|
Auto Lift AL2-9K-FP 9,000 lb. Capacity Symmetric 2 Post Car Lift
|
|
Auto Lift AL2-9K-AC 9,000 lb. Capacity Asymmetric 2 Post Car Lift
|
|
|
|
|
|
 |
| Specifications |
AL2-9K-FP |
| Lifting capacity |
9,000 lbs. |
| Overall height |
111.5" |
| Overall width |
134" |
| Lifting height |
75.5" |
| Power unit |
2HP 220V 20A |
| Truck adapters |
Yes |
|
|
A quality automotive lift capable of lifting 9,000 lbs. from Auto Lift
|
|
|
 |
| Specifications |
AL2-9K-AC |
| Lifting capacity |
9,000 lbs. |
| Overall Height |
142" |
| Overall width |
134" |
| Lifting Height |
75.5" |
| Power unit |
2HP 220V 20A |
| Truck adapters |
Yes |
|
|
Quality asymmetric two post auto lift manufactured by Autolift.
|
|
|
|
|
Auto Lift AL2-7K-AC 7,000 lb. Capacity 2 Post Car Lift | Two Post Lift
|
|
Auto Lift Car Park 8 8,000 lb. 4 Post Car Storage and Service Lift |Parking Lift
|
|
Our Price: $1,325.00
|
|
|
|
|
|
 |
| Specifications |
AL2-7K-AC |
| Lifting capacity |
7,000 lbs. |
| Overall Height |
142" |
| Overall width |
134" |
| Lifting Height |
72" |
| Power unit |
2HP 220V 20A |
| Truck adapters |
Yes | |
AL-2-7K-AC Asymmetric 2 Post Car Lift
A quality asymmetric two post automotive lift by Auto Lift.
|
|
|
|
| Specifications |
Car Park 8 |
| Lifting capacity |
8,000 lbs. |
| Overall Height |
86 1/4" |
| Overall Width |
103 1/2" |
| Inside Column |
94.5" |
| Runway Width |
19" |
| Runway Length |
165.5" |
| Max Clearance (top lock) |
70" |
| Power unit |
1HP 110v 20A |
|
|
8,000 lb. capacity and large 3" cylinder, one-piece diamond-plate runways and scratch-resistant powder coat paint. The clearance between the column posts are about 6 inches wider than most hobbyist lifts.
- Free Caster Kit
- Free Jack Tray
|
|
|
|
|
Auto Lift AL2-12K-CD 12,000 lb. Capacity 2 Post Clear Floor Direct Drive Car Lift
|
|
BendPak HD-9STX 9K lb. Narrow Width, High Lift Service / Parking Lift
|
|
|
|
|
|
 |
| Specifications |
AL2-12K-CD |
| Lifting capacity |
12,000 lbs. |
| Overall Height |
165" |
| Overall width |
151.125" |
| Lifting Height |
5.5" - 72" |
| Power unit |
2HP 220V |
| Truck adapters |
Yes | |
AL-12K-CD Clear Floor 2 Post Car Lift
A quality direct drive two post automotive lift by Auto Lift. |
|
|
|
| Specifications |
HD-9STX |
| Lifting capacity |
9,000 lbs. |
| Overall Height |
100" |
| Overall Width |
103-3/4" |
| Inside Column |
89 3/4" |
| Runway Width |
19" |
| Runway Length |
188" |
Max Clearance
|
82" |
| Power unit |
220v/60 Hz. 1Ph. |
|
|
|
| • |
9,000 pound lifting capacity
Runway length 188" |
| • |
Clearance between post 89-3/4" |
| • |
Clearance under runway on the top lock. |
| • |
Perfect for PARKING, STORAGE or SERVICE. |
|
|
|
|
|
BEND-PAK LIFT JACKS RJ-7
|
|
BendPak HD-9 Four Post Lift 9K lb. Capacity | Bend Pak HD 9 4 Post Lift
|
|
|
|
|
|
7,000 LBS Automotive Lift with open center.
