|
|
|
|
|
|
|
|
|
|
|
|
|
iDeal Lift 7000TLX Low Rise, Portable Tilt Lift
The iDEAL 7000TLX is a low-profile, lightweight, portable 7,000 lb. capacity low-rise scissor frame contact tilt lift designed for unibody type passenger & small sport utility vehicles.
Specifications: 7000TLX
- Capacity: 7,000 lbs
- Overall Length: 51-3/4"
- Overall Width: 64-3/8"
- Platform Length & Width: 31-1/2 - 7-1/4"
- Power (Corded Drill Not Included): 120 Vac 1/2" / 10 Amp
|
Ranger 7000TL 7K QuickJack™ Portable Lift
7000TL now lifts to an impressive 24.5" lift height. Reinforced upper frame rails give this lift enough strength to effortlessly raise passenger cars, light-duty trucks, and SUVs. For higher ground-clearance vehicles, don't forget to pick up our truck adapter set. The extra spacers will offer additional lifting height!
Specifications: 7000TL
- Capacity: 7,000 lbs
- Frame Length: 70.75"
- Frame Width: 12.5"
- Max Lifting Height: 24.5"
- Time to Full Rise: 30 sec
- Power Unit: 110V
|
QuickJack™ 7000TLX 7K Ex-Length Portable Lift
7000TLX is a 7,000-lb. capacity, extended-length truck lift that's specially made for raising heavy-duty powerhouses. Its 66" lift point reach is ideal for long-wheelbase vehicles, trucks and SUVs. It even fits under most sports cars and sedans.
Specifications: 7000TLX
- Capacity: 7,000 lbs
- Frame Length: 76"
- Frame Width: 12.5"
- Max Lifting Height: 24.5"
- Time to Full Rise: 30 sec
- Power Unit: 110V
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
QuickJack™ 7000TLX 7K Ex-Length Portable Lift Package Deal
7000TLX is a 7,000-lb. capacity, extended-length truck lift that's specially made for raising heavy-duty powerhouses. Its 66" lift point reach is ideal for long-wheelbase vehicles, trucks and SUVs. It even fits under most sports cars and sedans.
Specifications: 7000TLX
- Capacity: 7,000 lbs
- Frame Length: 76"
- Frame Width: 12.5"
- Max Lifting Height: 24.5"
- Time to Full Rise: 30 sec
- Power Unit: 110V
|
AMGO® Hydraulics 407-P Parking & Service 4 Post Car Lift
The 407-P hobbyist four-post parking lift, 7,000lbs lifting capacity, narrow, short & low profile features, mobile with optional caster kits.
Specifications: 407-P
- Capacity: 7,000 lbs
- Overall Height: 82 7/8"
- Overall Width: 94 7/8"
- Overall Length w/Ramps: 185.5"
- Max Lift Height: 73 3/4"
- Power Requirements: 1.0Hp 110V/60 Hz
Limited Time Offer Call for Special Pricing
|
AMGO® Hydraulics SL-7 7K Single Column Lift
Single post lift, 7,000lbs lifting capacity, includes both screw and insert rubber pads with 3" extension adapters.
Specifications: SL-7
- Capacity: 7,000 lbs
- Overall Height: 108-7/8"
- Overall Width: 80"
- Lift Height: 71 7/8"~77 1/8"
- Power Requirements: 110V/60Hz / 1 Ph or 220V/60Hz / 1 Ph
Limited Time Offer Sale Price & Call for Better Deal Valid thru Sept 21st or While Supplies Last!
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMGO® Hydraulics SML-7 7K Portable Single Column Lift
Portable single post lift, 7,000lbs lifting capacity, includes both screw and insert rubber pads with 3" extension adapters. The lift can be easily moved to wherever it is needed with pallet jack.
