Home > Pressure Washers & Water Recovery Systems > Water Recovery & Evacuation Systems >

Hot2Go® RGV40V12 25 GPM Gas-Vac Water Transfer System - 627cc Vanguard


Hot2Go® RGV40V12 25 GPM Gas-Vac Water Transfer System 627cc Vanguard Engine
Hot2Go® RGV40V12


 

Truck Ship Only = Ships by Truck Only

List Price: $20,718.00
: $10,016.00





Product Code: RGV40V12
Qty:

Description Technical Specifications
 
Hot2Go® RGV40V12 25 GPM Gas-Vac Water Transfer System - 627cc Vanguard Engine

Capture and transfer up to 1500 gallons of water per hour from up to 350 feet away. The RGV40H is a powerful water capture and transfer system that is gas-engine driven and will recover water from over 350' away. The unique polyethylene separation tanks are non-corrosive, weigh less than others, and have full access to the inside for periodic maintenance with a quick lift-off lid. Open the large 1-1/2" valves to dump sludge / solids that collect at the bottom. Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted. A debris filter and air filter protect both the transfer pump and blower from debris.

The RGV is a powerful water capture and transfer system that has a gas engine driven blower and will pick upwater from over 350' away. The unique polyethylene separation tanks are non-corrosive, weigh less than others, and have full access to the inside for periodic maintenance with a quick lift-off lid. Open the large 11/2" valve to dump sludge/solids that collect at the bottom. Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted. A debris filter and air filter protect both the transfer pump and blower from debris.

Features
  • No outside power source required. Requires Minimum 650CCA battery Not Included
  • Vacuum and pump out simultaneously and automatic, no loss of suction or lost time dumping tanks.
  • Recovers up to 1500 GPH with 350' total hose length - Use with one or two pick up devices.
  • Light, non-corrosive vacuum tanks with lift-out baskets that collects large debris
  • Large 8-gallon fuel tank sits in frame base while keeping small footprint
  • Air throttle valve for precise control of air flow using different pick up devices or varying hose lengths
  • Requires 2" Vacuum and discharge hoses. For cold water or hot water recovery up to 200F. Consistent air induction at the pickup is needed to prevent hydraulicing.
  • 50-State CARB Compliant

Options Available

  • DHV50 50' x 2" Vacuum / Discharge hose - Other lengths available
  • ATP75 Vacuum scupper
  • ZMAT2, ZMAT6, ZMAT7 Sand berms
  • ATP40 Vacuum arch
  • ANTV5 Twister Vac surface cleaner/vacuum attachment
  • DHV51 2" Hose coupler
  • RPF15E1 15gpm filtration system option
  • ATP36 Prefilter/Solids/Sand separation tank option, use 1 or 2 per RGV

Made in USA


Browse for more products in the same category as this item:

Pressure Washers & Water Recovery Systems > Water Recovery & Evacuation Systems
Wet-Dry Vacs