 |
 |
 |
|
BendPak PL-7000XR Two-Post Parking Lift / Deck / Extended Rise / 98" O.A. Width 7,000-lb. Capacity
If you want to make the most out of your limited parking space, whether it's personal or commercial, then you need a premium parking lift. BendPak has the solution: the PL-7000XR 2-Post auto stacker parking lift elegantly makes your parking spaces work twice as hard for you. It’s minimal footprint allows for multiple installations within limited spaces for maximum space efficiency. Plus, with the extended height, this lift can easily accommodate taller vehicles, taking your parking capabilities to new heights. With a 7,000-lb. capacity, dual-hydraulic cylinder, wide-deck platform and integrated key-activated power switch; the PL-7000XR parking lift represents unparalleled convenience and versatility for just about any parking situation. But what else would you expect from BendPak?
When you run out of space to pack 'em, stack 'em! The BendPak PL-7000XR 7,000-lb. capacity parking lift adds exceptional expansive capabilities to just about any private garage or commercial parking lot. Capable of lifting and storing passenger vehicles and light trucks, this parking lift definitely pulls its weight. A post height of under 11' makes the PL-7000XR viable for lower ceilings, while the smaller footprint design keeps the floor clear and lets you place multiple lifts in tight rows. As with all BendPak products, safety is our primary concern, so the PL-7000XR is made out of only the highest-quality materials.
Here at BendPak, we make it our business to not only build quality products, but also to constantly improve them to incorporate more features, more convenience and better technology than anyone else in the market. Our features are constantly being copied by other manufacturers who try to keep their costs down by not bothering to do their own engineering. But we've spent the last 40 years building a solid reputation and relationship with our cherished clients, and we refuse to do anything to jeopardize that. Why gamble on some unknown parking lift? Always bet on BendPak for the very finest automotive service equipment. It's a sure thing.
|
Specifications
|
PL-7000XR
|
|
Lifting Capacity*
|
7,000 lbs. / 3,175 kg
|
|
Overall Length
|
173-1/2" / 4,405 mm
|
|
Platform Length
|
157-1/2" / 4,001 mm
|
|
Overall Width
|
98" / 2,489 mm
|
|
Platform Width
|
85" / 2,165 mm
|
|
Overall Height
|
131" / 3,327 mm
|
|
Overall Rise
|
85" / 2,159 mm
|
|
Lifting Time
|
55 sec
|
|
Motor
|
220 VAC / 60 Hz / 1 Ph
|
*Not all BendPak lift models meet the standards as prescribed by ANSI/ALI ALCTV-2006 or ANSI/UL 201. Consult www.autolift.org for a complete list.
COMMERCIAL PARKING LIFT WARRANTY
Duration: From the date of purchase by the original Purchaser or 12‐24 months from the date of shipment by BendPak or whichever comes first.
- Two Years (24-Months) Warranty on the lift structure
- One Year (12-Months) Warranty on the hydraulic cylinder(s) and power unit
- One Year (12-Months) Warranty on operating components
- One Year (12-Months) Labor Warranty on site or at factory
- One Year (12-Months) Free-Shipping* on ground‐freight charges related to warranty performance
Limited Warranty
1. Who gives this warranty (Warrantor): BendPak Inc., 1645 Lemonwood Dr., Santa Paula, CA 93060
2. Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
3. What products are covered by this warranty: Any BendPak Commercial Parking Lift or Vehicle Stacker **
4. What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
5. What is not covered under this warranty:
a. Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
b. Any damage caused by overloading lift beyond rated capacity
c. Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
d. Items considered general wear parts such as rubber pads, pad adapters, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
e. Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
f. Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
g. Rusted components due to improper maintenance or corrosive environments
h. Cosmetic defects that do not interfere with product functionality
i. Damage due to incorrect voltage or improper wiring
j. Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc. product
k. All electrical components are guaranteed for one year against defects in workmanship and/or materials when the lift is installed and used according to specifications.
6. Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
7. Responsibilities of Purchaser under this warranty:
a. Provide dated proof of purchase and maintenance records
b. In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12‐months, must be borne by the Purchaser.
c. Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
8. When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free‐shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote
addresses.
**For all BendPak brand Commercial Parking Lift or Vehicle Stacker (excluding specialty lifts, material handling, or models for
particular purpose) manufactured on or following 7/27/2012.
Limitation of Liability
BendPak/Ranger shall have no obligation pursuant to this Warranty with respect to products which in our sole judgment have been altered
damaged, misused, abused, badly worn, lost or improperly maintained. This Warranty is null and void if the customer or any other person other
than an authorized representative of BendPak/Ranger has made any attempt to service or modify the tool prior to its return to BendPak/Ranger
under this Warranty. In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under
these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic
consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular
purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify
these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on
www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- 7,000-lb. lifting capacity auto stacker parking lift
- Minimum footprint allows multiple installations in limited space
- Independent lifting structures allows for staggered installation
- Galvanized deck construction resists environmental damage and protects vehicle
- Power-unit and controls integrated within lift structure
- Freestanding design reduces tax and permit liabilities in most counties
- Overhead power unit provides smooth quiet hydraulic operation
- Wide-deck platform accommodates pickups, vans and cars
- Designed for installation on typical parking surfaces
- Durable construction for maximum stability
- Dual hydraulic cylinders and heavy-duty lifting chain
- Dual synchronization chains keeps the deck level under all conditions
- Automatic safety lock
- Maintenance-free composite carriage bearings
- Maintenance-free self-lubricating chain rollers
- Wide-base plate mounts directly on grade, even on asphalt
- No special site preparation required for installation
- Optional audible / visual descent alarm available
- Standard integrated key-activated power on / off switch
|
|
|
|
|
|
|
|
|
Owned & Operated in the U.S. since 1987
