2 post lift up to 10000 lb

You are here: Home > 2 Post Lifts

Choose a sub category:

Accessories

Sort By:

Page of 1

Auto Lift AL2-9K-FP 9000 LB 2 Post Auto Lift

Auto Lift AL2-9K-AC 9000 LB 2 Post Auto Lift

Our Price: $1,495.00

Auto Lift AL2-9K-FP 9000 LBS 2 Post Auto Lift

Auto Lift AL2-9K-AC 9000 LB 2 Post Auto Lift

9,000 lb. capacity Auto lift. Comes with heavy-duty leaf chain, the steel pulleys, the high-strength cable equalization system and everything you’d expect from a quality lift.

9000 lb capacity Auto Lift has a heavy-duty leaf chain, the steel pulleys, the high-strength cable equalization system and everything you�d expect from a quality lift.

DIRECT-LIFT HR8000

Direct Lift OH8000

Our Price: $1,795.00

The Direct Lift HR8000 is a base-plate style two post car lift with symmetric columns and symmetric arm configuration.

The Direct Lift OH8000 is an overhead style two post car lift with symmetric columns and asymmetric arms.

Pro 9000D 9,000 LBS 2 POST

Auto Lift AL2-11K-ACD 11000 LBS 2 Post Lift

Our Price: $1,895.00

Our Price: $1,995.00

Auto Lift AL2-11K-ACD 11000 LBS 2 Post Lift

Direct-Lift Pro9D has single point release, set of truck adapters, overhead above ground lift configuration, asymmetric arms, and additional sliding lift pads.

Auto Lift AL2-11K Series Lifts:

� Direct-Pull Lifting � High efficiency,

low maintenance technology

� Closed loop hydraulic system preventing

hydraulic contamination

� Powder coat, oven baked finish more durable

than conventional coatings

� Padded shut-off bar

� High tech gear style arm restraints

� Low profile arms

� Includes truck adapters

� Dual safety release system
.

Hanmecson 10 VSM

BendPak XPR-9FD 9,000 lb., Floorplate, Direct-Drive, Narrow, Triple-Telescope, Drop-End Arms

Our Price: $2,095.00

List Price: $3,075.00
Our Price: $2,670.00

BendPak XPR-9FD 9,000 lb. 2-Post Lift, Floorplate, Chain-Over, Narrow, Triple-Telescope, Drop-End Arms

The Nationwide 10VSM two post above ground lift has single point release, overhead above ground configuration, asymmetric/symmetric arm configuration.

For shipping information click on more info or picture.

BendPak's 9,000-pound capacity XPR-Series lifts are also available with specialty arm configurations to increase productivity.

This Lift is ALI and ETL Approved

BendPak XPR-9F

BendPak XPR-10C Two Post Lifts, 10,000 Lbs., Clear-Floor XPR-10C

Our Price: $2,675.00

BendPak XPR-10C Two Post Lifts, 10,000 Lbs., Clear-Floor XPR-10C

BendPak's 9,000-pound capacity XPR-Series lifts are also available with specialty arm configurations to increase productivity.

This Lift is ALI and ETL Approved

Our newest line of XPR-Series two-post lifts, offer a wide selection of durable, safe and reliable systems for virtually every lifting application.

This Lift is ALI and ETL Approved

BendPak XPR-10AC Two Post Lifts, 10,000 Lbs., Assymetric

FORWARD I10

Our Price: $2,680.00

Our Price: $2,695.00

BendPak XPR-10AC Two Post Lifts, 10,000 Lbs., Clear-Floor XPR-10C

Our asymmetric models XPR-10AC and XPR-10ACX feature 30-degree, rotated columns that provide added door-opening clearance helping to minimize costly damage to customer vehicles.

This Lift is ALI and ETL Approved

Highest Lifting arms. Giving you 77" maximum pad height 13.5 Ft Clearance Perfect For Vans & Commercial Trucks 11'5" Wide-7'9"

BendPak XPR-10CX

BendPak XPR-10ACX

Our Price: $2,745.00

Our Price: $2,750.00

Our asymmetric models XPR-10AC and XPR-10ACX feature 30-degree, rotated columns that provide added door-opening clearance helping to minimize costly damage to customer vehicles.