Specifications: SML-7
- Capacity: 7,000 lbs
- Overall Height: 108-7/8"
- Overall Width: 80"
- Lift Height: 71 7/8"~77 1/8"
- Power Requirements: 110V/60Hz / 1 Ph or 220V/60Hz / 1 Ph
Limited Time Offer Sale Price & Call for Better Deal Valid thru Sept 21st or While Supplies Last!
|
MaxJax® M7K Portable Two Post Garage Lift
Standard package. For convenience, portability and compact storage, nothing beats the patented MaxJax® portable car lift. Thanks to its unique portable two-post design, the MaxJax offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems.
Specifications: M7K
- Capacity: 7,000 lbs
- Overall Height: 89.5"
- Column Height: 64"
- Max Lifting Height w/ 3" Adapter: 50.5"
- Power Unit: 110-220V / 50-60Hz/ Single Phase
|
MaxJax® M7K Portable Two Post Garage Lift
Deluxe Package. For convenience, portability and compact storage, nothing beats the patented MaxJax® portable car lift. Thanks to its unique portable two-post design, the MaxJax offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems.
Specifications: M7K
- Capacity: 7,000 lbs
- Overall Height: 89.5"
- Column Height: 64"
- Max Lifting Height w/ 3" Adapter: 50.5"
- Power Unit: 110-220V / 50-60Hz/ Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
MaxJax® M7K ALI Portable Two Post Garage Lift
Supreme Package. For convenience, portability and compact storage, nothing beats the patented MaxJax® portable car lift. Thanks to its unique portable two-post design, the MaxJax offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems.
Specifications: M7K
- Capacity: 7,000 lbs
- Overall Height: 89.5"
- Column Height: 64"
- Max Lifting Height w/ 3" Adapter: 50.5"
- Power Unit: 110-220V / 50-60Hz/ Single Phase
|
MaxJax® M7K Portable Two Post Garage Lift
Ultimate Package. For convenience, portability and compact storage, nothing beats the patented MaxJax® portable car lift. Thanks to its unique portable two-post design, the MaxJax offers greater versatility and serviceability when compared to traditional mid-rise or low-rise garage lifting systems.
Specifications: M7K
- Capacity: 7,000 lbs
- Overall Height: 89.5"
- Column Height: 64"
- Max Lifting Height w/ 3" Adapter: 50.5"
- Power Unit: 110-220V / 50-60Hz/ Single Phase
|
Atlas® Kwik Bay Open Center Portable Lift
The Atlas® Kwik Bay is a free standing 7,000 lb. capacity portable scissor lift. The Atlas® Kwik Bay is the perfect lift for body shops and wheel service specialists that need extra lifting height. This portable lift easily raises a car or SUV to a comfortable working height and does not require the operator to position arms under the lifting points of the car. Open center allows easy under-car access.
Specifications: Kwik Bay
- Capacity: 7,000 lbs
- Overall Length: 85 1/2"
- Overall Width: 72"
- Max Lift Height: 41"
- Power Requirements: 110V
Limited Time Offer Call for Special Pricing
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMGO® Hydraulics XL-7 Low-Profile Scissor Lift
On surface scissor lift with control cabinet. 7,000lbs lifting capacity with hydraulic and optional mechanical lock systems. 24V control system, dual synchronous cylinders built with hose burst valves for added safety. Includes stop switch at 300mm from ground and alarm tone when coming down from 300mm to ground.
Specifications: XL-7
- Capacity: 7,000 lbs
- Overall Width: 80"
- Overall Length w/Ramps: 79 7/8"
- Lifting Height: 78 3/4"
- Min Height: 4 1/2"
- Power Requirements: 2.0HP
|
BendPak GrandPrix™ GP-7LCS Narrow Bays & Low Ceilings Lift
The GP-7LCS is a truly one-of-a-kind design. Because it fits in garages with ceilings as low as 9', it boasts the lowest columns ever found on a permanent two-post lift. It can be installed in virtually every garage on the planet and still offers an impressive 58" rise.