Works with BendPak HD-14 series alignment lifts.
|
 |
| Specifications |
HD-9 |
| Lifting capacity |
9,000 lbs. |
| Overall Height |
88" |
| Overall Width |
117" |
| Inside Column |
106-3/4" |
| Runway Width |
19" |
| Runway Length |
164" |
| Max Rise |
70" |
| Power unit |
220v/60 Hz. 1Ph. | |
|
|
| • |
9,000 pound lifting capacity |
| • |
Runway Length 164" |
| • |
Clearance between post 106" |
| • |
Clearance under runway on top lock 70" |
| • |
Perfect for PARKING, STORAGE or SERVICE. |
| |
|
|
|
BendPak HD-9XW Four Post Storage and Service Lift | 9K lb Parking Lift
|
|
BendPak XPR-10 Clearfloor 10,000 lb. Capacity, Dual-Width
|
|
|
|
|
|
|
|
| Specifications |
HD-9XW |
| Lifting capacity |
9,000 lbs. |
| Overall Height |
100" |
| Overall Width |
120 3/4" |
| Inside Column |
106 3/4" |
| Runway Width |
19" |
| Runway Length |
188" |
Max Clearance
|
82" |
| Power unit |
220v/60 Hz. 1Ph. | |
|
|
| • |
9,000 pound lifting capacity |
| • |
Runway length 188" |
| • |
Clearance between post 106" |
| • |
Clearance under runway on top lock 82" |
| • |
Perfect for PARKING, STORAGE or SERVICE. |
| |
|
 |
| Specifications |
XPR-10 |
| Lifting capacity |
10,000 lbs. |
| Overall Height |
145" |
| Overall width |
132" - 145" |
| Lifting Height |
69" |
| Power unit |
220VAC 60Hz Single Phase |
| Truck adapters |
Yes | |
The BendPak XPR-10 offers exceptional direct-drive lifting performance and clearfloor convenience. This super-industrial-strength piece of equipment has got it all: cutting-edge technology, top of the line materials, design that's ahead of its time and a 10,000 pound lifting capacity. Fits in shops with ceilings higher than 12', and it won't crowd your floor while you work beneath a vehicle.
|
|
|
|
BendPak XPR-10A Asymmetric 10,000 lb. Capacity, Dual-Width 2 Post Car Lift
|
|
BendPak HD-9XL Four Post Lift 9,000 lb. Capacity Extra Wide, Standard Height, Long Car Runway
|
|
|
|
|
|
 |
|
Specifications |
XPR-10A |
|
Lifting capacity |
10,000 lbs. |
|
Overall Height |
145" |
|
Overall width |
132" - 145" |
|
Lifting Height* |
79" |
|
Power unit |
220VAC 60Hz Single Phase |
|
Truck adapters |
Yes |
* With 6" truck adapters. |
The BendPak asymetrical XPR-10A two post lift offers exceptional direct-drive lifting performance with an important added benefit. BendPak rotated both posts inward to give you the ability to open a vehicle's doors while it's still raised, all without sacrificing drive-thru clearance.
|
|
|
|
| Specifications |
HD-9XL |
| Lifting capacity |
9,000 lbs. |
| Overall Height |
70" |
| Overall Width |
116 3/4" |
| Overall Length |
224" |
| Runway Width |
19" |
| Runway Length |
188" |
Max Clearance
|
82" |
| Power unit |
220v/60 Hz. 1Ph. | |
|
|
| The HD-9XL is your 9,000-lb. rugged lifting solution if you need lift a car or truck with a wider and / or longer wheel base. Perfect for vehicle storage and service¡ªat the shop or in the garage. Whether you're a service professional or a DIY'er, BendPak's got the right lift for you. This model is available with optional casters, dip-trays, jack platform and more. |
| |
|
|
|
Coats 5035E Tire Changer with Coats 1000 Wheel Balancer Combo
|
|
Wheel Dolly - Dannmar Smart Carts Vehicle Dollies | Model: Dannmar-129106
|
|
|
|
|
|
 |
 |
| Specifications |
5035E |
| Max. wheel diameter |
40" |
| Max. wheel width |
10" |
| Rim Diameter Inside |
15" - 22" |
| Rim Diameter Outside |
12" - 19" |
|
| |
| Built for the tire shop that is looking to do a top-notch job on a dime, the Coats 5035E offers an affordable way to expand your wheel service capabilities and your customer base. |
|
|
Vehicle Wheel Dolly (set of two) - 1000 Lb. capacity per auto cart
|
|
|
Direct Lift Rotisserie
|
|
Flo-Dynamics VACFILL3 Coolant Machine
|
|
|
List Price: $2,656.00 Our Price: $1,747.98
|
|
|
|
|

This auto body rotisserie is great for automotive restoration on a car or truck and works on most vehicle frames.
