 |
 |
 |
|
Dannmar MB-240X Post Mount Wheel Balancer / Manual Spin
The Dannmar manual-spin wheel balancer works on wheels up to 26” diameter. Dannmar’s very accurate and dependable balancer uses proprietary Digital Sensor Technology for critical reliability and repeatability. With this science, it automatically determines the exact weight needed for optimal balance and uses brightly displayed LEDs that shows the correct amount and location of weights in about six seconds.
By easily rotating a large crank (similar in appearance to a large wing-nut) attached to the Post Mount wheel balancer’s axis, you simply spin the wheel and observe the electronic digital display of information. Then add the required weights to achieve a perfect balance. Basic spin balancing with manual operation makes this wheel balancer Dannmar’s most affordable unit.
Dannmar’s manual wheel balancer is also perfect for your high-end muscle car with matching numbers wheels and tires. Instead of having a random worker at the local tire chain store quickly hammer the weights to your vintage muscle car’s irreplaceable date-coded wheels, you can carefully install your own wheel weights. Save the tire chain repair center’s wheel balance for your daily driver. Best of all, this well-performing, manual wheel balancer is affordable.
|
Specifications
|
MB-240X
|
|
Max Tire Diameter
|
31.5” (800 mm)
|
|
Wheel Diameter Capacity
|
12” - 24” (305 mm - 610 mm)
|
|
Wheel Width Capacity
|
4” - 15” (102 mm - 381 mm)
|
|
Max. Tire Weight
|
150 lbs. (68 kg)
|
|
Balancing Modes
|
Multiple ALU Modes
|
|
Drive System
|
Ball Bearing / Manual
|
|
Wheel Braking
|
Hand Brake / Manual
|
|
Cones Included
|
Standard Cone Set
|
|
Cycle Time
|
7 seconds
|
|
Balancing Increments
|
0.25 or 0.01 ounce
|
|
Balancing Speed
|
140 RPM
|
|
Accuracy
|
+- 1 Gram (.035 oz)
|
|
Motor
|
110VAC / 50-60 Hz / 1Ph
|
The design, material and specifications are subject to change without notice.
WHEEL SERVICE EQUIPMENT WARRANTY LIMITED WARRANTY
To View or Download Dannmar's Limited Warranty Click Here
Duration: From the date of purchase by original Purchaser or 12-months months from the date of shipment by Dannmar or whichever comes first
- One Year (12‐Months) Warranty on equipment structure [*] [**]
- One Year (12‐Months) Warranty on operating components [*] [**]
- One Year (12‐Months) Free-Shipping** on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): Dannmar, 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any Dannmar brand tire changer, wheel balancer or brake lathe**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Freight charges related to warranty performance.
- Onsite labor or factory labor associated with warranty performance.
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- Any damage caused by using equipment beyond rated capacity and/or capability
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber or plastic pads/protectors, cutting tips, plastic trays, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating equipment under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or other component failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of a Dannmar product
- All electrical components are guaranteed for one year against defects in workmanship and/or materials when installed and used according to specifications
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor's option, component which is defective, hasmal functioned and/or failed to conform within duration of the warranty period. Warrantor will pay reasonable labor costs for the first 12 months only.
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records.
- In some cases, components may be required to be shipped to the nearest Dannmar Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the Products as described in the owner's manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
- *As determined by Warrantor in its sole discretion. Equipment structure is defined as any non-moving permanently affixed frame or main body, or sub-structures that are non-moving and permanently affixed or attached to any main equipment structure or frame. **For all Dannmar brand
tire changers, wheel balancers or brake lathes manufactured on or following 6/1/2020.
Limitation of Liability
Dannmar shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other than an authorized representative of Dannmar has made any attempt to service or modify the tool prior to its return to Dannmar under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages Dannmar products are provided and sold as is without any express or implied warranties including warranties of merchantability or fitness for particular purpose. No warranties, expressed or implied, will apply after this period. Dannmar may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.Dannmar.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Basic dynamic wheel balancing function
- Balance an entire set of wheels
- Check the dynamic balance of suspected out-of-balance wheels
- Low-cost of ownership
- Computerized electronic data display for each balance
- Easy to use
- Good companion equipment to a Dannmar Tire Changer
- Quiet operation
- Perfect for small garages, car-hobby garages, or a backup
- Works well on many trailer wheels too
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
