 |
 |
 |
|
BendPak XPR-10C Clearfloor 10,000 lb. Capacity, Narrow 2 Post Car Lift
The BendPak XPR-10C Clearfloor 10,000 lb. Capacity, Narrow 2 Post Car Lift Features:
Our newest line of BendPak XPR-Series hydraulic two-post lifts, offer a wide selection of durable, safe and reliable systems for virtually every lifting application. Powerful and safe, BendPak's XPR-Series lifts offer incredibly rapid lift speeds, with plenty of features to increase efficiency and productivity and with fewer serviceable parts and less necessary maintenance, the results are lower operating expenses and higher productivity. These rugged lift models easily have the capacity to safely lift your largest full-size pick-ups and commercial vehicles yet still provide specific lifting capability for sport and compact
vehicles, both foreign and domestic. You'll find the new XPR-Series lifts are the perfect addition to your shop if you're looking to make more money in less time than ever before.
The XPR-Series is a reflection of BendPak's continuing commitment to producing lifts of only the highest value, maximum safety and utmost reliability. Featuring the most advanced engineered technology available in the industry, these lifts are built to provide engineered safety factors for safe operation well above normal OSHA/ALI/ETL requirements. The XPR-Series includes a wealth of standard and optional features to benefit the operator's need for performance and safety. Combined with BendPak's tradition of rugged, reliable construction, the XPR-Series has become the new industry benchmark others are surely to follow.
Whatever your requirements, there's a BendPak XPR-Series two-post lift designed to meet your needs. The XPR-Series offer an abundant menu of options, and accessories that allows you to fully tailor your lift to your specific needs. But long before you start looking at options, you'll be impressed with the long list of standard features and capabilities packed into every BendPak XPR-Series lift.
Getting the right lift for your application is easy with the help of your local BendPak dealer or by investigating the many customer focused product materials found on our website.
MODEL - XPR-10C
|
| Lifting Capacity* |
10,000 Lbs. / 4536 Kg. |
*Max Capacity / Front Axle
|
5,000 Lbs. / 2268 Kg. |
*Min Capacity / Rear Axle
|
5,000 Lbs. / 2268 Kg. |
| Height Overall(*): |
145" / 3683 mm. |
| Width Overall (Outside of Base Plate): |
132" / 3353 mm. |
| Width (Outside of Columns): |
124" / 3150 mm. |
| Floor to Overhead Switch(*): |
141" / 3581 mm. |
| Inside Columns: |
102" / 2591 mm. |
| Reach (Front Arm Min.): |
25" / 635 mm. |
| Reach (Front Arm Max.): |
46" / 1168 mm. |
| Reach (Rear Arm Min.): |
34" / 864 mm. |
| Reach (Rear Arm Max.): |
55" / 1397 mm. |
| Min. Pad Height: |
4" / 102 mm. |
| Rise: |
69" / 1753 mm. |
| Max Lift Height (Pad Only): |
73" / 1854 mm. |
| Max Lift Height (6" Adapter): |
79" / 2007 mm. |
| Drive-Thru Clearance: |
93" / 2362 mm. |
| Motor (**): |
220 VAC / 60 Hz. 1Ph. |
| Time of full Rise: |
45 Seconds |
| Max Load per Arm: |
2,500 Lbs. / 1134 Kg. |
|
|
* An optional bolt-on top extension for columns raises the overhead bar an
additional 24". Must be ordered from factory at time of order. |
| ** Special voltages available upon request. |
| The design, material and specifications are subject to change without notice. |
SHIPPING DIMENSIONS
- Dimensions (L x W X H) - 151" x 18" x 51" / 3835 mm. x 457 mm. x 1295 mm.
- Shipping Weight - 1,736 Lbs. / 789 Kg.
Better Products – Better Service – Better Value
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
a Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
a Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
a One Year (12-Months) Labor Warranty on site or at factory
a One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- And damage caused by overloading lift beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc product
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. **For all BendPak brand two-post and four-post surface mounted lifts manufactured on or following 1/1/2011.
Limitation of Liability
In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
10,000-lb. lifting capacity
Padded overhead safety shutoff bar
Wide or narrow drive-thru configuration
Single-piece columns
Single-point safety release
Drop-end arms provide a lower pad height
Dual hydraulic direct-drive cylinders
Oversized 53" tall carriage for superior strength and durability
Electric / hydraulic power system
Large, 17" x 19" A36 steel base plate
Self-lubricating dura-glide UHMW polyethylene bearing system
Safety locks in each column spaced every 3"
Automatic arm restraints
Heavy-duty 3/8" aircraft-quality equalizer cables
Oversized cable sheave diameter reduces cable fatigue
8-piece truck and van adapter set comes standard
Triple-telescoping arms provide increased range for lifting point access
Versatile drop-in contact pads with stackable adapters
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
