 |
 |
 |
|
BendPak HD-14TL 14,000 lb. Tall 4 Post Lift, 82" Rise | High Rise Lift
The BendPak HD-14TL 14,000 lb. Tall 4 Post Lift, 82" Rise | High Rise Lift Features:
BendPak's "HD-Series" four-post lifts are engineered to meet the demands of even the toughest professionals. Designed into every "HD-Series" lift are key features that make them the absolute best you can buy, a long list of features that improve safety, durability and productivity. These commercial-grade lifts are second to none and have become benchmarks throughout the world for quality and dependability.
- Dependable design - four heavy-duty high quality stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
- Dual-hub cable sheaves - they cost us more to make but we feel it's well worth it. Reduces stress and fatigue on axles, sheaves and cables.
- Multi-level locking positions - each lift is equipped with multiple adjustable height locking positions for multi-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
- Heavy duty aircraft cable - each lift is supplied with four high quality stainless steel lifting cables rated at 26,000 pounds each. All lifting cables are fully enclosed within lift structure.
- Electric / hydraulic power system - each lift is designed using a maintenance-free electric hydraulic power system for ultimate dependability. All controls are conveniently located within easy reach.
- Large baseplates - 12" x 12" base plates provide solid stability.
Features
- 14,000 pound lifting capacity
- Runways include rail kit for optional accessories
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks, and sheaves
- Internal "anti-sway" slider blocks in each column
- Pneumatic push-button safety release
- Features heavy-duty 1/2" aircraft cable
- Safety locks enclosed in columns minimize pinch points
- Oversized sheave diameter reduces cable fatigue
- Rugged, self-lubricating cable sheaves combined
with 1-1/4" sheave axles are fully enclosed minimizing pinch points
- Multi-position safety locks in each column
- Power unit can be located at the front or rear of the lift
- Approach ramps incorporate built-in rear-wheel chocks
- Independent "back-up" slack-cable safety latches.
- Optional drive-thru ramps available.
- Optional drip trays available
- Optional 7000 pound capacity rolling jacks available
Specifications
| HD-14TL |
| Lifting Capacity* |
14,000 lbs. / 6350 Kg. |
| Overall width |
126" / 3200 mm. |
| Outside length |
205" / 5207 mm. |
| Overall length |
235" / 5969mm. |
| Height of columns |
100" / 2540 mm. |
| Min. Runway height |
7-1/2" / 190 mm. |
| Max. Rise |
82" / 2083 mm. |
| Max. Lifting height |
89]1/2" / 2273 mm. |
| Width between columns |
116" / 2946 mm. |
| Runway width |
20" / 508 mm. |
| Width between runways(*) |
37" - 49" / 940 mm. – 1245 mm. |
| Length of runways |
198" / 5029 mm. |
| Locking positions |
17 |
| Lock spacing |
every 4" / 102 mm. |
| Lifting time |
65 Seconds |
| Standard motor (**) |
220 VAC / 60 Hz. 1Ph. | * This dimension may be limited with the addition of rolling jacks. See rolling jack specifications on separate page. ** Special Voltages Available Upon Request The design, material and specifications are subject to change without notice. Shipping Information
- Dimensions - 204" x 22" x 40" / 5182 mm. x 559 mm. x 1016 mm.
- Shipping Weight - 2105 lbs. / 955 kg.
Better Products – Better Service – Better Value
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
a Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
a Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
a One Year (12-Months) Labor Warranty on site or at factory
a One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- And damage caused by overloading lift beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc product
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. **For all BendPak brand two-post and four-post surface mounted lifts manufactured on or following 1/1/2011.
Limitation of Liability
In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
