 |
 |
 |
|
BendPak P9000LT Low-Rise, Open-Center, Pit-Style 9,000 lb ALI Lift
To View or download the lift inspection guide
Click Here.
The Undisputed World’s Best Pit Lift
9,000 lbs. of lift. Unobstructed access to the vehicle’s undercarriage. Optional ramps or flush-mount design. Miniscule footprint. Optional arm adapters. You know it already: this is the best low-rise car lift money can buy. Fast-lube shops have been relishing in the P-6B for years, and the best thing we could do to improve on the design was increase the weight capacity. The P-9000LT is suitable for more light trucks and SUVs than ever, and whether you choose the extended approach ramps or flush-mount option, lifting low-stance vehicles is a cinch for this lift.
Surface and flush-mount options
Whether you work in a pit or prefer to keep your low-rise lift on the ground, the BendPak P-9000LT is versatile enough to do both. Converting the flush-mount P-9000LTF into a floor model is as simple as attaching the extended approach ramps. These heavy-duty ramps are extended farther and slope very gradually, so low ground-clearance vehicles never rub against them.
The P-9000LT is made with oil-change facilities first and foremost in mind. The frame-engaging design permits full access to the wheels for tire and brake service. This makes your oil-change business a threat to competing auto shops who used to steal your wheel service. They’ll be missing all those great, profitable references once you put a full-service lift in your garage. This industry-leading lift features a 1.5 HP electric-hydraulic power unit, dual hydraulic cylinders, precision flow-divider, simple push-button controls and remote pneumatic safety locks.
Pneumatic lock release
Air locks provide a safe, instant release that efficiently permits the lowering of vehicles. A single button push is all it takes to disengage the locks and completely lower the lift in seconds flat.
Low-profile design
At just 4” high when fully lowered, the P-9000LT is one of the most space-effective models ever made. When flush-mounted, its profile virtually disappears completely.
Rugged steel channel frame
The super-wide base provides this 9,000 lbs. of lifting force with excellent support. No one matches the steel channel frame design of the P-9000LT. We’ll always be the original, but ongoing heavy-duty construction ensures we stay the best.
Solid rubber lift blocks
We don’t charge a penny extra for the rubber blocks you need to lift your or your customers’ vehicles. These rugged blocks protect vehicle undercarriages and chassis. They’re made to take as much use and abuse as your work requires.
Detailed instructions
Every BendPak lift comes complete with an easy-to-read instruction manual, space to keep service records, a guide for safe lifting and a safety/training instruction placard.
Choose flush-mount
The P-9000LTF pit lift mounts flush against the concrete. If you don’t want to see the car lift, or you simply need it out of the way in your busy garage, the ramps are completely detachable. That means if you change your mind, you can easily convert your P-9000LT into a P-9000LTF at any time.
|
Model
|
P-9000LT
|
P-9000LTF
|
|
Style
|
Low-Rise
|
Low-Rise Flush Mount
|
|
Capacity
|
|
Lifting Capacity:
|
9,000 lbs. (4,082 kg)
|
|
Rise
|
|
Max Lifting Height
|
24” (610 mm)
|
|
Max Lift Height + Blocks
|
27” (686 mm)
|
|
Time to Full Rise
|
55 seconds
|
|
Outside Dimensions
|
|
Overall Length
|
124.6” (3,165 mm)
|
74.4” (1,890 mm)
|
|
Overall Lift Platform Length
|
58.5” (1,484 mm)
|
|
Overall Lift Platform Width
|
24” (610 mm)
|
|
Lowered Height
|
4” (102 mm)
|
4" (102 mm)
|
|
Locking Heights
|
|
Fully Lowered
|
4" (102 mm)
|
|
1st Lock
|
15" (381 mm)
|
|
2nd Lock
|
19" (483 mm)
|
|
3rd Lock
|
21.5" (546 mm)
|
|
4th Lock
|
23.5" (597 mm)
|
|
Full Rise
|
24" (610 mm)
|
|
Power Unit
|
|
Motor
|
1.5 HP / 208-230 VAC / 60 Hz / 1 Ph
|
|
Shipping
|
|
Weight
|
1,502-lbs. (681 kg)
|
1,134-lbs. (514 kg)
|
|
Dimensions
|
77" x 40" x 24"
(1,943 mm x 1,016 mm x 609 mm)
|
77" x 60" x 24"
(1,943 mm x 1,534 mm x 609 mm)
|
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV (Current Edition) or ANSI/UL 201. Consult
www.autolift.org for a complete list.
LOW-RISE/MID-RISE LIFTS WARRANTY
Duration: From the date of purchase by the original Purchaser or 12-24 months from the date of shipment by BendPak or whichever comes first.
- Two Years (24-Months) Warranty on the lift structure
- One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Labor Warranty on site or at factory
- One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any BendPak Full-Rise Scissor Lift**
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by overloading lift beyond rated capacity
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber pads, pad adapters, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote
addresses.
**For all BendPak brand Low-Rise and Mid-Rise Surface Mounted Vehicle Service Lifts (excluding specialty lifts, high rise, commercial
parking, material handling, or models for particular purpose) manufactured on or following 7/27/2012.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered
damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other
than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger
under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under
these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic
consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular
purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify
these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on
www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
https://bendpakcs.freshdesk.com/a/tickets/new
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 9,000-lb. lifting capacity
- Reinforced parallel lifting arms to better support inboard loading
- Reinforced upper lift platform to better support inboard loading
- Dual-pump power unit with built in proportioning valve
- Easily convert fast-lube pits into wheel service work bays
- Mounts outside the pit rail without interfering with center work area
- Model P-9000LTF flush-mount provides recessed drive-over option
- Heavy duty 1.5 HP electric-hydraulic power unit
- Electronic push-button controls allow smooth, single-hand operation
- Automatic multi-position safety locks with air release deliver safe, remote operation
- Powder-coat finish
- Durable rubber-topped pad surface and rubber lift blocks provide quick set-up
- Enhanced adjustable (optional) lifting arms
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
Owned & Operated in the U.S. since 1987