|
Fast vacuum drain and fill
|
|
|
Motorvac TransTech 1000 Transmission Fluid Exchange
|
|
Nationwide NW-660 Tire Changer with NW-953 Wheel Balancer Combo
|
|
|
|
|
|
|
The TransTech 1000 is designed to perform a fast and basic automatic transmission fluid exchange, and do it using a very simple process.
|
|
|
|
Nationwide NW-950 Tire Changer with NW-953 Wheel Balancer Combo
|
|
Nationwide NW-980MR Tire Changer with NW-953 Wheel Balancer Combo
|
|
|
|
|
|
|
|
|
|
|
Nationwide NW-530 Tire Changer with NW-1030 Wheel Balancer Combo
|
|
Nationwide NW-530 Tire Changer with NW-953 Wheel Balancer Combo
|
|
|
|
|
|
|
The TC-530 is a great machine for a small shop on a tight budget combined with a top performing wheel balancer.
|
The TC-530 is a great machine for a small shop on a tight budget combined with a top performing wheel balancer.
|
|
|
OTC 3484 Genisys 04 Deluxe Kit w/Asian 03 & ABS / Air Bag 02 Software
|
|
Ranger Model RML-750HD Motorcycle Lift
|
|
|
|
|
|
|
The Genisys scan tool with Pathfinder 2004 Software is ready for the emerging domestic CAN (Controller Area Network) protocols.
Note: Some applications require a smart cable (sold separately).
|
 |
| Specifications |
RML-750HD |
| Lifting capacity |
1,650 lbs. |
| Runway length |
80.5" |
| Overall width |
29.5" - 53" |
| Lifting height |
43" |
| Power unit |
Air/Hydraulic |
|
This motorcycle lift comes with side extensions, front extension and tire vise.
|
|
|
|
Underhoist Stands - Ranger Jack Stand | Model: RJS-1T
|
|
Brake Lathe - Ranger | Model: RL 8500
|
|
|
|
|
|
|
Ranger RL8500 complete lathe package is an excellent value that includes lathe, bench, adapters, and other helpful accessories.
|
|
|
Floor Jack - 2 Ton, Long Reach, Low Profile | Model: Ranger RFJ-2TX
|
|
Floor Jack - Ranger 10 Ton Long Frame | Model: RFJ-10TL
|
|
|
|
|
|
|
Floor Jack RFJ-2TX by Ranger is an extra long, low profile floor jack for extended reach under car and light truck chassis that features quick-lift pedal for fast lifting.
|
This long-chassis floor jack is designed for heavy-duty lifting applications (such as truck fleets, bus garages, farms and heavy construction equipment) requiring access to very low areas.
|
|
|
Ranger Model RML-600 Motorcycle Lift
|
|
Ranger 2 Ton Folding Shop Crane
|
|
|
|
|
|
 |
| Specifications |
RML-600 |
| Lifting capacity |
1000 lbs. |
| Runway length |
84" |
| Overall width |
24" |
| Lifting height |
31 1/2" |
| Power unit |
Air Operated |
|
The design of this motorcycle and ATV lift platform is legendary. Dependable pneumatic design provides years of trouble-free performance.
