 |
 |
 |
|
BendPak HDS-18A 18K lb. Four Post Alignment Rack | HD 18A 4 Post Lift
The BendPak HDS-18A 18K lb. Four Post Alignment Rack | HD 18A Lift 4 Post Auto Lift Features:
Model: HDS-18A
Manufacturer: Bend-Pak
Weight: 4865.00
The HD-18A is a four-post runway style, alignment lift designed for full size commercial vehicles.
- 18,000 pound lifting capacity
- Runways include rail-kit for optional accessories
- Electric/hydraulic power system
- Single 5" diameter hydraulic cylinder mounted underneath runway
- Internal Anti-Sway slider blocks in each column
- Optional drive-thru ramps available
- Optional 30" ramp extensions available
- Runways include rail-kit for optional accessories
- Features heavy-duty aircraft cable
- Oversized self-lubricating cable sheaves
- Rugged 4" main sheave axles
- Multi-position safety locks in each column
- Multi-position, adjustable height safety locks in each column
- Ramps feature non-skid surface
- Push-button safety release
- Runways adjust for different tread widths
- Optional drive-thru ramps available
- Optional runway extensions are available
- Optional 9K, 12K, 15K-pound capacity rolling jacks available
This heavy-duty four-post lift brings safety, durability and ruggedness to a whole new level. A commercial-grade lift that is second to none and built to last.
The long list of design features include:
Dependable design - four heavy-duty high quality stainless steel lifting cables and a single hydraulic cylinder mounted underneath the runway makes this lift the most durable, maintenance-free lifting system on the market.
12" diameter cable sheaves - maybe they are a tad bit on the large size but these super size sheaves will add years of service life to the lifting cables. The larger the sheaves, the longer the life of the cables.
Multi-level locking positions - each lift is equipped with multiple adjustable height locking positions for multi-height parking. A convenient push-button pneumatic safety lock control releases all four independent safety locks simultaneously.
Heavy duty aircraft cable - each lift is supplied with four high quality stainless steel lifting cables rated at 26,000 pounds each. All lifting cables are fully enclosed within lift structure.
Electric/hydraulic power system - each lift is designed using a maintenance-free electric hydraulic power system for ultimate dependability. All controls are conveniently located within easy reach.
Large baseplates - 12" x 12" base plates provide solid stability.
Single hydraulic cylinder - each lift is equipped with a single 5" diameter hydraulic cylinder hidden away under the runway for maximum performance and reliability and minimum exposure to elements. Our industrial-grade hydraulic cylinders feature a one-piece, pilot fitted, machined steel piston wrapped with specially designed, pressure loaded U-cup piston seals, backups and wear bands that virtually eliminates any fluid bypass. The micro-smooth chrome-rod is machined from high yield, ground & polished C-1045/50 micro-alloy steel and plated to a minimum of .001? diametrically, to ensure superior cylinder operation
and life. Specially designed, high durometer, mechanically loaded rod seals virtually eliminate rod seal leakage and a specially formulated abrasion resistant urethane rod wiper provides exclusion protection. The welded cylinder body is made from high yield-strength steel tubing produced to exceed ASTM specifications. This combination of superb base material and superior processing ensures straight, smooth and long duty life cylinders. An integrated flow restrictor provides a controlled descent in the case of an unexpected hose rupture.
Durable Powder Coat Finish - All HD-Series lifts feature a durable powder coat finish that gives the metal a high-quality, extremely durable finish which can withstand even the harshest environmental or chemical conditions. Unlike other companies that claim to powder coat, we take pride in our meticulous 10-step process. First, all parts are visually inspected then sandblasted. After, the parts are washed in our five-stage phosphate tanks that can accommodate parts up to 25' long. Once cleaned, theyre immediately dried, to avoid rust production then outgassed. Outgassing is a process we take pride in which pre-bakes
the parts in a curing oven, reducing the possibility of blemishes that may be hiding in the pores of the metal. If not properly outgassed, imperfections in the metal may bubble during the curing process and most likely cause chips in the powder. After the parts are washed and outgassed, any surfaces and/or threaded holes that need to be masked or plugged are done so with high-temperature masking tape and silicone plugs. Next, the parts are given a quick thinner wipe to remove any light debris or fingerprints then hung on an electrostatically grounded conveyor line. The powder is then applied using an electrostatic spray
gun. The powder sticks to the parts similar to how dust sticks to a television screen. Once the parts are powder coated, the carts are rolled into our curing oven and baked at 400 degrees for 15 for 45 minutes.
Integrated design - lifting cables, airlines, safety latches and sheaves are all fully enclosed.
Non-skid runways - sure grip even when the runway surface is wet or oily.
