Home > Frame Machine > Frame Machine Accessories >

Chassis Liner Quick Anchoring Truck Adapters


Chief/Chassis Liner CL784201
Chassis Liner CL784201


 
: $2,378.00




Product Code: CL784201

Shipping Costs Required

Yes, I Understand this is a Plus Shipping Item & I will be contacted w/shipping costs

Qty:  
Description
 
Quick Ratchet Truck & SUV Anchoring System

The most efficient method of anchoring full frames. The ratchet & strap design create a positive anchor even in the tightest spaces. The versatility of the Pivot Assemblies and Truck Holders ensure that even the toughest frames can be anchored.

Setting Up the System on a Straight Rail


STEP 1
Place the eye of the nylon strap around the upright of the Truck Holding System.

Slide the Ratchet Assembly into the Drive-over Base.

A - Truck Holder
B - Upright
C - Truck Extension
D - Strap Eye
E - Ratchet Assembly
F - Drive-Over Base


STEP 2
Wrap the Nylon Strap over the vehicle’s frame rail, push the strap through the Ratchet and use the Chrome Winch Bar to tighten up the strap

A - Example of a Frame Rail B - Strap Eye


STEP 2
(Alternative “Loop” Method)

This is an example of an alternative method of “Looping” the eye to clear low obstacles such as running boards. Simply feed the strap through the eye before pushing the strap through the ratchet

Note: It might be necessary to rotate the Ratchet Assembly 180 degrees to help clear low obstacles.

A - Example of a Frame Rail
B - Strap Eye


STEP 3
After tightening up the Nylon Strap, use a chain binder to help support the Truck Holding System to the bed of the frame rack.

A - Chain Binder

Setting Up the System on an Angled Rail
In these examples the Right & Left Pivot Shaft Assemblies are shown. The Pivot Shafts were designed to accommodate frame rails that are angled, such as near the wheel well.

STEP 1
Place the eye of the nylon strap around the upright of the Truck Holding System.

Slide the Ratchet Assembly into the Drive-over Base.

A - Example of a Frame Rail
Pivot Holder
Strap Eye
Ratchet Assembly


STEP 1
(Alternative “Loop” Method)

This is an example of an alternative method of Looping” the eye to clear low obstacles such a running boards.

Simply feed the strap through the eye before pushing the strap through the ratchet.

A - Example of a Frame Rail
B - Strap Eye

Note: It might be necessary to rotate the Ratchet Assembly 180 degrees to help clear low obstacles.

C - Example of Ratchet turned 180 degrees


STEP 2 & 3
After tightening up the Nylon Strap, use a chain binder to help support the Truck Holding System to the bed of the frame rack.

A - Chain Binder

Features
  • (2) Right Pivot Shaft Assembly, #685000
  • (2) Left Pivot Shaft Assembly, #685010
  • (2) Left Truck Holder, #241905
  • (2) Right Truck Holder, #241915
  • (4) Ratchet Assembly, #685005
  • (4) 4" Strap, 96" Long, #241935
  • (4) 4" Strap, 48" Long, #241930
  • (4) Truck Extension, #241855
  • (1) Chrome Winch Bar, #241879


Browse for more products in the same category as this item:

Frame Machine > Frame Machine Accessories