 |
 |
 |
|
BendPak SP-7XE Full-Rise Frame Engaging Scissor Lift 7,000 lb.
The Full-Rise, Flush-Mount Scissor Lift
The SP-7XE is a brilliant design for full-service auto shops, quick-lube pits and anyone who regularly services vehicles without much room to spare. If you need more overhead space for you and your techs, the full-rise SP-7XL might be the perfect scissor lift for you. A flush-mount option, the SP-7XLF, is also available
No Cross Member
The SP-7XE is installed and mounted on your flooring without a cross member. This makes for a true open-center design that provides access to all critical undercarriage areas without requiring operators to awkwardly stoop or crawl across the floor. Reinforced steel at the base and along the top of the runways help provide a stable lift that completely eliminates the need for a cross member or additional structural support.
Large Base Frame
The heavy-duty boxed-steel formed base frame increases stability and reduces stress on the overall structure. The elongated base provides a solid foundation for a smoother, perfectly level rise.
Electric / Hydraulic Power System
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability, and all controls are conveniently located within close reach.
Dual Master Hydraulic Cylinder
The SP-7XE car lift features two redesigned, extra-large hydraulic cylinders with integrated flow restrictors that control descent, even in the extremely rare instance of a serious hydraulic fluid leak or hose rupture. Two cylinders, one to pressurize each frame, ensure a balanced rise with every lift application.
Pneumatic Safety Locks
A single convenient operator stand allows you to release the pneumatic safety locks from a safe distance without ever worrying about manually lifting release arms or latches. The locks disengage when the lift lowers and automatically, and multiple locking positions provide operators with more service options. The locks engage or disengage at each position seamlessly with the movement of the scissor lift frames.
Hardened Pivot Pins with Zerk Fittings
Our "Zerk" grease fittings lubricate essential wear areas, important for keeping the rise and descent action of the lift smooth and safe, as well as preventing damage to the structure of your car lift. Minor weekly and monthly maintenance tasks will keep your scissor lift functioning for years to come.
Durable, Cushioned Rubber Contact Blocks
Four robust rubber blocks come standard with each full-rise lift purchase. Since our scissor lifts, like many others, engage the vehicle frame, it’s essential that the contact point is well-constructed. This comes as an after-thought to many car lift manufacturers, but not us. Our blocks are sturdy, thick and textured at the point of contact, so they never slip off the lift point when properly placed.
Detailed Installation & Maintenance Instructions
An easy-to-read owner's manual offers complete installation instructions and maintenance tips, as well as safety/caution decals that come standard with every lift purchase.
Choose Flush-Mount
The SP-7XEF is the flush-mount version of our full-rise scissor lift. If your garage has a recessed area of concrete designed to hold flush-mount lifts, you’ll be pleased by how "invisible" this lift is in your garage. When it’s collapsed, you’re free to drive over it and work around it without tripping on wires or cables. We’re proud that the collapsed SP-7XEF is extremely low-profile, but if you want to take low to virtually zero, the flush-mount version of this model is the perfect car lift solution for your garage.
|
Specifications
|
SP-7XE
|
|
Capacity
|
|
Lifting Capacity
|
7,000 lbs. (3,175 kg)
|
|
Dimensions
|
|
Overall Length
|
165" (4,190 mm)
|
|
Overall Width - Max
|
87.5" (2,222 mm)
|
|
Overall Width - Min
|
81.5" (2,072 mm)
|
|
Single Platform Length
|
62.5" (1,590 mm)
|
|
Single Platform Width
|
22" (554 mm)
|
|
Rise
|
|
Max Height Raised
|
70.5" (1,791 mm)
|
|
Lowered Lift Height
|
6.5" (165 mm)
|
|
Lifting Time
|
45 sec
|
|
Locking Heights
|
|
Fully Lowered
|
6.5" (165 mm)
|
|
1st Lock Position
|
24.75" (629 mm)
|
|
2nd Lock Position
|
37.5" (953 mm)
|
|
3rd Lock Position
|
46" (1,168 mm)
|
|
4th Lock Position
|
52.75" (1,340 mm)
|
|
5th Lock Position
|
58" (1,473 mm)
|
|
6th Lock Position
|
62.75" (1,594 mm)
|
|
7th Lock Position
|
66.5" (1,689 mm)
|
|
8th Lock Position
|
70" (1,778 mm)
|
|
Full Rise
|
70.5" (1,791 mm)
|
|
Power Unit
|
|
Motor
|
208-240 VAC / 50-60 Hz / 1Ph
|
|
Shipping
|
|
Shipping Weight
|
2,502-lbs. (1,134 kg)
|
|
Shipping Dimensions
|
106" x 27" x 43" (2,692 mm x 685 mm x 1,092 mm)
|
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult
www.autolift.org for a complete list.
LOW-RISE/MID-RISE LIFTS WARRANTY
Duration: From the date of purchase by the original Purchaser or 12-24 months from the date of shipment by BendPak or whichever comes first.
- Two Years (24-Months) Warranty on the lift structure
- One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Labor Warranty on site or at factory
- One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any BendPak Full-Rise Scissor Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by overloading lift beyond rated capacity
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber pads, pad adapters, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote
addresses.
**For all BendPak brand Low-Rise and Mid-Rise Surface Mounted Vehicle Service Lifts (excluding specialty lifts, high rise, commercial
parking, material handling, or models for particular purpose) manufactured on or following 7/27/2012.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered
damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other
than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger
under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under
these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic
consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular
purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify
these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on
www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
|
 |
|
 |
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