Specifications: GP-7LCS
- Capacity: 7,000 lbs
- Overall Height: 106.5"
- Overall Width: 125"
- Min/Max Lifting Height: 54" - 66" (+ Pad + Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak GrandPrix™ GP-7LC Narrow Bays & Low Ceilings Lift
The GP-7LC is a shortened version of the standard GP-7, accommodating ceilings as low as 10' while offering an impressive 68" max rise. This model is truly designed for homeowners who until now could never fit a two-post lift in their garage.
Specifications: GP-7LC
- Capacity: 7,000 lbs
- Overall Height: 118.5"
- Overall Width: 125"
- Min/Max Lifting Height: 64" - 76" (+ Pad + Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Challenger CL4P7 4 Post Storage/Service Lift
Challenger’s Home Storage/DIY light duty general service lifts are commercial-grade, yet economical for DIY enthusiasts. Features 115v or 120v electric/single hydraulic cylinder w/ cable system for simple plug in and lift capability. Can be free standing for mobility or bolted to the floor for even more stability.
Specifications: CL4P7
- Capacity: 7,000 lbs
- Length Overall: 195-1/2"
- Width Overall: 100-1/2"
- Rise Height: 68-1/8"
- Power Unit: 115v or 220V / 1 HP
Limited Time Offer Receive a $300 Rebate Valid thru Sept 1st thru Oct 31st. See Details in Features!
|
BendPak HD-7P 7K Short Runways Ex-Tall Service/Parking 4 Post Lift
Shorter length and extra height, the HD-7P is the ultimate in compact convenience when you want the lifting power of a
BendPak in a tight space.
Specifications: HD-7P
- Capacity: 7,000 lbs
- Column Height: 100"
- Overall Length: 200"
- Overall Width: 99-3/4"
- Width Between Columns: 89-3/4"
- Max Lifting Height: 86-1/2"
- Power Unit: 208-230 VAC / 50-60 Hz. / 1Ph
|
BendPak HD-7W 7K Short Runways Ex-Wide, Ex-Tall Service/Parking 4 Post Lift
Shorter length, extra width, and extra height, the HD-7W is the ultimate in compact convenience when you want the lifting power of a BendPak in a tight space like a garage, service bay, or carport.
Specifications: HD-7W
- Capacity: 7,000 lbs
- Column Height: 100"
- Overall Length: 200"
- Overall Width: 110-1/4"
- Width Between Columns: 100-1/4"
- Max Lifting Height: 86-1/2"
- Power Unit: 208-230 VAC / 50-60 Hz. / 1Ph
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak GrandPrix™ Standard Height Lift
Our standard-height GP-7 is fit for garages with 13' ceilings and offers a full 78" max rise. These dimensions are similar to other two-post lifts, but the GP-7 offers a much slimmer profile than other lifts. This makes it ideal for narrow garages looking to fit more lifts in limited space.
Specifications: GP-7
- Capacity: 7,000 lbs
- Overall Height: 150"
- Overall Width: 125"
- Min/Max Lifting Height: 74.5" - 86.5" (+ Pad + Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
Atlas® Super Tall 4 Post Lift
The Atlas® ST-7000 is the perfect lift for those car enthusiasts lucky enough to have extra tall ceilings and need to store regular height vehicles on top of extra tall vehicles. The Atlas® ST-7000 raises vehicles weighing up to 7,000 lbs. all the way to over 12 feet (144 inches) under the runway.
Specifications: ST-7000
- Capacity: 7,000 lbs
- Height of Columns: 162"
- Overall Width w/Motor: 123"
- Overall Length w/Ramps: 227 1/2"
- Clearance Between Columns: 100"
- Lifting Height To Top Of Runway: 147"
- Power Requirements: 220V +/- 5% (209-231volts) 1 ph
Limited Time Offer Call for Special Pricing
|
BendPak HD-7500BLX Extra Long Boat Storage Garage Lift
Avoid rust, blemishes, rot, weather damage and more with BendPak's longer, extended-height HD-7500BLX boat lift. It's the safest, most cost-effective way to dry dock your boat.