This Lift is ALI and ETL Approved

Our asymmetric models XPR-10AC and XPR-10ACX feature 30-degree, rotated columns that provide added door-opening clearance helping to minimize costly damage to customer vehicles.

This Lift is ALI and ETL Approved

BendPak XPR-9FDX 9,000 lb., Floorplate, Direct-Drive, Wide, Triple-Telescope, Drop-End Arms

BendPak XPR-9FX 9,000 lb., Floorplate, Chain-Over, Wide, Triple-Telescope, Drop-End Arms

List Price: $3,195.00
Our Price: $2,775.00

BendPak XPR-9FDX 9,000 lb. 2-Post Lift, Floorplate, Chain-Over, Wide, Triple-Telescope, Drop-End Arms

BendPak XPR-9FX 9,000 lb., Floorplate, Chain-Over, Wide, Triple-Telescope, Drop-End Arms

BendPak's 9,000-pound capacity XPR-Series lifts are also available with specialty arm configurations to increase productivity.

This Lift is ALI and ETL Approved

BendPak's 9,000-pound capacity XPR-Series lifts are also available with specialty arm configurations to increase productivity.

This Lift is ALI and ETL Approved

FORWARD 9000B 9,000 lbs Two-Post Lifts

FORWARD DP10A 10,000 lbs Two-Post Lifts

Our Price: $2,795.00

Most of our lifts are third party certified & labeled by a nationally recognized testing laboratory, ETL to ensure they meet or exceed all applicable ANSI standards. Look for the gold label.

This Lift is ALI and ETL Approved

Most of our lifts are third party certified & labeled by a nationally recognized testing laboratory, ETL to ensure they meet or exceed all applicable ANSI standards. Look for the gold label.

This Lift is ALI and ETL Approved

Auto Lifts AL2-12K-FP Heavy-Duty 12,000lb. Capacity Two Post Lift

Auto Lift AL2-15K-C Heavy Duty 15000 LB capacity 2 Post Lift

Our Price: $2,895.00

Our Price: $2,995.00

Auto Lifts AL2-12K-FP Heavy-Duty 12,000lb. Capacity Two Post Lift

Auto Lift AL2-15K-C Heavy Duty 15000 LB capacity 2 Post Lift

Dual 3" cylinders with low friction chain rollers

"Big Foot" base plates for extra stability

Low profile arm restraints

Durable powder coat paint finish

Free hardware

Dual 3" cylinders with low friction chain rollers

"Big Foot" base plates for extra stability

Automatic electric override

Free hardware

Powder coat paint finish .

Hanmecson 12VSM 12000 12,000 LBS 2 POST LIFT

ROTARYLIFT 2 Post

Our Price: $2,995.00

Our Price: $3,795.00

Hanmecson 12 VSM 12000 12,000 LBS 2 POST LIFT

The Nationwide 12000 is the largest two post above ground lift that we manufacture.This is a commercial grade lift designed to accommodate both long wheel base trucks and passenger cars.

For shipping information click on more info or picture.

2 Post 10,000 LBS Rotary Lift

Uni-body construction
Visually marked pick-up points on the vehicle
Wider wheelbase and lower profile
A short or long wheelbase

BendPak XPR-12FD

Bend-Pak XPR-12C

Our Price: $4,100.00

Our Price: $4,545.00

This Lift is ALI and ETL Approved

These Super-Duty models are the brutes among our two-post lineup � heavy-duty lifts designed for serious lifting.

This Lift is ALI and ETL Approved

FORWARD DPO12 2 Post Heavy Duty Lift

BendPak XPR-15C

Our Price: $5,395.00

Our Price: $6,010.00

Forward� lifts are designed in the United States by U.S. engineers.

This Lift is ALI and ETL Approved

Our asymmetric models XPR-10AC and XPR-10ACX feature 30-degree, rotated columns that provide added door-opening clearance helping to minimize costly damage to customer vehicles.

This Lift is ALI and ETL Approved

BendPak XPR-18C Two Post Lifts, 18,000 Lbs., Clear-Floor

FORWARD DPO15 2 Post Heavy Duty Lift

Our Price: $6,590.00

Our Price: $6,850.00

BendPak XPR-18C Two Post Lifts, 18,000 Lbs., Clear-Floor

6,000 LBS Automotive Lift with open center

This Lift is ALI and ETL Approved

Forward� lifts are designed in the United States by U.S. engineers.