Longer approach ramps - these approach ramps were designed a little longer to help when loading low ground clearance vehicles. A little bit that makes a big difference. Automatic safety locks - aircraft-quality stainless steel and aluminum pneumatic cylinders release all four locks simultaneously with the simple push of a button. The spring-loaded safety locks automatically engage continuously when raising the lift. For added safety a secondary lock system acts as a slack-cable device automatically engaging in the event of an unexpected cable failure. Lifting cables,airlines, safety latches and sheaves are all fully
enclosed within lift structure.
|
| Model |
HDS-18A |
| lifting Capacity |
18,000 Lbs. / 8,165 Kg. |
| A- Overall Width |
154" / 3,912 mm. |
| B- Outside Length |
201" / 5,105 mm. |
| C- Overall Length |
241" / 6121 mm. |
| D- Height of Columns |
93" / 2,362 mm. |
| E- Min. Runway Height |
8-1/2" / 216 mm. |
| F- Max. Rise |
60" / 1524 mm. |
| G- Max. Lifting Height |
68-1/2" / 1740 mm. |
| H- Width Between Columns |
134" / 3404 mm. |
| I- Runway Width |
22" / 559 mm. |
| J- Width Between Runways(*) |
38" - 48" / 965 mm. - 1219 mm. |
| K- Length of Runways |
203" / 5,156 mm. |
| Locking Positions |
9 |
| Lock Spacing |
Every 6" / 152 mm. |
| Lifting Time |
75 Seconds |
| Standard Motor (**) |
220 VAC / 60 Hz. 1Ph. |
| |
|
|
|
Rugged Construction |
Optional Runway Extensions |
|
|
|
Optional DP-30
Rolling Drip Tray |
Optional Air/Electric
Work Station |
* This dimension is limited with the addition of rolling jacks.
** Special Voltages Available Upon Request
|
Better Products – Better Service – Better Value
Duration: From the date of purchase by the original Purchaser or 60-24-12 months from the date of shipment by BendPak or whichever comes first.
a Five Years (60-Months) Bumper-to-Bumper Warranty on the lift structure
a Two Years (24-Months) Warranty on the hydraulic cylinder(s) and power unit
a One Year (12-Months) Labor Warranty on site or at factory
a One Year (12-Months) Free-Shipping* on ground-freight charges related to warranty performance
Limited Warranty
- Who gives this warranty (Warrantor): BendPak Inc., 1645 lemonwood dr. Santa Paula, CA 93060
- Who receives this warranty (Purchaser): The original Purchaser (other than for purpose of resale)
- What products are covered by this warranty: Any BendPak Two-Post or Four-Post car lift**
- What is covered under this warranty: manufacturer defects due to material and/or workmanship with the exceptions noted below.
- What is not covered under this warranty:
- Any failure that results from Purchaser’s abuse, neglect or failure to operate, maintain or service product in accordance with instructions provided in the owner’s manual(s) supplied
- And damage caused by overloading lift beyond rated capacity
- Items or service normally required to maintain the product, i.e. lubricants, oil, etc.
- Items considered general wear parts such as rubber pads, lifting cables, etc. unless wear or failure is a direct result of manufacturer defect due to material and/or workmanship
- Any component damaged in shipment or any failure caused by installing or operating lift under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings
- Motor or pump failure caused by rain, excessive humidity, corrosive environments or other contaminants
- Rusted components due to improper maintenance or corrosive environments
- Cosmetic defects that do not interfere with product functionality
- Damage due to incorrect voltage or improper wiring
- Any incidental, indirect, or consequential loss, damage, or expense that may result from any defect, failure, or malfunction of BendPak Inc product
- Responsibilities of Warrantor under this warranty: Repair or replace, at Warrantor’s option, component which is defective, has malfunctioned and/or failed to conform within duration of the warranty period. BendPak Inc. will pay reasonable labor costs for the first 12 months only
- Responsibilities of Purchaser under this warranty:
- Provide dated proof of purchase and maintenance records
- In some cases, components may be required to be shipped to the nearest BendPak Authorized Service Center. Freight costs, after 12-months, must be borne by the Purchaser.
- Use reasonable care in the operation and maintenance of the products as described in the owner’s manual(s).
- When Warrantor will perform repair or replacement under this warranty: Repair or replacement will be scheduled and serviced according to the normal work flow at the servicing location, and depending on the availability of replacement parts.
*Free-shipping applies to direct shipping points within the 48 continental United States. Rural area shipping surcharge may apply for remote addresses. **For all BendPak brand two-post and four-post surface mounted lifts manufactured on or following 1/1/2011.
Limitation of Liability
In no event will either party be liable for any damage caused by the other party's failure to fulfill its responsibilities under these terms and conditions. In no event will either party be liable for any lost profits, lost savings, incidental damage, or other economic consequential damages. All expressed and implied warranties, including the implied warranties of merchantability and fitness for a particular purpose, are limited in duration to the coverage period. No warranties, expressed or implied, will apply after this period. BendPak may modify these terms and conditions at any time by either providing the customer with written notice or posting such revised terms on www.bendpak.com. Such revised terms shall be effective thirty days from the date of such written notice or posting.
|
|
|
 |
|
 |
|
|
| Accessories for this product... |
|
|
|
|