Specifications: HD-7500BLX
- Capacity: 7,500 lbs
- Height of Columns: 100"
- Overall Length: 224"
- Overall Width: 132"
- Width Between Columns: 122"
- Max. Lifting Height: 87"
- Power Unit: 220VAC / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak HD-75BXT Ex-Length Boat Storage Garage Lift
The HD-75BXT is the perfect dry-docking solution. Keep your boat in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-75BXT pulls double-duty as a professional-grade car lift for vehicles.
Specifications: HD-75BXT
- Capacity: 7,500 lbs
- Height of Columns: 100"
- Overall Length: 248.5"
- Overall Width: 132.2"
- Width Between Columns: 122.25"
- Max. Lifting Height: 87"
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak HD-7PXW 7K Super-Tall Rise 4 Post Parking Lift
The HD-7PXW is literal giant. This 4 post lift will effortlessly lift up to 7,000 lbs. over 12' into the air! Perfect for stacking taller vehicles. The HD-7PXW is the wider model of this super tall lift.
Specifications: HD-7PXW
- Capacity: 7,000 lbs
- Column Height: 158"
- Overall Length: 224 1/2"
- Overall Width: 110 1/4"
- Width Between Columns: 100"
- Max Lifting Height: 145"
- Power Unit: 208-230 VAC / 50-60Hz / Single Phase
|
BendPak HD-75BXT Ex-Length Boat Storage Garage Lift
The HD-7500PBX is the perfect high-rise dry-docking solution. Keep your boat in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-7500PBX pulls double-duty as a professional-grade car lift for vehicles
Specifications: HD-7500PBX
- Capacity: 7,500 lbs
- Height of Columns: 157.5"
- Overall Length: 224.5"
- Overall Width: 132.2"
- Width Between Columns: 122"
- Max. Lifting Height: 144.5"
- Power Unit: 208-230V / 60Hz / Single Phase
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak GrandPrix™ GP-7LCS Narrow Bays & Low Ceilings Lift & Turf Kit
The GP-7LCS is a truly one-of-a-kind design. Because it fits in garages with ceilings as low as 9', it boasts the lowest columns ever found on a permanent two-post lift. It can be installed in virtually every garage on the planet and still offers an impressive 58" rise. The BendPak Turf Maintenance Lift Accessory Kit is the most versatile utility vehicle and lawn maintenance two-post lift turf kit in existence.
Specifications: GP-7LCS
- Capacity: 7,000 lbs
- Overall Height: 106.5"
- Overall Width: 125"
- Min/Max Lifting Height: 54" - 66" (+ Pad + Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak GrandPrix™ GP-7LC Narrow Bays & Low Ceilings Lift & Turf Kit
The GP-7LC is a shortened version of the standard GP-7, accommodating ceilings as low as 10' while offering an impressive 68" max rise. This model is truly designed for homeowners who until now could never fit a two-post lift in their garage.The BendPak Turf Maintenance Lift Accessory Kit is the most versatile utility vehicle and lawn maintenance two-post lift turf kit in existence.
Specifications: GP-7LC
- Capacity: 7,000 lbs
- Overall Height: 118.5"
- Overall Width: 125"
- Min/Max Lifting Height: 64" - 76" (+ Pad + Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak SP-7XEF Full-Rise Flush Mount Scissor Lift 7,000 lb.
This flush-mount version of our full-rise scissor lift is ideal for shops that are limited in space but have a huge demand for performance. The SP-7XEF has all the lifting height of a two-post lift without the columns that take up precious shop space. Features a 22” x 63” lift platform, hardened pivot pins, dual hydraulic cylinders and ergonomic controls.
Specifications: SP-7XEF
- Capacity: 7,000 lbs
- Max Lifting Height: 70.5"
- Lowered Height: 6.5"
- Power Requirements: 208-240 VAC / 50-60 Hz / 1Ph
Limited Time Offer $500 Rebate Valid August 1st thru September 30th! Redeem Rebate at bendpakrebates.spotplatforms.com Offers are valid for end-user customers in the 50 United States only, excluding schools, tech schools, or government agencies. To see Full Details & Installation Requirements Click Here
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BendPak GrandPrix™ Standard Height Lift & Turf Kit
Our standard-height GP-7 is fit for garages with 13' ceilings and offers a full 78" max rise. These dimensions are similar to other two-post lifts, but the GP-7 offers a much slimmer profile than other lifts. The BendPak Turf Maintenance Lift Accessory Kit is the most versatile utility vehicle and lawn maintenance two-post lift turf kit in existence.
