 |
 |
 |
|
OMITEC, Inc. PDAUSS2000 Ultrasound Inspection Kit /w Headphones
The PDAUSS2000 is an ultrasound diagnostic tool that detects ultrasound in a narrow frequency band centered at 40,000 Hz.
The receiver detects the ultrasound and converts it so that human can hear the corresponding sound through the headphones. The user is able too pinpoint the source of the ultrasound because the receiver has a direction reception. The headset also serves to reduce or mask out ambient sound. the user can then better concentrate on the converted ultrasound - indication the operating condition of working components, pressure or vacuum leaks and electrical damage.
The PDAUSS2000 identifies defects while equipment is operating. It is non-destructive and non-invasive.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- The PDAUSS2000 detects ultrasound generated by operating equipment.
- There are two ways to use the PDAUSS2000 receiver:
- ln the scan mode the PDAUSS2000 receives ultrasound through air without contacting the unit under test.
- ln the contact mode, one of the solid probes is attached to the PDAUSS2000 receiver and is in contact with the unit under test.
- ln the scan mode, the PDAUSS2000 allows the user to detect and pinpoint vacuum leaks, pressure leaks in compressed air, steam and other gas systems, and electrical arcing or discharge.
- ln the contact mode, the PDAUSS2000 allows the user to distinguish the ultrasound generated by individual internal components such as bearings, gears, valves, solenoid valves, cylinders, actuators, etc. By distinguishing the ultrasound of individual components, the user is able to determine changes in the operating condition of those components very early in the failure process.
- Detecting ultrasound and pinpointing its source usually takes a few seconds to a minute.
Includes
- Receiver with attachments
- Headphones
- Transmitter
- Case
|
|
|
|
|
|
|
Owned & Operated in the U.S. since 1987
