Dannmar D-10/CX Two Post Lift - Scratch & Dent
(formerly Brigadier 10CX & D-10CX)
To view or download the lift inspection guide
The D-10/CX (formerly Brigadier 10CX) is ALI / ETL Certified, 10,000 lb. two-post lift that has a proven design and produces real results in virtually any service scenario. This vehicle lift is designed to be the workhorse of any automotive repair business and will prove an asset to repair facilities. The D-10/CX will give you years of trouble free service at an affordable cost. Each component of the lift was engineered better, stronger, and more economical, in order to pass the savings on to you.
The D-10/CX is a favorite among shop owners. With an overall width of 145" this auto lift will fit perfectly into most repair bays. See below for all the exciting features this lift has to offer.
Learn more about
Asymmetrical vs. Symmetrical Lifts
Automatic Arm Restraints
These arm restraints lock automatically as soon as the lift is engaged. Seizing any horizontal arm movement once elevated. Just another step in lift safety.
Automatic Shut-Off Bar
A heavy-duty steel, padded safety shutoff bar automatically stops the lifting mechanism if a vehicle touches the top of the lift. Saving you from thousands in potential damage to the car and lift.
Every Dannmar 2-Post Lift comes standard with over-sized baseplates to completely hault any back and forth sway; and greatly reduce fatigue on concrete. The bigger the footprint, the more safe the lift becomes.
Heavy-Duty Steel Cable Sheaves
The sheaves used to keep the aircraft-quality cables in line are made from heavy-duty steel, and with a 3" diameter, these are not your regular run-of-the-mill cable sheaves.
UHMW Slide-Block Load Bearings
We use ultra-high molecular weight polyethylene load bearings to protect the inside of the columns, increasing the longevity of the lifting mechanisms, and providing years of smooth, no snag, lifting.
Single-Point Safety Release
For conveniently releasing the safety locks from one side of the lift. The safety locks are in each column, spaced 3" apart. This many locking points ensures that you will find a comfortable working height, and it also is a huge step in becoming ALI approved for lift safety.
Dual-Synchro Equalization System
Our unique dual-synchro equalization system haults any side from lifting faster than the other. This ensures that the safety locks will be engaged at the same time, and also makes sure that both arms are lifted evenly at all times - reducing stress on many lift components. We purposely manufacture the columns using single-piece construction for added strength and less fatigue under heavy load conditions.
Clear Floor Workability
The clear-floor convenience of the Brigadier series lifts is just another feature directed towards the end-user. It allows for oil drains, tool boxes, transmission jacks, and many other useful pieces of equipment to be unobstructed under the lift. Making your job just that much easier.
Optional Frame Cradle Pads
Optional frame cradle adapters are the perfect solution for raising certain vans or pickups. Rubber contact pads allow for protection for underbody vehicle components and undercoating.
Baseplate Adapter Seats
These unique baseplate adapter seats will stop any worry of losing your all-too-necessary lift pad adapters. Just another way to provide ease-of-use to our customers.
Free Truck and Van Adapters
Others might charge extra for these necessary adapters, but they're standard with every Dannmar 2-Post Lift. Ideal for trucks and vans with running boards or auxiliary fuel tanks.
Industrial-Grade Power Unit
The hydraulic power unit uses a single-phase motor that requires 208-230 volts AC and a 25 amp breaker. A simple push-button switch raises the lift and a push-lever controls descent.