|
|
Heavy-duty folding engine hoist has a lifting range from 1” to 93” and features a 4-hole position boom, heavy-duty 8-ton long ram, 6 wheels for added mobility and foldable design for easy storage.
|
|
|
Ranger Durable Three - Tray Tool Cart
|
|
Ranger Swivel Top, Adjustable Work Table
|
|
|
|
|
|
|
Durable three-tray service cart with locking wheels and convenient push-pull tubular handle.
|
Durable three-tray service cart with locking wheels and convenient push-pull tubular handle.
|
|
|
Jack Stands - Ranger 12-Ton Pair | Model: RJS-12T
|
|
Jack Stands - Ranger 3-Ton Pair | Model: RJS-3T
|
|
|
|
|
|
|
Ranger jack stands provide a safe and secure way to support vehicles once lifted and during undercar maintenance. Our safety ratchet and pin-type stands are built using heavy steel and large support saddles. They are intended to be used in pairs for automotive and fleet service as well as agricultural and construction equipment service facilities.
|
Ranger jack stands provide a safe and secure way to support vehicles once lifted and during undercar maintenance. Our safety ratchet and pin-type stands are built using heavy steel and large support saddles. They are intended to be used in pairs for automotive and fleet service as well as agricultural and construction equipment service facilities.
|
|
|
Underhoist Stands - Ranger 2-Ton Tripod | Model: RJS-2TH
|
|
Ranger 2000 Lb. Folding Engine Stand
|
|
|
|
|
|
|
Two-ton capacity high-position tripod under-hoist stand features a low 55” height and adjusts to 87” tall. ACME all thread rod adjustment for varied load heights.
|
Sturdy wide-base design prevents tipping when holding engine blocks. Front swivel castors allow you to move and position engine exactly where you need. Four adjustable arms and 360 degree rotation allow for easy mounting.
|
|
|
Ranger Engine Support, 1,500 Lbs. Capacity
|
|
Oil Drain - Ranger 18-Gallon Portable w/ Pump & Drain Valve | Model: RD-18G
|
|
|
|
|
|
|
1500-lb.capacity engine support has adjustable threaded chain hook and is used from wheel well to wheel well to help support engines when working on the transmission or dropping a sub-frame. Telescoping side foot-pads adjust to fit different width engine compartments. Easy to use and a real money and time saver.
|
Ranger oil drains are the easiest way to drain waste oil or other fluids. Unique wide-bodied design eliminates tipping and assures proper balance. Constructed of rugged, heavy duty translucent polyethylene for strength, durability and easy viewing of oil level. Ranger oil drains will resist rust, dents, automotive fluids and other chemicals.
|
|
|
RANGER DST-2420 Wheel Balancer with 47" Max. Tire Diameter
|
|
Tire Changer - Ranger NextGen™ Series | Model: R23AT
|
|
|
|
|
|
 |
| Specifications |
DST-2420 |
| Max. tire diameter |
47" |
| Max. tire weight |
145 lbs. |
| Max Rim Diameter |
10"-24" |
| Wheel width |
2"-18" |
|
The Ranger DST2420 wheel balancer is a highly accurate and dependable no-frills balancer that features our proprietary Digital Sensor Technology for critical reliability and repeatability.
|
|
 |
| Specifications |
R23AT |
| Max. wheel diameter |
41" |
| Max. wheel width |
4"-18" |
| Rim Diameter Inside |
11.5"-24" |
| Rim Diameter Outside |
10"-22" |
|
The Ranger R23AT Tire Changer is a high end tilt tower machine designed to handle the needs of heavy
volume tire shops. A supersize turntable provides an internal clamping capacity of 24" and external clamping capacity of 22".
|
|
|
|
Tire Changer - Ranger NextGen™ Series Tilt-Back 23" | Model: R23LT
|
|
Ranger R23LT Tilt Back Tire Changer, 23 with DST-2420 Wheel Balancer Combo
|
|
|
|
|
|
 |
| Specifications |
R23LT |
| Max. wheel diameter |
47" |
| Max. wheel width |
5"-18" |
| Internal Clamping |
11.5" - 24" |
| External Clamping |
10" - 22" |
|
The Ranger R23LT is a high end tilt tower tire machine designed to handle the needs of heavy volume tire shops. A sturdy body, rigid 45mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the chance of expensive wheels getting damaged.
