Home > Pressure Washers > Water Recovery & Evacuation Systems >

Hot2Go® RGV40H 25 GPM Gas-Vac Water Transfer System


Hot2Go® RGV40H 25 GPM Gas-Vac Water Transfer System - Recovers Water up to 350' away
Hot2Go® RGV40H


 

Truck Ship Only = Ships by Truck Only

: $6,480.00




Product Code: RGV40H
Qty:

Description Technical Specifications
 
Hot2Go® RGV40H 25 GPM Gas-Vac Water Transfer System - Recovers Water up to 350' away

Capture and transfer up to 1500 gallons of water per hour from up to 350 feet away. The RGV40H is a powerful water capture and transfer system that is gas-engine driven and will recover water from over 350' away. The unique polyethylene separation tanks are non-corrosive, weigh less than others, and have full access to the inside for periodic maintenance with a quick lift-off lid. Open the large 1-1/2" valves to dump sludge / solids that collect at the bottom. Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted. A debris filter and air filter protect both the transfer pump and blower from debris.

The RGV is a powerful water capture and transfer system that has a gas engine driven blower and will pick upwater from over 350' away. The unique polyethylene separation tanks are non-corrosive, weigh less than others, and have full access to the inside for periodic maintenance with a quick lift-offlid. Open the large 11/2" valve to dump sludge/solids that collect at the bottom. Each separation tank has an automatic transfer system which pumps the water out to your bulk tank, landscape, or sanitary sewer where permitted. A debris filter and air filter protect both the transfer pump and blower from debris.

Features
  • Requires 2) 120VAC / 15A outlets or 2000W generator. Requires Minimum 650CCA battery
  • Vacuum and pump out simultaneously and automatic, no loss of suction or lost time dumping tanks.
  • Recovers up to 1500 GPH with 350' total hose length - Use with one or two pick up devices.
  • Light, non-corrosive vacuum tanks with lift-out baskets that collects large debris
  • Large 8-gallon fuel tank sits in frame base while keeping small footprint
  • Requires 2" Vacuum and discharge hoses. For cold water or hot water recovery up to 200F. Consistent air induction at the pickup is needed to prevent hydraulicing.
  • 50-State CARB Compliant

Options Available

  • DHV50 50' x 2" Vacuum / Discharge hose
  • DHV51 2" Hose coupler

Made in USA

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Pressure Washers > Water Recovery & Evacuation Systems
Wet/Dry Vacuums