WARRANTY MAY ALSO BE VALIDATED BY REGISTERING ONLINE @
www.challengerlifts.com/register-your-lift
Click on Image to Enlarge or Download
|
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Features
- Larger 8 1/2” diameter chrome pistons
provides greater stability under load
- Chrome non-breathing ram style cylinder(EV1020 only) minimizes water intake and other contamination
- Enhanced raised wiper at top and bottom of bearing provides better grease retention and minimizes contaminates from entering into bearings
- Over 50% longer bearing contact than competitor lifts provides increased stability
- Mechanical lock engages every 3˝ provides safety and allows technician to work at their ergonomic height to increase productivity and minimize fatigue
- Stainless Steel air lock release cylinder promotes longer working life with its corrosion resistant design
- Fully contained and sealed recycled polymer cassette tub
eliminates risk of hydraulic fluid seeping into the ground
- Double telescoping screw adjusts from 3-7/8” to 6” with removable rubber pad for frame contact (EV1020 only)
- Wide drive-thru at 87” accommodates wider vehicles, minimizes tire pinching and provides easy drive-on
(EV1020 and EV1220 only)
|
|
 |
 |
 |
 |
|
 |

|