|
|
The Ranger R23LT is a high end tilt tower machine designed to handle the needs of heavy volume tire shops. A sturdy body, rigid 45mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the chance of expensive wheels getting damaged.
|
|
|
|
Tire Changer - Ranger 21" Capacity RimGuard | Model: R745
|
|
Ranger R745 21" Capacity NextGenTM Tire Changer with Ranger DST-2420 Wheel Balancer Combo
|
|
|
|
|
|
 |
| Specifications |
R745 |
| Max. wheel diameter |
26" |
| Max. wheel width |
12" |
| Rim Diameter Inside |
12" - 21" |
| Rim Diameter Outside |
10" - 18" |
|
The R745 has a supersized turntable that provides an internal clamping capacity of 21" and external clamping capacity of 18". With a long list of time-saving features
|
|
|
The Ranger R745 is a rigid tower tire machine designed to handle the needs of heavy volume tire shops. A sturdy body, rigid 45mm hexagonal vertical shaft, and hardened-steel horizontal outrigger support arm eliminates flex during all tire service procedures to reduce the chance of expensive wheels getting damaged. |
|
|
|
Tire Changer - Ranger NextGen™ Series | Model: R26DT
|
|
RANGER R26DT Tire Changer with DST-2420 Heavy Duty Wheel Balancer Combo
|
|
|
|
|
|
 |
 |
| Specifications |
R26DT |
| Max. wheel diameter |
47" |
| Max. wheel width |
3" - 15" |
| Rim Diameter Inside |
14.5" - 28" |
| Rim Diameter Outside |
12.5" - 26" |
|
The Easiest Way to Change Low Profiles, Run Flats and Alloy Wheels.
|
|
 |
 |
| Specifications |
R26DT |
| Max. wheel diameter |
47" |
| Max. wheel width |
3" - 15" |
| Rim Diameter Inside |
14.5" - 28" |
| Rim Diameter Outside |
12.5" - 26" |
|
The Easiest Way to Change Low Profiles, Run Flats and Alloy Wheels.
|
|
|
|
Tire Changer - Ranger NextGen™ | Model: R26AT
|
|
Ranger R26AT 26" NextGen™ Tire Changer with DST-2420 Wheel Balancer Combo
|
|
|
|
|
|
 |
 |
| Specifications |
R26AT |
| Max. wheel diameter |
47" |
| Max. wheel width |
3" - 15" |
| Rim Diameter Inside |
14.5" - 28" |
| Rim Diameter Outside |
12.5" - 26" |
|
You can now have 26" of external clamping performance without the need for clumsy adapters or cumbersome tabletop adjustments.
|
|
 |
 |
| Specifications |
R26AT |
| Max. wheel diameter |
47" |
| Max. wheel width |
3" - 15" |
| Rim Diameter Inside |
14.5" - 28" |
| Rim Diameter Outside |
12.5" - 26" |
|
You can now have 26" of external clamping performance without the need for clumsy adapters or cumbersome tabletop adjustments.
