 |
 |
 |
|
Forward Lift DP10S Extra Wide 10,000 lb. Symmetric 2 Post Auto Lift
The Forward Lift DP10S Extra Wide 10,000 lb. Symmetric 2 Post Auto Lift 2 Post Auto Lift Features:
|
 • Forward™ lifts are designed in the United States by U.S. engineers.
• Forward Lift's worldwide manufacturing locations are
ISO9001 Quality Systems certifi ed ensuring you the best quality products. 
• Most of our lifts are third party certifi ed & labeled by a nationally recognized testing laboratory, ETL to ensure they meet or exceed all
applicable ANSI standards. Look for the gold label. |
• Forward™ lifts are designed in the United States by U.S. engineers.
• Forward Lift's worldwide manufacturing  locations are ISO9001 Quality Systems certified ensuring you the best quality products.
• Most of our lifts are third party certifi ed & labeled by a nationally recognized testing laboratory, ETL to ensure they meet or exceed all applicable ANSI standards. Look for the gold label.
Spot-Rite™ 3-Stage Front Arm Design:
The DP10A features offset arms to accommodate vehicles both symmetrically and asymmetrically. This feature allows the technician to position the vehicle doors in front of or behind the column to prevent door damage.
|
Features of Forward DP10S Series Lifts:
- Features symmetrical column design
- Direct-Pull Lifting - high efficiency, low maintenance technology
- Closed loop hydraulic system - preventing hydraulic contamination
- Powder coat, oven baked finish - more durable than conventional coatings
- Third party tested by ETL and certifed by ALI
- Padded shut-off bar
- Spring operated arm restraints, disengage at floor level
- Low profile arms
- Includes truck adapters
- Single point release lock in each column, resets on upstroke
- Optional high rise and extended height available
|
 |
|
Low-Profile Design:
The DP10 features low-profile / oversized
pads with multiple extensions to raise most
vehicles on the road today. Includes four
each of the following extensions: 1.5", 3" and 6" 
|
|
|
Engineering ExcellenceForward Lift products are
engineered to perform and built
to last. Forward's U.S. engineers
have over 29 years of combined
experience designing automotive
lifts for service and repair shops.
Forward's philosophy is to own our
designs rather than use someone
else's off the shelf product.
|
Product Integrity21st century design tools allow
us to create, control and validate
our designs to ensure maximum
performance. Forward lifts are
rigorously tested to meet quality
and durability standards. All
product families are proof load
tested to 1½ times rated capacity
and rigorously cycle tested.
|
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
| Specifications |
DP10S Extra Wide |
| Capacity |
10,000 lbs. |
| Overall Height |
143-3/8" (3642 mm) **
167" (4242 mm) |
| Height to Shut-Off |
136" (3454 mm)
160" (4064 mm) |
| Minimum Ceiling Height |
144" (3658 mm)
168" (4268 mm) |
|
Minimum Adapter Height
(standard adapters) |
3-5/8" (93 mm) |
|
Maximum Lifting Height
High Rise (HR) Model Only |
77" (1956 mm)
86" (2184 mm) |
|
Adapter Extension Heights (stack type) |
1-1/2" (38 mm), 3" (76 mm), and 6" (152 mm) |
| Front Arm Reach |
38-3/8" - 52-7/8" (584 mm - 1130 mm) |
| Rear Arm Reach |
38-3/8" - 52-7/8" (978 mm - 1473 mm) |
| Overall Floor Width |
131" (3327 mm) or optional |
| Inside Column Width |
109-3/4" (2788 mm) |
| Drive Through |
99" (251 mm) |
| Power Unit |
208/230v single phase motor (3-phase optional) |
| Amps |
20 |
| Motor |
2 HP |
|
| Specifications subject to change without notice or liability |
| ** Overall height and width reflects standard setting. Alternative setting may be available, refer to installation instructions or consult factory for details. |
|
|
|
|
|
|
|
|
| Accessories for this product... |
|
|
|
|