Specifications: GP-7
- Capacity: 7,000 lbs
- Overall Height: 150"
- Overall Width: 125"
- Min/Max Lifting Height: 74.5" - 86.5" (+ Pad + Adapter)
- Power Unit: 220VAC / 60Hz / Single Phase
|
BendPak SP-7XE Full-Rise Frame Engaging Scissor Lift 7,000 lb.
This flush-mount version of our full-rise scissor lift is ideal for shops that are limited in space but have a huge demand for performance. The SP-7XEF has all the lifting height of a two-post lift without the columns that take up precious shop space. Features a 22” x 63” lift platform, hardened pivot pins, dual hydraulic cylinders and ergonomic controls.
Specifications: SP-7XE
- Capacity: 7,000 lbs
- Max Lifting Height: 70.5"
- Lowered Height: 6.5"
- Power Requirements: 208-240 VAC / 50-60 Hz / 1Ph
Limited Time Offer $550 Rebate Valid August 1st thru September 30th! Redeem Rebate at bendpakrebates.spotplatforms.com Offers are valid for end-user customers in the 50 United States only, excluding schools, tech schools, or government agencies. To see Full Details & Installation Requirements Click Here
|
Challenger DX77 Surface Mounted Double-Scissor Lift
Challenger Lifts new DX77 7,700 lb. capacity scissor lift was engineered with efficiency and productivity in mind. Our scissor lift can easily lift all makes and models (within rated capacity) with synchronized hydraulic system.
Specifications: DX77
- Capacity: 7,700 lbs
- Overall Width: 79-3/4"
- Overall Length:
- Lowered: 82-4/4"
- Raised: 83-1/4"
- Rise Height: 74-1/2"
- Power Requirements: 208/220v / 60hz / 3Ph
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Challenger DX77R Recessed/Flush Mounted Double-Scissor Lift
Challenger Lifts new DX77 7,700 lb. capacity scissor lift was engineered with efficiency and productivity in mind. Our scissor lift can easily lift all makes and models (within rated capacity) with synchronized hydraulic system.
Specifications: DX77R
- Capacity: 7,700 lbs
- Overall Width: 68-1/4"
- Overall Length:
- Lowered: 82-4/4"
- Raised: 83-1/4"
- Rise Height: 70"
- Power Requirements: 208/220v / 60hz / 3Ph
|
BendPak HD-973P Tri-Level Parking Lift
Meet the HD-973P, whose patent-pending design allows the storage of three vehicles in a single parking space. Plus, its independent platforms mean you can park vehicles at the height of your choice. Ideal for sedans, SUV’s and full-size trucks.
Specifications: HD-973P
- Capacity: 9,000 & 7,000
- Overall Length: 242"
- Overall Width: 110.5" & 112"
- Height of Columns: 157.75" & 161"
- Distance Between Columns: 100"
- Power Unit: 220 VAC / 60 Hz / 1 Ph
|
BendPak HD-973PX Extended Tri-Level Parking Lift
Supersize your parking capacity with this revolutionary tri-level parking lift from BendPak! This unique four-post parking lift design parks up to three vehicles in one space, instantly tripling your parking capacity. With an extended length and taller rise compared to the HD-973P, the HD-973PX has even more room for your longest and boxiest vehicles.
Specifications: HD-973PX
- Capacity: 9,000 & 7,000
- Overall Length: 252.25"
- Overall Width: 110" & 110.5"
- Height of Columns: 169.75"
- Distance Between Columns: 100"
- Power Unit: 220 VAC / 60 Hz / 1 Ph
|
|
|
Owned & Operated in the U.S. since 1987