|
|
|
|
Tire Changer - Ranger NEXTGEN | Model: R980XR
|
|
Tire Changer - Ranger NEXTGEN™ Swing-Arm | Model: R980NXT
|
|
|
|
|
|
 |
| Specifications |
R980XR |
| Max. wheel diameter |
50" |
| Max. wheel width |
3" - 15" |
| Internal Rim Clamping Cap. (inner pos.) |
11.5"- 24" |
| External Rim Clamping Cap. (inner pos.) |
10" - 22" |
| Internal Rim Clamping Cap. (outer pos.) |
13" - 25.5" |
| External Rim Clamping Cap. (outer pos.) |
11.5" - 23.5" | |
The NEW Ranger R980XR tire changer is a high productivity tire machine perfectly suited for large-volume tire shops and repair centers. A host of innovations make the new NextGen™ series, R980XR one of the most durable, and ergonomically engineered tire changers ever. |
|
 |
| Specifications |
R980NXT |
| Max. wheel diameter |
50" |
| Max. wheel width |
3"- 15" |
| Internal Rim Clamping Cap. (inner pos.) |
11.5" - 24" |
| External Rim Clamping Cap. (inner pos.) |
10" - 22" |
| Internal Rim Clamping Cap. (outer pos.) |
13" - 25.5" |
| External Rim Clamping Cap. (outer pos.) |
11.5" - 23.5" | |
The Ranger R980NXT is built to last and well-suited for high-volume tire shops and repair centers with advanced power assist capabilities, the R980NXT stands ready to service anything from standard steel wheels to challenging low-profile tires and large luxury wheels. |
|
|
|
Tire Changer - Ranger NEXTGEN™ | Model: R30XLT
|
|
Transmission Jack - 2,000 lb Telescoping | Model: Ranger RTJ-1
|
|
|
|
|
|
 |
| Specifications |
R30XLT |
| Max. wheel diameter |
50" |
| Max. wheel width |
5"- 22" |
| Internal Rim Clamping Cap. (inner pos.) |
13" - 33" |
| External Rim Clamping Cap. (inner pos.) |
10" - 28" | |
Ranger’s new R30XLT combines traditional swing arm tire changer elements with advanced power assist capabilities to service everything from standard steel wheels to challenging low-profile tires on large luxury wheels. |
|
Transmission Jack RTJ-1 from ranger is fully adjustable. Saddle tilts four ways.
|
|
|
Transmission Jack - 3,000 lb Telescoping | Model: Ranger RTJ-3000
|
|
Floor Jack - 2-1/4 Ton, Professional | Model: Ranger RFJ-214T
|
|
|
|
|
|
|
Transmission Jack RTJ-3000 from Ranger has a heavy lifting capacity and its durable construction lets you safely and easily remove, transfer and install vehicle transmissions, transaxles and other drive-train components from passenger cars, vans and light trucks.
|
Ranger floor jacks are designed to meet the diverse lifting needs of professional service technicians. They exceed ANSI standards for performance and safety.
|
|
|
Floor Jack - 3 Ton , Professional | Model: Ranger RFJ-3TP
|
|
Floor Jack - 3 Ton, Quick Pump | Model: Ranger RFJ-3TQP
|
|
|
|
|
|
|
The RFJ-3TP floor jack features alloy-plated ram and heavy steel construction for maximum durability.
|
Floor Jack RFJ-3TQP from Ranger is a 3-ton capacity, Quick-pump floor jack that rises to chassis in just one pump for the ultimate in jacking speed and convenience.
|
|
|
Floor Jack - 3 Ton, Plunger-U-Joint Design | Model: Ranger RFJ-3T
|
|
Floor Jack - 3,000 lb. Aluminum Racing Quick Jack | Model: Ranger RFJ-3000AL
|
|
|
|
|
|
|
Floor jack RFJ-3T by Ranger is a professional grade 3-ton floor jack with flanged side plates for increased strength.
|
Floor Jack RFJ-3000AL by Ranger is a dependable, lightweight service jack crafted out of aircraft grade billet aluminum. Reaches full height in just four quick pumps!
|
|
|
Floor Jack - 3 Ton Capacity Low Rider | Model: Ranger RFJ-6HD
|
|
Floor Jack - 3,000Lb. Super Long Reach Low Rider | Model: Ranger RFJ-3000LPF
|
|
|
|
|
|
|
Floor jack RFJ-6HD "low rider" by Ranger effortlessly lifts 3 tons.
|
Floor Jack RFJ-3000LPF Low Rider by Ranger has 3,000 lb. lifting capacity and a super long reach.
• Long reach chassis.
• Low‐profile design accommodates low ground‐clearance vehicles.
• Swivel casters for easy mobility.
|
|